2012/3/29 Camaleón <noelamac@xxxxxxxxx>:
> El 2012-03-29 a las 13:56 +0200, Arend van Spriel escribió:
>> On 03/28/2012 11:59 PM, Camaleón wrote:
>>> 2012/3/28 Arend van Spriel<arend@xxxxxxxxxxxx>:
>>>> On 03/28/2012 01:26 PM, Camaleón wrote:
>>>
>>>>>> Did you have any opportunity to test the patch?
>
> (...)
>
>>> Here it goes.
>>>
>>> There's another trace, so now I doubt that I have applied the patches
>>> correctly... Mmm, how could check if the brcmsmac module which I have
>>> compiled and loaded has the patch applied? :-?
>>>
>>> Greetings,
>>>
>>
>> So you have 3.3 kernel sources. Is that from a tarball or are you using
>> git? For git it would be pretty easy to verify you have the patch.
>
> I have the sources, so I applied the patch ("patch -p1 < file.patch")
> and then compiled the full kernel again. I can see the three files
> (channel.c, main.c and main.h) have been modified but I'm unsure.
Just an update on this.
I compiled the latest kernel 3.4-rc1 and the trace is still there (see
attached dmesg and messages).
Were the patches applied to the mainline?
Greetings,
--
Camaleón
Apr 2 15:10:25 stt300 kernel: imklog 5.8.9, log source = /proc/kmsg started.
Apr 2 15:10:25 stt300 rsyslogd: [origin software="rsyslogd" swVersion="5.8.9" x-pid="1070" x-info="http://www.rsyslog.com";] start
Apr 2 15:10:25 stt300 kernel: [ 0.000000] Initializing cgroup subsys cpuset
Apr 2 15:10:25 stt300 kernel: [ 0.000000] Initializing cgroup subsys cpu
Apr 2 15:10:25 stt300 kernel: [ 0.000000] Linux version 3.4.0-rc1 (root@stt300) (gcc version 4.6.3 (Debian 4.6.3-1) ) #1 SMP Sun Apr 1 19:59:34 CEST 2012
Apr 2 15:10:25 stt300 kernel: [ 0.000000] Disabled fast string operations
Apr 2 15:10:25 stt300 kernel: [ 0.000000] BIOS-provided physical RAM map:
Apr 2 15:10:25 stt300 kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
Apr 2 15:10:25 stt300 kernel: [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
Apr 2 15:10:25 stt300 kernel: [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
Apr 2 15:10:25 stt300 kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 000000007f43f000 (usable)
Apr 2 15:10:25 stt300 kernel: [ 0.000000] BIOS-e820: 000000007f43f000 - 000000007f4bf000 (reserved)
Apr 2 15:10:25 stt300 kernel: [ 0.000000] BIOS-e820: 000000007f4bf000 - 000000007f5bf000 (ACPI NVS)
Apr 2 15:10:25 stt300 kernel: [ 0.000000] BIOS-e820: 000000007f5bf000 - 000000007f5f7000 (ACPI data)
Apr 2 15:10:25 stt300 kernel: [ 0.000000] BIOS-e820: 000000007f5f7000 - 000000007f600000 (usable)
Apr 2 15:10:25 stt300 kernel: [ 0.000000] BIOS-e820: 000000007f600000 - 0000000080000000 (reserved)
Apr 2 15:10:25 stt300 kernel: [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
Apr 2 15:10:25 stt300 kernel: [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
Apr 2 15:10:25 stt300 kernel: [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
Apr 2 15:10:25 stt300 kernel: [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
Apr 2 15:10:25 stt300 kernel: [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
Apr 2 15:10:25 stt300 kernel: [ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
Apr 2 15:10:25 stt300 kernel: [ 0.000000] NX (Execute Disable) protection: active
Apr 2 15:10:25 stt300 kernel: [ 0.000000] DMI 2.6 present.
Apr 2 15:10:25 stt300 kernel: [ 0.000000] last_pfn = 0x7f600 max_arch_pfn = 0x1000000
Apr 2 15:10:25 stt300 kernel: [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Apr 2 15:10:25 stt300 kernel: [ 0.000000] init_memory_mapping: 0000000000000000-00000000379fe000
Apr 2 15:10:25 stt300 kernel: [ 0.000000] RAMDISK: 37b5e000 - 37da7000
Apr 2 15:10:25 stt300 kernel: [ 0.000000] Allocated new RAMDISK: 377b5000 - 379fd6a7
Apr 2 15:10:25 stt300 kernel: [ 0.000000] Move RAMDISK from 0000000037b5e000 - 0000000037da66a6 to 377b5000 - 379fd6a6
Apr 2 15:10:25 stt300 kernel: [ 0.000000] ACPI: RSDP 000fe020 00024 (v02 HP )
Apr 2 15:10:25 stt300 kernel: [ 0.000000] ACPI: XSDT 7f5f6120 00074 (v01 HPQOEM SLIC-MPC 00000001 01000013)
Apr 2 15:10:25 stt300 kernel: [ 0.000000] ACPI: FACP 7f5f5000 000F4 (v04 HP SLIC-MPC 00000001 MSFT 01000013)
Apr 2 15:10:25 stt300 kernel: [ 0.000000] ACPI: DSDT 7f5e6000 0BA96 (v01 HP SLIC-MPC 00000001 MSFT 01000013)
Apr 2 15:10:25 stt300 kernel: [ 0.000000] ACPI: FACS 7f589000 00040
Apr 2 15:10:25 stt300 kernel: [ 0.000000] ACPI: HPET 7f5f4000 00038 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
Apr 2 15:10:25 stt300 kernel: [ 0.000000] ACPI: APIC 7f5f3000 00078 (v02 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
Apr 2 15:10:25 stt300 kernel: [ 0.000000] ACPI: MCFG 7f5f2000 0003C (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
Apr 2 15:10:25 stt300 kernel: [ 0.000000] ACPI: SLIC 7f5e5000 00176 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
Apr 2 15:10:25 stt300 kernel: [ 0.000000] ACPI: BOOT 7f5e4000 00028 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
Apr 2 15:10:25 stt300 kernel: [ 0.000000] ACPI: SSDT 7f5e3000 004C4 (v02 PmRef CpuPm 00003000 INTL 20051117)
Apr 2 15:10:25 stt300 kernel: [ 0.000000] ACPI: SSDT 7f5e2000 001F7 (v02 PmRef Cpu0Tst 00003000 INTL 20051117)
Apr 2 15:10:25 stt300 kernel: [ 0.000000] ACPI: SSDT 7f5e1000 00064 (v02 PmRef Cpu1Tst 00003000 INTL 20051117)
Apr 2 15:10:25 stt300 kernel: [ 0.000000] ACPI: WDAT 7f5e0000 00194 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
Apr 2 15:10:25 stt300 kernel: [ 0.000000] 1148MB HIGHMEM available.
Apr 2 15:10:25 stt300 kernel: [ 0.000000] 889MB LOWMEM available.
Apr 2 15:10:25 stt300 kernel: [ 0.000000] mapped low ram: 0 - 379fe000
Apr 2 15:10:25 stt300 kernel: [ 0.000000] low ram: 0 - 379fe000
Apr 2 15:10:25 stt300 kernel: [ 0.000000] Zone PFN ranges:
Apr 2 15:10:25 stt300 kernel: [ 0.000000] DMA 0x00000010 -> 0x00001000
Apr 2 15:10:25 stt300 kernel: [ 0.000000] Normal 0x00001000 -> 0x000379fe
Apr 2 15:10:25 stt300 kernel: [ 0.000000] HighMem 0x000379fe -> 0x0007f600
Apr 2 15:10:25 stt300 kernel: [ 0.000000] Movable zone start PFN for each node
Apr 2 15:10:25 stt300 kernel: [ 0.000000] Early memory PFN ranges
Apr 2 15:10:25 stt300 kernel: [ 0.000000] 0: 0x00000010 -> 0x0000009f
Apr 2 15:10:25 stt300 kernel: [ 0.000000] 0: 0x00000100 -> 0x0007f43f
Apr 2 15:10:25 stt300 kernel: [ 0.000000] 0: 0x0007f5f7 -> 0x0007f600
Apr 2 15:10:25 stt300 kernel: [ 0.000000] Using APIC driver default
Apr 2 15:10:25 stt300 kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0x408
Apr 2 15:10:25 stt300 kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Apr 2 15:10:25 stt300 kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Apr 2 15:10:25 stt300 kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
Apr 2 15:10:25 stt300 kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled)
Apr 2 15:10:25 stt300 kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
Apr 2 15:10:25 stt300 kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
Apr 2 15:10:25 stt300 kernel: [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
Apr 2 15:10:25 stt300 kernel: [ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
Apr 2 15:10:25 stt300 kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Apr 2 15:10:25 stt300 kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Apr 2 15:10:25 stt300 kernel: [ 0.000000] Using ACPI (MADT) for SMP configuration information
Apr 2 15:10:25 stt300 kernel: [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
Apr 2 15:10:25 stt300 kernel: [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
