Hi Ben, On Thu, Apr 5, 2012 at 11:55 PM, Ben Greear <greearb@xxxxxxxxxxxxxxx> wrote: > I see the regression on my WPEA-127N systems as well. > > With the patch applied to 3.3.1, I see never ending stream of > auth timeouts (this log is watching 'iw event' output) > > power-management is OFF on my system, and using nohwcrypt, > in case that matters. > > This is with 10 virtual stations. > > 2012-04-05 11:16:14.155 1.1: sta5 (phy #0): scan finished: 2412 2417 2422 > 2427 2432 2437 2442 2447 2452 2457 2462 2467 2472 5180 5200 5220 5240 5260 > 5280 5300 5320 5500 5520 5540 5560 5580 5600 5620 5640 5660 5680 5700 5745 > 5765 5785 5805 5825, "" > 2012-04-05 11:16:15.266 1.1: sta0 (phy #0): auth: timed out > 2012-04-05 11:16:15.266 1.1: sta1 (phy #0): auth: timed out > 2012-04-05 11:16:15.266 1.1: sta2 (phy #0): auth: timed out > 2012-04-05 11:16:15.266 1.1: sta3 (phy #0): auth: timed out > 2012-04-05 11:16:15.266 1.1: sta4 (phy #0): auth: timed out > 2012-04-05 11:16:15.266 1.1: sta6 (phy #0): auth: timed out > 2012-04-05 11:16:15.266 1.1: sta7 (phy #0): auth: timed out > 2012-04-05 11:16:15.266 1.1: sta8 (phy #0): auth: timed out > 2012-04-05 11:16:15.266 1.1: sta9 (phy #0): auth: timed out > 2012-04-05 11:16:15.266 1.1: sta5 (phy #0): auth: timed out > 2012-04-05 11:16:19.400 1.1: sta0 (phy #0): scan started > 2012-04-05 11:16:23.302 1.1: sta0 (phy #0): scan finished: 2412 2417 2422 > 2427 2432 2437 2442 2447 2452 2457 2462 2467 2472 5180 5200 5220 5240 5260 > 5280 5300 5320 5500 5520 5540 5560 5580 5600 5620 5640 5660 5680 5700 5745 > 5765 5785 5805 5825, "" > 2012-04-05 11:16:24.406 1.1: sta1 (phy #0): auth: timed out > 2012-04-05 11:16:24.406 1.1: sta2 (phy #0): auth: timed out > 2012-04-05 11:16:24.406 1.1: sta3 (phy #0): auth: timed out > 2012-04-05 11:16:24.406 1.1: sta4 (phy #0): auth: timed out > 2012-04-05 11:16:24.406 1.1: sta5 (phy #0): auth: timed out > 2012-04-05 11:16:24.406 1.1: sta6 (phy #0): auth: timed out > 2012-04-05 11:16:24.406 1.1: sta7 (phy #0): auth: timed out > 2012-04-05 11:16:24.406 1.1: sta8 (phy #0): auth: timed out > 2012-04-05 11:16:24.406 1.1: sta9 (phy #0): auth: timed out > 2012-04-05 11:16:24.406 1.1: sta0 (phy #0): auth: timed out > > I reverted the patch and then it associates immediately. > > Occasionally, I would see things associate and run OK with the patch > in place, but it always took a lot of re-tries to associate > even when it did work. i think its best for me try to download the 3.3.1 stable kernel and see if this issue happens, i am going to start it now, Ben does this happens with latest wireless testing tree? its quite weird 3.4-rc1 works as some user reported and while 3.3.1 does not. i will try to come with some suggestion patches > > I can easily test patches or try things if anyone has any ideas. > > Thanks, > Ben > > > -- > Ben Greear <greearb@xxxxxxxxxxxxxxx> > Candela Technologies Inc http://www.candelatech.com > -- thanks, shafi -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
