On 03/19/2012 10:51 PM, Matthew Garrett wrote:
I'm dealing with a platform with some buggy system firmware that enables DMA on the wireless card and leaves it running even after OS handover,
From what you showed me we are dealing with a MacBook Air using UEFI. As our meeting was brief I may have misunderstood, but am I correct to say the wireless card is active with UEFI mode to allow wireless network selection for netboot or something like that?
I also assume the proper fix should be to have the system firmware shutdown the wireless device properly before OS handover. My guess is that the device is still doing DMA transfers to some physical address space which is OK in UEFI context but the OS has assigned it for something else.
triggering memory corruption. I'm working around that by disabling bus mastering on the device in the bootloader, but that results in the system hanging during brcmsmac init. pci_set_master() is being called in the bcma code, so it's nothing that straghtforward. Any idea what might be going wrong here?
You showed me a boot menu. So after selecting Fedora the system is moving to the grub bootloader first?
Are you disabling bus master or the entire wireless device? Could you try disabling the device in the bootloader, ie. pci_disable_device() or something equivalent.
Gr. AvS -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
