From: Johannes Berg <johannes.berg@xxxxxxxxx> This makes it easier to enable config items correctly. Signed-off-by: Johannes Berg <johannes.berg@xxxxxxxxx> --- --- a/config.mk +++ b/config.mk @@ -148,22 +148,22 @@ ifndef CONFIG_COMPAT_KERNEL_2_6_33 export CONFIG_COMPAT_MAC80211_DRIVER_API_TRACER=y endif #CONFIG_COMPAT_KERNEL_2_6_33 -# CONFIG_MAC80211_DEBUGFS=y -# CONFIG_MAC80211_NOINLINE=y -# CONFIG_MAC80211_VERBOSE_DEBUG=y -# CONFIG_MAC80211_HT_DEBUG=y -# CONFIG_MAC80211_TKIP_DEBUG=y -# CONFIG_MAC80211_IBSS_DEBUG=y -# CONFIG_MAC80211_VERBOSE_PS_DEBUG=y -# CONFIG_MAC80211_VERBOSE_MPL_DEBUG=y -# CONFIG_MAC80211_VERBOSE_MHWMP_DEBUG=y -# CONFIG_MAC80211_VERBOSE_TDLS_DEBUG -# CONFIG_MAC80211_DEBUG_COUNTERS=y +# export CONFIG_MAC80211_DEBUGFS=y +# export CONFIG_MAC80211_NOINLINE=y +# export CONFIG_MAC80211_VERBOSE_DEBUG=y +# export CONFIG_MAC80211_HT_DEBUG=y +# export CONFIG_MAC80211_TKIP_DEBUG=y +# export CONFIG_MAC80211_IBSS_DEBUG=y +# export CONFIG_MAC80211_VERBOSE_PS_DEBUG=y +# export CONFIG_MAC80211_VERBOSE_MPL_DEBUG=y +# export CONFIG_MAC80211_VERBOSE_MHWMP_DEBUG=y +# export CONFIG_MAC80211_VERBOSE_TDLS_DEBUG +# export CONFIG_MAC80211_DEBUG_COUNTERS=y # choose between pid and minstrel as default rate control algorithm export CONFIG_MAC80211_RC_DEFAULT=minstrel_ht export CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y -# CONFIG_MAC80211_RC_DEFAULT_PID=y +# export CONFIG_MAC80211_RC_DEFAULT_PID=y # This is the one used by our compat-wireless net/mac80211/rate.c # in case you have and old kernel which is overriding this to pid. export CONFIG_COMPAT_MAC80211_RC_DEFAULT=minstrel_ht @@ -179,18 +179,18 @@ export CONFIG_MAC80211_MESH=y export CONFIG_CFG80211=m export CONFIG_CFG80211_DEFAULT_PS=y -# CONFIG_CFG80211_DEBUGFS=y -# CONFIG_NL80211_TESTMODE=y -# CONFIG_CFG80211_DEVELOPER_WARNINGS=y -# CONFIG_CFG80211_REG_DEBUG=y -# CONFIG_CFG80211_INTERNAL_REGDB=y +# export CONFIG_CFG80211_DEBUGFS=y +# export CONFIG_NL80211_TESTMODE=y +# export CONFIG_CFG80211_DEVELOPER_WARNINGS=y +# export CONFIG_CFG80211_REG_DEBUG=y +# export CONFIG_CFG80211_INTERNAL_REGDB=y # See below for wext stuff export CONFIG_LIB80211=m export CONFIG_LIB80211_CRYPT_WEP=m export CONFIG_LIB80211_CRYPT_CCMP=m export CONFIG_LIB80211_CRYPT_TKIP=m -# CONFIG_LIB80211_DEBUG=y +# export CONFIG_LIB80211_DEBUG=y export CONFIG_BT=m export CONFIG_BT_RFCOMM=m @@ -229,7 +229,7 @@ endif #CONFIG_PCMCIA # function on struct wiphy. This struct is shipped with compat-wireless # and changes from kernel version to version. We are using the # wireless_handlers attribute which will be activated by -# CONFIG_WIRELESS_EXT. +# export CONFIG_WIRELESS_EXT. ifdef