Search Linux Wireless

Re: carl9170 - monitor mode TP drop

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thursday, April 26, 2012 09:45:22 AM Janusz Dziedzic wrote:
> W dniu 25 kwietnia 2012 20:54 użytkownik Christian Lamparter
> So, what steps you suggest?
> I would like to record traffic from channel 6 and would like to not
> have this SNIFFER ACK.
> 
> This is what I tried:
> - ifconfig wlan0 up (no matter if up or down)
> - iw phy phy0 interface add moni0 type monitor
> - iw phy phy0 set channel 6
> - ifconfig moni0 up
> 
> After last step I still see TP drop between AP and STA1 on channel6
Uh that's right. it was:

iw phy0 interface add moni type monitor flags none

the "flags none" is the important bit.

Regards,
	Christian
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux