On Wed, Apr 11, 2012 at 12:41 PM, Yegor Yefremov <yegor_sub1@xxxxxxxxxxxxxxxx> wrote: > Am 11.04.2012 12:25, schrieb Luciano Coelho: >> Hi Yegor, >> >> On Wed, 2012-04-11 at 12:14 +0200, Yegor Yefremov wrote: >>> continuing our yesterdays discussion on IRC I try to summarize my >>> results. >>> >>> First of all I calibrated my WLAN card via ti-utils as described here >>> http://linuxwireless.org/en/users/Drivers/wl12xx/calibrator using >>> calibrator plt calibrate. >>> >>> Then I integrated this nvs file into kernel, so I have no longer these >>> nasty errors. >>> >>> Still I cannot ping anything. Here you can see the end of >>> wpa_supplicant's log: >>> >>> WPA: Installing PTK to the driver. >>> wpa_driver_nl80211_set_key: ifindex=3 alg=2 addr=0x42a48 key_idx=0 set_tx=1 seq_len=6 key_len=32 >>> addr=5c:d9:98:f9:30:d9 >>> EAPOL: External notification - portValid=1 >>> State: 4WAY_HANDSHAKE -> GROUP_HANDSHAKE >>> RSN: received GTK in pairwise handshake - hexdump(len=34): [REMOVED] >>> WPA: Group Key - hexdump(len=32): [REMOVED] >>> WPA: Installing GTK to the driver (keyidx=1 tx=0 len=32). >>> WPA: RSC - hexdump(len=6): b1 7c 0d 00 00 00 >>> wpa_driver_nl80211_set_key: ifindex=3 alg=2 addr=0x2a443 key_idx=1 set_tx=0 seq_len=6 key_len=32 >>> WPA: Key negotiation completed with 5c:d9:98:f9:30:d9 [PTK=TKIP GTK=TKIP] >>> Cancelling authentication timeout >>> Removed BSSID 5c:d9:98:f9:30:d9 from blacklist >>> State: GROUP_HANDSHAKE -> COMPLETED >>> CTRL-EVENT-CONNECTED - Connection to 5c:d9:98:f9:30:d9 completed (reauth) [id=1 >>> id_str=] >>> wpa_driver_nl80211_set_operstate: operstate 0->1 (UP) >>> netlink: Operstate: linkmode=-1, operstate=6 >>> EAPOL: External notification - portValid=1 >>> EAPOL: External notification - EAP success=1 >>> EAPOL: SUPP_PAE entering state AUTHENTICATING >>> EAPOL: SUPP_BE entering state SUCCESS >>> EAP: EAP entering state DISABLED >>> EAPOL: SUPP_PAE entering state AUTHENTICATED >>> EAPOL: Supplicant port status: Authorized >>> EAPOL: SUPP_BE entering state IDLE >>> EAPOL authentication completed successfully >>> RTM_NEWLINK: operstate=1 ifi_flags=0x11043 ([UP][RUNNING][LOWER_UP]) >>> RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added >>> EAPOL: startWhen --> 0 >>> EAPOL: disable timer tick >>> >>> Any ideas? As i told before both 2.6.37 and 3.3-rc7 made no problems. >> Hard to say. From these logs everything seems to be working fine. What >> IP address are you using? Are you sure your routes are all set up >> correctly? Do you get any messages in the kernel logs, TX stuck >> watchdog, maybe? > > As soon as I replace 3.4 with 2.6.37 pings go through. > > # ifconfig wlan0 > wlan0 Link encap:Ethernet HWaddr 00:04:D9:80:55:02 > inet addr:192.168.1.239 Bcast:192.168.1.255 Mask:255.255.255.0 > UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 > RX packets:5 errors:0 dropped:0 overruns:0 frame:0 > TX packets:4 errors:0 dropped:0 overruns:0 carrier:0 > collisions:0 txqueuelen:1000 > RX bytes:737 (737.0 B) TX bytes:568 (568.0 B) > > # route -n > Kernel IP routing table > Destination Gateway Genmask Flags Metric Ref Use Iface > 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 wlan0 > > #dmesg > wl12xx: firmware booted (Rev 6.3.5.0.98) > wlan0: authenticate with 5c:d9:98:f9:30:d9 > wlan0: send auth to 5c:d9:98:f9:30:d9 (try 1/3) > wlan0: authenticated > wlan0: associate with 5c:d9:98:f9:30:d9 (try 1/3) > wlan0: RX AssocResp from 5c:d9:98:f9:30:d9 (capab=0x431 status=0 aid=2) > wlan0: associated I made debugging on Pandaboard: Jan 1 00:09:55 buildroot user.info kernel: dynamic_debug:ddebug_exec_queries: processed 1 queries, with 225 matches, 0 errs Jan 1 00:10:28 buildroot user.debug kernel: wl12xx: mac80211 start Jan 1 00:10:28 buildroot user.debug kernel: wl12xx: mac80211 add interface type 2 mac de:ad:be:ef:00:00 Jan 1 00:10:29 buildroot user.debug kernel: wl12xx: MBOX ptrs: 0x4cf80 0x4cfc0 Jan 1 00:10:29 buildroot user.debug kernel: wl12xx: MBOX ptrs: 0x4cf80 0x4cfc0 Jan 1 00:10:29 buildroot user.debug kernel: wl12xx: available tx blocks: 99 Jan 1 00:10:29 buildroot user.info kernel: wl12xx: firmware booted (Rev 6.3.5.0.98) Jan 1 00:10:29 buildroot user.debug kernel: wl12xx: 11a is supported Jan 1 00:10:29 buildroot user.debug kernel: wl12xx: mac80211 bss info changed 0xe Jan 1 00:10:29 buildroot user.debug kernel: wl12xx: mac80211 conf tx 0 Jan 1 00:10:29 buildroot user.debug kernel: wl12xx: mac80211 conf tx 1 Jan 1 00:10:29 buildroot user.debug kernel: wl12xx: mac80211 conf tx 2 Jan 1 00:10:29 buildroot user.debug kernel: wl12xx: mac80211 conf tx 3 Jan 1 00:10:29 buildroot user.debug kernel: wl12xx: mac80211 bss info changed 0x2000 Jan 1 00:10:29 buildroot user.debug kernel: wl12xx: mac80211 bss info changed 0x4000 Jan 1 00:10:29 buildroot user.debug kernel: wl12xx: mac80211 config ch 1 psm off power 20 idle changed 0xffffffff Jan 1 00:10:29 buildroot user.debug kernel: wl12xx: flushing tx buffer: 0 0 Jan 1 00:10:29 buildroot user.debug kernel: wl12xx: mac80211 config ch 1 psm off power 20 idle changed 0x10 Jan 1 00:10:29 buildroot user.debug kernel: wl12xx: mac80211 configure filter changed 0 total 80000000 Jan 1 00:10:43 buildroot user.debug kernel: wl12xx: mac80211 hw scan Jan 1 00:10:43 buildroot user.debug kernel: wl12xx: rx skb 0xef28c500: 214 B seq 2896 hlid 0 Jan 1 00:10:43 buildroot user.debug kernel: wl12xx: rx skb 0xef28ca40: 142 B seq 871 hlid 0 Jan 1 00:10:43 buildroot user.debug kernel: wl12xx: rx skb 0xef28c980: 214 B seq 2897 hlid 0 Jan 1 00:10:43 buildroot user.debug kernel: wl12xx: rx skb 0xef28cc80: 281 B seq 2364 hlid 0 Jan 1 00:10:43 buildroot user.debug kernel: wl12xx: rx skb 0xef28cb00: 142 B seq 872 hlid 0 Jan 1 00:10:43 buildroot user.debug kernel: wl12xx: rx skb 0xee7c2e00: 148 B beacon seq 1545 hlid 0 Jan 1 00:10:44 buildroot user.debug kernel: wl12xx: EVENT on mbox 0 Jan 1 00:10:44 buildroot user.debug kernel: wl12xx: MBOX DUMP: Jan 1 00:10:44 buildroot user.debug kernel: wl12xx: vector: 0x400 Jan 1 00:10:44 buildroot user.debug kernel: wl12xx: mask: 0x3893bfe Jan 1 00:10:44 buildroot user.debug kernel: wl12xx: vector: 0x400 Jan 1 00:10:44 buildroot user.debug kernel: wl12xx: status: 0x87 Jan 1 00:10:44 buildroot user.debug kernel: wl12xx: EVENT on mbox 1 Jan 1 00:10:44 buildroot user.debug kernel: wl12xx: MBOX DUMP: Jan 1 00:10:44 buildroot user.debug kernel: wl12xx: vector: 0x400 Jan 1 00:10:44 buildroot user.debug kernel: wl12xx: mask: 0x3893bfe Jan 1 00:10:44 buildroot user.debug kernel: wl12xx: vector: 0x400 Jan 1 00:10:44 buildroot user.debug kernel: wl12xx: status: 0x9f Jan 1 00:10:44 buildroot user.debug kernel: wl12xx: mac80211 hw scan Jan 1 00:10:45 buildroot user.debug kernel: wl12xx: EVENT on mbox 0 Jan 1 00:10:45 buildroot user.debug kernel: wl12xx: MBOX DUMP: Jan 1 00:10:45 buildroot user.debug kernel: wl12xx: vector: 0x400 Jan 1 00:10:45 buildroot user.debug kernel: wl12xx: mask: 0x3893bfe Jan 1 00:10:45 buildroot user.debug kernel: wl12xx: vector: 0x400 Jan 1 00:10:45 buildroot user.debug kernel: wl12xx: status: 0x87 Jan 1 00:10:45 buildroot user.debug kernel: wlan0: authenticate with 5c:d9:98:f9:30:d9 Jan 1 00:10:45 buildroot user.debug kernel: wl12xx: mac80211 bss info changed 0x4000 Jan 1 00:10:45 buildroot user.debug kernel: wl12xx: mac80211 config ch 1 psm off power 20 in use changed 0x100 Jan 1 00:10:45 buildroot user.debug kernel: wl12xx: EVENT on mbox 1 Jan 1 00:10:45 buildroot user.debug kernel: wl12xx: MBOX DUMP: Jan 1 00:10:45 buildroot user.debug kernel: wl12xx: vector: 0x80000000 Jan 1 00:10:45 buildroot user.debug kernel: wl12xx: mask: 0x3893bfe Jan 1 00:10:45 buildroot user.debug kernel: wl12xx: vector: 0x80000000 Jan 1 00:10:45 buildroot user.debug kernel: wl12xx: mac80211 config ch 1 psm off power 20 in use changed 0x40 Jan 1 00:10:45 buildroot user.debug kernel: wl12xx: mac80211 bss info changed 0xa0 Jan 1 00:10:45 buildroot user.debug kernel: wl12xx: mac80211 sta 0 state=0->1 Jan 1 00:10:45 buildroot user.debug kernel: wlan0: send auth to 5c:d9:98:f9:30:d9 (try 1/3) Jan 1 00:10:45 buildroot user.debug kernel: wl12xx: queue skb hlid 1 q 3 len 30 Jan 1 00:10:45 buildroot user.debug kernel: wl12xx: tx_allocate: size: 46, blocks: 2, id: 0 Jan 1 00:10:45 buildroot user.debug kernel: wl12xx: tx_fill_hdr: pad: 2 hlid: 1 tx_attr: 0x824 len: 12 life: 2000 mem: 2 Jan 1 00:10:45 buildroot user.debug kernel: wl12xx: rx skb 0xee7c2a40: 30 B seq 0 hlid 1 Jan 1 00:10:45 buildroot user.debug kernel: wlan0: authenticated Jan 1 00:10:45 buildroot user.debug kernel: wl12xx: mac80211 sta 0 state=1->2 Jan 1 00:10:45 buildroot user.debug kernel: wl12xx: tx_complete received, packets: 1 Jan 1 00:10:45 buildroot user.debug kernel: wl12xx: tx status id 0 skb 0xee7c2c80 failures 0 rate 0x15 status 0x0 Jan 1 00:10:45 buildroot user.debug kernel: wl12xx: mac80211 config ch 1 psm off power 20 in use changed 0x40 Jan 1 00:10:45 buildroot user.debug kernel: wlan0: associate with 5c:d9:98:f9:30:d9 (try 1/3) Jan 1 00:10:45 buildroot user.debug kernel: wl12xx: queue skb hlid 1 q 3 len 73 Jan 1 00:10:45 buildroot user.debug kernel: wl12xx: tx_allocate: size: 89, blocks: 2, id: 0 Jan 1 00:10:45 buildroot user.debug kernel: wl12xx: tx_fill_hdr: pad: 3 hlid: 1 tx_attr: 0xc24 len: 23 life: 2000 mem: 2 Jan 1 00:10:45 buildroot user.debug kernel: wl12xx: tx_complete received, packets: 1 Jan 1 00:10:45 buildroot user.debug kernel: wl12xx: tx status id 0 skb 0xef28c680 failures 0 rate 0x15 status 0x0 Jan 1 00:10:45 buildroot user.debug kernel: wl12xx: rx skb 0xee7b99c0: 69 B seq 1 hlid 1 Jan 1 00:10:45 buildroot user.debug kernel: wlan0: RX AssocResp from 5c:d9:98:f9:30:d9 (capab=0x431 status=0 aid=1) Jan 1 00:10:45 buildroot user.debug kernel: wlan0: associated Jan 1 00:10:45 buildroot user.debug kernel: wl12xx: mac80211 sta 0 state=2->3 Jan 1 00:10:45 buildroot user.debug kernel: wl12xx: mac80211 conf tx 0 Jan 1 00:10:45 buildroot user.debug kernel: wl12xx: mac80211 conf tx 1 Jan 1 00:10:45 buildroot user.debug kernel: wl12xx: mac80211 conf tx 2 Jan 1 00:10:45 buildroot user.debug kernel: wl12xx: mac80211 conf tx 3 Jan 1 00:10:45 buildroot user.debug kernel: wl12xx: mac80211 bss info changed 0x304d Jan 1 00:10:45 buildroot user.debug kernel: wl12xx: rx skb 0xee7b9300: 131 B seq 4 hlid 1 Jan 1 00:10:45 buildroot user.debug kernel: wl12xx: rx skb 0xee7b9240: 148 B beacon seq 1568 hlid 1 Jan 1 00:10:45 buildroot user.debug kernel: cfg80211: Pending regulatory request, waiting for it to be processed... Jan 1 00:10:45 buildroot user.debug kernel: wl12xx: rx skb 0xee7b9300: 220 B beacon seq 171 hlid 1 ............................................................................. Jan 1 00:10:46 buildroot user.debug kernel: wl12xx: rx skb 0xee7b6740: 220 B beacon seq 1920 hlid 1 Jan 1 00:10:46 buildroot user.debug kernel: wl12xx: queue skb hlid 1 q 0 len 153 Jan 1 00:10:46 buildroot user.debug kernel: wl12xx: tx_allocate: size: 169, blocks: 2, id: 0 Jan 1 00:10:46 buildroot user.debug kernel: wl12xx: tx_fill_hdr: pad: 3 hlid: 1 tx_attr: 0xc24 len: 43 life: 2000 mem: 2 Jan 1 00:10:46 buildroot user.debug kernel: wl12xx: tx_complete received, packets: 1 Jan 1 00:10:46 buildroot user.debug kernel: wl12xx: tx status id 0 skb 0xee7b6740 failures 0 rate 0x15 status 0x0 Jan 1 00:10:46 buildroot user.debug kernel: wl12xx: rx skb 0xee7b6740: 217 B seq 5 hlid 1 Jan 1 00:10:46 buildroot user.debug kernel: wl12xx: rx skb 0xee7b6200: 247 B beacon seq 2387 hlid 1 ......................................................... Jan 1 00:10:46 buildroot user.debug kernel: wl12xx: rx skb 0xee7b39c0: 247 B beacon seq 2390 hlid 1 Jan 1 00:10:46 buildroot user.debug kernel: wl12xx: queue skb hlid 1 q 0 len 131 Jan 1 00:10:46 buildroot user.debug kernel: wl12xx: tx_allocate: size: 147, blocks: 2, id: 0 Jan 1 00:10:46 buildroot user.debug kernel: wl12xx: tx_fill_hdr: pad: 1 hlid: 1 tx_attr: 0x424 len: 37 life: 2000 mem: 2 Jan 1 00:10:46 buildroot user.debug kernel: wl12xx: tx_complete received, packets: 1 Jan 1 00:10:46 buildroot user.debug kernel: wl12xx: tx status id 0 skb 0xee7b39c0 failures 0 rate 0x13 status 0x0 Jan 1 00:10:46 buildroot user.debug kernel: wl12xx: mac80211 set key Jan 1 00:10:46 buildroot user.debug kernel: wl12xx: mac80211 set key Jan 1 00:10:46 buildroot user.debug kernel: wl12xx: mac80211 sta 0 state=3->4 Jan 1 00:10:46 buildroot user.debug kernel: wl12xx: mac80211 config ch 1 psm on power 20 in use changed 0x10 Jan 1 00:10:46 buildroot user.debug kernel: wl12xx: rx skb 0xee7b3480: 148 B beacon seq 1577 hlid 1 .......................................................................................................... Jan 1 00:10:51 buildroot user.debug kernel: wl12xx: rx skb 0xee7c2800: 220 B beacon seq 229 hlid 1 Jan 1 00:10:51 buildroot user.debug kernel: wl12xx: rx skb 0xee7c2680: 118 B seq 67 hlid 1 Jan 1 00:10:51 buildroot user.debug kernel: wl12xx: rx skb 0xee7c25c0: 118 B seq 69 hlid 1 Jan 1 00:10:51 buildroot user.debug kernel: wl12xx: rx skb 0xee7c2500: 118 B seq 70 hlid 1 Jan 1 00:10:51 buildroot user.debug kernel: wl12xx: rx skb 0xee7c2440: 247 B beacon seq 2442 hlid 1 .......................................................................................................... Jan 1 00:10:53 buildroot user.debug kernel: wl12xx: rx skb 0xee7b08c0: 247 B beacon seq 2464 hlid 1 Jan 1 00:10:53 buildroot user.debug kernel: wl12xx: queue skb hlid 1 q 0 len 60 Jan 1 00:10:53 buildroot user.debug kernel: wl12xx: tx_allocate: size: 80, blocks: 2, id: 0 Jan 1 00:10:53 buildroot user.debug kernel: wl12xx: tx_fill_hdr: pad: 0 hlid: 1 tx_attr: 0x24 len: 20 life: 2000 mem: 2 Jan 1 00:10:53 buildroot user.debug kernel: wl12xx: tx_complete received, packets: 1 Jan 1 00:10:53 buildroot user.debug kernel: wl12xx: tx status id 0 skb 0xee7b0680 failures 0 rate 0x10 status 0x4 Jan 1 00:10:53 buildroot user.debug kernel: wl12xx: rx skb 0xee7b0380: 148 B beacon seq 1676 hlid 1 ................................................................................... Jan 1 00:10:54 buildroot user.debug kernel: wl12xx: rx skb 0xee7b6a40: 247 B beacon seq 2474 hlid 1 Jan 1 00:10:54 buildroot user.debug kernel: wl12xx: queue skb hlid 1 q 0 len 60 Jan 1 00:10:54 buildroot user.debug kernel: wl12xx: tx_allocate: size: 80, blocks: 2, id: 0 Jan 1 00:10:54 buildroot user.debug kernel: wl12xx: tx_fill_hdr: pad: 0 hlid: 1 tx_attr: 0x24 len: 20 life: 2000 mem: 2 Jan 1 00:10:54 buildroot user.debug kernel: wl12xx: tx_complete received, packets: 1 Jan 1 00:10:54 buildroot user.debug kernel: wl12xx: tx status id 0 skb 0xee7b6b00 failures 0 rate 0x10 status 0x4 Jan 1 00:10:55 buildroot user.debug kernel: wl12xx: rx skb 0xee7b6ec0: 148 B beacon seq 1689 hlid 1 ................................................................... Jan 1 00:10:55 buildroot user.debug kernel: wl12xx: rx skb 0xee7c28c0: 247 B beacon seq 2483 hlid 1 Jan 1 00:10:55 buildroot user.debug kernel: wl12xx: rx skb 0xef28c2c0: 148 B beacon seq 1701 hlid 1 Jan 1 00:10:55 buildroot user.debug kernel: wl12xx: rx skb 0xee7c2bc0: 220 B beacon seq 271 hlid 1 Jan 1 00:10:55 buildroot user.debug kernel: wl12xx: rx skb 0xee7c2a40: 220 B beacon seq 2017 hlid 1 Jan 1 00:10:55 buildroot user.debug kernel: wl12xx: queue skb hlid 1 q 0 len 60 Jan 1 00:10:55 buildroot user.debug kernel: wl12xx: tx_allocate: size: 80, blocks: 2, id: 0 Jan 1 00:10:55 buildroot user.debug kernel: wl12xx: tx_fill_hdr: pad: 0 hlid: 1 tx_attr: 0x24 len: 20 life: 2000 mem: 2 Jan 1 00:10:55 buildroot user.debug kernel: wl12xx: tx_complete received, packets: 1 Jan 1 00:10:55 buildroot user.debug kernel: wl12xx: tx status id 0 skb 0xee7c2c80 failures 0 rate 0x10 status 0x4 Jan 1 00:10:55 buildroot user.debug kernel: wl12xx: rx skb 0xee7b9540: 247 B beacon seq 2484 hlid 1 Jan 1 00:10:56 buildroot user.debug kernel: wl12xx: rx skb 0xee7b99c0: 148 B beacon seq 1703 hlid 1 .................................................................... Jan 1 00:11:01 buildroot user.debug kernel: wl12xx: rx skb 0xee7b0a40: 148 B beacon seq 1768 hlid 1 Jan 1 00:11:01 buildroot user.debug kernel: wl12xx: rx skb 0xee7b0980: 220 B beacon seq 321 hlid 1 Jan 1 00:11:01 buildroot user.debug kernel: wl12xx: rx skb 0xee7b08c0: 118 B seq 75 hlid 1 Jan 1 00:11:01 buildroot user.debug kernel: wl12xx: rx skb 0xee7b0680: 118 B seq 76 hlid 1 Jan 1 00:11:01 buildroot user.debug kernel: wl12xx: rx skb 0xef28c140: 118 B seq 77 hlid 1 Jan 1 00:11:01 buildroot user.debug kernel: wl12xx: rx skb 0xee7b05c0: 118 B seq 78 hlid 1 Jan 1 00:11:01 buildroot user.debug kernel: wl12xx: rx skb 0xee7b0500: 247 B beacon seq 2539 hlid 1 .................................... Jan 1 00:11:23 buildroot user.debug kernel: wl12xx: rx skb 0xee7c2d40: 220 B beacon seq 540 hlid 1 Jan 1 00:11:23 buildroot user.debug kernel: wl12xx: rx skb 0xee7c2d40: 118 B seq 91 hlid 1 Jan 1 00:11:23 buildroot user.debug kernel: wl12xx: rx skb 0xee7c2d40: 148 B beacon seq 2058 hlid 1 Jan 1 00:11:23 buildroot user.debug kernel: wl12xx: rx skb 0xee7c2d40: 247 B beacon seq 2759 hlid 1 Jan 1 00:11:23 buildroot user.debug kernel: wl12xx: rx skb 0xee7c2d40: 118 B seq 93 hlid 1 Jan 1 00:11:23 buildroot user.debug kernel: wl12xx: rx skb 0xee7c2d40: 118 B seq 94 hlid 1 Do you see something strange? Yegor -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