CONFIG_WIRELESS_EXT export CONFIG_CFG80211_WEXT=y else #CONFIG_CFG80211_WEXT @@ -244,16 +244,16 @@ endif #CONFIG_STAGING export CONFIG_MAC80211_HWSIM=m export CONFIG_ATH5K=m -# CONFIG_ATH5K_DEBUG=y -# CONFIG_ATH5K_TRACER=y -# CONFIG_ATH5K_AHB=y +# export CONFIG_ATH5K_DEBUG=y +# export CONFIG_ATH5K_TRACER=y +# export CONFIG_ATH5K_AHB=y export CONFIG_ATH9K=m export CONFIG_ATH9K_HW=m export CONFIG_ATH9K_COMMON=m -# CONFIG_ATH9K_DEBUGFS=y -# CONFIG_ATH9K_AHB=y -# CONFIG_ATH9K_PKTLOG=y +# export CONFIG_ATH9K_DEBUGFS=y +# export CONFIG_ATH9K_AHB=y +# export CONFIG_ATH9K_PKTLOG=y # Disable this to get minstrel as default, we leave the ath9k # rate control algorithm as the default for now as that is also @@ -273,16 +273,16 @@ export CONFIG_ATH9K_PCI=y export CONFIG_IWLWIFI=m export CONFIG_IWLWIFI_P2P=y -# CONFIG_IWLWIFI_DEBUG=y -# CONFIG_IWLWIFI_DEBUGFS=y -# CONFIG_IWLWIFI_DEVICE_TRACING=y -# CONFIG_IWLWIFI_DEBUG_EXPERIMENTAL_UCODE=y +# export CONFIG_IWLWIFI_DEBUG=y +# export CONFIG_IWLWIFI_DEBUGFS=y +# export CONFIG_IWLWIFI_DEVICE_TRACING=y +# export CONFIG_IWLWIFI_DEBUG_EXPERIMENTAL_UCODE=y export CONFIG_IWLEGACY=m export CONFIG_COMPAT_IWL4965=m export CONFIG_IWL3945=m -# CONFIG_IWLEGACY_DEBUG=y -# CONFIG_IWLEGACY_DEBUGFS=y +# export CONFIG_IWLEGACY_DEBUG=y +# export CONFIG_IWLEGACY_DEBUGFS=y export CONFIG_B43=m @@ -297,8 +297,8 @@ endif #CONFIG_MAC80211_LEDS export CONFIG_B43_PHY_LP=y export CONFIG_B43_PHY_N=y export CONFIG_B43_PHY_HT=y -# CONFIG_B43_PHY_LCN=y -# CONFIG_B43_DEBUG=y +# export CONFIG_B43_PHY_LCN=y +# export CONFIG_B43_DEBUG=y export CONFIG_B43LEGACY=m export CONFIG_B43LEGACY_HWRNG=y @@ -306,24 +306,24 @@ export CONFIG_B43LEGACY_PCI_AUTOSELECT=y ifdef CONFIG_MAC80211_LEDS export CONFIG_B43LEGACY_LEDS=y endif #CONFIG_MAC80211_LEDS -# CONFIG_B43LEGACY_DEBUG=y +# export CONFIG_B43LEGACY_DEBUG=y export CONFIG_B43LEGACY_DMA=y export CONFIG_B43LEGACY_PIO=y ifdef CONFIG_WIRELESS_EXT # The Intel ipws export CONFIG_LIBIPW=m -# CONFIG_LIBIPW_DEBUG=y +# export CONFIG_LIBIPW_DEBUG=y export CONFIG_IPW2100=m export CONFIG_IPW2100_MONITOR=y -# CONFIG_IPW2100_DEBUG=y +# export CONFIG_IPW2100_DEBUG=y export CONFIG_IPW2200=m export CONFIG_IPW2200_MONITOR=y export CONFIG_IPW2200_RADIOTAP=y export CONFIG_IPW2200_PROMISCUOUS=y export CONFIG_IPW2200_QOS=y -# CONFIG_IPW2200_DEBUG=y +# export CONFIG_IPW2200_DEBUG=y # The above enables use a second interface prefixed 'rtap'. # Example usage: # @@ -348,7 +348,7 @@ export CONFIG_SSB_B43_PCI_BRIDGE=y ifdef CONFIG_PCMCIA export CONFIG_SSB_PCMCIAHOST=y endif #CONFIG_PCMCIA -# CONFIG_SSB_DEBUG=y +# export CONFIG_SSB_DEBUG=y export CONFIG_SSB_DRIVER_PCICORE=y export CONFIG_B43_SSB=y endif #CONFIG_SSB @@ -356,7 +356,7 @@ endif #CONFIG_SSB export CONFIG_BCMA=m export CONFIG_BCMA_BLOCKIO=y export CONFIG_BCMA_HOST_PCI=y -# CONFIG_BCMA_DEBUG=y +# export CONFIG_BCMA_DEBUG=y export CONFIG_B43_BCMA=y export CONFIG_B43_BCMA_EXTRA=y @@ -448,7 +448,7 @@ export CONFIG_EEPROM_93CX6=m ifdef CONFIG_USB ifndef CONFIG_COMPAT_KERNEL_2_6_29 export CONFIG_COMPAT_ZD1211RW=m -# CONFIG_ZD1211RW_DEBUG=y +# export CONFIG_ZD1211RW_DEBUG=y endif #CONFIG_COMPAT_KERNEL_2_6_29 # Sorry, rndis_wlan uses cancel_work_sync which is new and can't be done in compat... @@ -490,7 +490,7 @@ export CONFIG_CARL9170=m ifdef CONFIG_MAC80211_LEDS export CONFIG_CARL9170_LEDS=y endif #CONFIG_MAC80211_LEDS -# CONFIG_CARL9170_DEBUGFS=y +# export CONFIG_CARL9170_DEBUGFS=y export CONFIG_CARL9170_WPC=y endif #CONFIG_COMPAT_KERNEL_2_6_29 @@ -500,7 +500,7 @@ endif #CONFIG_COMPAT_KERNEL_2_6_29 export CONFIG_COMPAT_USB_URB_THREAD_FIX=y export CONFIG_ATH9K_HTC=m -# CONFIG_ATH9K_HTC_DEBUGFS=y +# export CONFIG_ATH9K_HTC_DEBUGFS=y # RT2500USB does not require firmware export CONFIG_RT2500USB=m @@ -586,15 +586,15 @@ NEED_LIBERTAS=y endif #CONFIG_COMPAT_KERNEL_2_6_32 export CONFIG_IWM=m -# CONFIG_IWM_DEBUG=y -# CONFIG_IWM_TRACING=y +# export CONFIG_IWM_DEBUG=y +# export CONFIG_IWM_TRACING=y export CONFIG_BT_HCIBTSDIO=m export CONFIG_BT_MRVL_SDIO=m ifndef CONFIG_COMPAT_KERNEL_2_6_27 export CONFIG_ATH6KL=m -# CONFIG_ATH6KL_DEBUG=y +# export CONFIG_ATH6KL_DEBUG=y endif #CONFIG_COMPAT_KERNEL_2_6_27 ifndef CONFIG_COMPAT_KERNEL_2_6_29 @@ -614,7 +614,7 @@ export CONFIG_RT2X00_LIB=m export CONFIG_RT2800_LIB=m export CONFIG_RT2X00_LIB_FIRMWARE=y export CONFIG_RT2X00_LIB_CRYPTO=y -# CONFIG_RT2X00_LIB_SOC=y +# export CONFIG_RT2X00_LIB_SOC=y ifdef CONFIG_COMPAT_KERNEL_2_6_25 export CONFIG_RT2X00_LIB_LEDS=n else #CONFIG_COMPAT_KERNEL_2_6_25 @@ -622,8 +622,8 @@ ifdef CONFIG_LEDS_CLASS export CONFIG_RT2X00_LIB_LEDS=y endif #CONFIG_LEDS_CLASS endif #CONFIG_COMPAT_KERNEL_2_6_25 -# CONFIG_RT2X00_DEBUG=y -# CONFIG_RT2X00_LIB_DEBUGFS=y +# export CONFIG_RT2X00_DEBUG=y +# export CONFIG_RT2X00_LIB_DEBUGFS=y endif # p54 @@ -634,10 +634,10 @@ endif #CONFIG_MAC80211_LEDS # Atheros export CONFIG_ATH_COMMON=m -# CONFIG_ATH_DEBUG=y +# export CONFIG_ATH_DEBUG=y export CONFIG_BRCMUTIL=m -# CONFIG_BRCMDBG=y +# export CONFIG_BRCMDBG=y ifdef CONFIG_CRC7 export CONFIG_WL1251=m @@ -661,7 +661,7 @@ ifeq ($(NEED_LIBERTAS),y) export CONFIG_LIBERTAS_THINFIRM=m export CONFIG_LIBERTAS=m export CONFIG_LIBERTAS_MESH=y -# CONFIG_LIBERTAS_DEBUG=y +# export CONFIG_LIBERTAS_DEBUG=y endif endif #CONFIG_COMPAT_KERNEL_2_6_27 -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