Apr 2 15:10:25 stt300 kernel: [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
Apr 2 15:10:25 stt300 kernel: [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
Apr 2 15:10:25 stt300 kernel: [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
Apr 2 15:10:25 stt300 kernel: [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:60000000)
Apr 2 15:10:25 stt300 kernel: [ 0.000000] Booting paravirtualized kernel on bare hardware
Apr 2 15:10:25 stt300 kernel: [ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1
Apr 2 15:10:25 stt300 kernel: [ 0.000000] PERCPU: Embedded 14 pages/cpu @f6400000 s32896 r0 d24448 u524288
Apr 2 15:10:25 stt300 kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 517098
Apr 2 15:10:25 stt300 kernel: [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.4.0-rc1 root=UUID=ef88aa1c-5071-41ac-8884-6c991eca9b22 ro quiet
Apr 2 15:10:25 stt300 kernel: [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
Apr 2 15:10:25 stt300 kernel: [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Apr 2 15:10:25 stt300 kernel: [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Apr 2 15:10:25 stt300 kernel: [ 0.000000] Initializing CPU#0
Apr 2 15:10:25 stt300 kernel: [ 0.000000] allocated 4173696 bytes of page_cgroup
Apr 2 15:10:25 stt300 kernel: [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
Apr 2 15:10:25 stt300 kernel: [ 0.000000] Initializing HighMem for node 0 (000379fe:0007f600)
Apr 2 15:10:25 stt300 kernel: [ 0.000000] Memory: 2055672k/2086912k available (2841k kernel code, 29028k reserved, 1351k data, 408k init, 1173800k highmem)
Apr 2 15:10:25 stt300 kernel: [ 0.000000] virtual kernel memory layout:
Apr 2 15:10:25 stt300 kernel: [ 0.000000] fixmap : 0xffd36000 - 0xfffff000 (2852 kB)
Apr 2 15:10:25 stt300 kernel: [ 0.000000] pkmap : 0xffa00000 - 0xffc00000 (2048 kB)
Apr 2 15:10:25 stt300 kernel: [ 0.000000] vmalloc : 0xf81fe000 - 0xff9fe000 ( 120 MB)
Apr 2 15:10:25 stt300 kernel: [ 0.000000] lowmem : 0xc0000000 - 0xf79fe000 ( 889 MB)
Apr 2 15:10:25 stt300 kernel: [ 0.000000] .init : 0xc1419000 - 0xc147f000 ( 408 kB)
Apr 2 15:10:25 stt300 kernel: [ 0.000000] .data : 0xc12c65b8 - 0xc1418580 (1351 kB)
Apr 2 15:10:25 stt300 kernel: [ 0.000000] .text : 0xc1000000 - 0xc12c65b8 (2841 kB)
Apr 2 15:10:25 stt300 kernel: [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
Apr 2 15:10:25 stt300 kernel: [ 0.000000] Hierarchical RCU implementation.
Apr 2 15:10:25 stt300 kernel: [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
Apr 2 15:10:25 stt300 kernel: [ 0.000000] NR_IRQS:2304 nr_irqs:712 16
Apr 2 15:10:25 stt300 kernel: [ 0.000000] Console: colour VGA+ 80x25
Apr 2 15:10:25 stt300 kernel: [ 0.000000] console [tty0] enabled
Apr 2 15:10:25 stt300 kernel: [ 0.000000] Fast TSC calibration using PIT
Apr 2 15:10:25 stt300 kernel: [ 0.000000] Detected 1662.771 MHz processor.
Apr 2 15:10:25 stt300 kernel: [ 0.004004] Calibrating delay loop (skipped), value calculated using timer frequency.. 3325.54 BogoMIPS (lpj=6651084)
Apr 2 15:10:25 stt300 kernel: [ 0.004014] pid_max: default: 32768 minimum: 301
Apr 2 15:10:25 stt300 kernel: [ 0.004105] Security Framework initialized
Apr 2 15:10:25 stt300 kernel: [ 0.004113] AppArmor: AppArmor disabled by boot time parameter
Apr 2 15:10:25 stt300 kernel: [ 0.004151] Mount-cache hash table entries: 512
Apr 2 15:10:25 stt300 kernel: [ 0.004544] Initializing cgroup subsys cpuacct
Apr 2 15:10:25 stt300 kernel: [ 0.004551] Initializing cgroup subsys memory
Apr 2 15:10:25 stt300 kernel: [ 0.004570] Initializing cgroup subsys devices
Apr 2 15:10:25 stt300 kernel: [ 0.004575] Initializing cgroup subsys freezer
Apr 2 15:10:25 stt300 kernel: [ 0.004580] Initializing cgroup subsys net_cls
Apr 2 15:10:25 stt300 kernel: [ 0.004585] Initializing cgroup subsys blkio
Apr 2 15:10:25 stt300 kernel: [ 0.004600] Initializing cgroup subsys perf_event
Apr 2 15:10:25 stt300 kernel: [ 0.004650] Disabled fast string operations
Apr 2 15:10:25 stt300 kernel: [ 0.004659] CPU: Physical Processor ID: 0
Apr 2 15:10:25 stt300 kernel: [ 0.004662] CPU: Processor Core ID: 0
Apr 2 15:10:25 stt300 kernel: [ 0.004668] mce: CPU supports 5 MCE banks
Apr 2 15:10:25 stt300 kernel: [ 0.004687] using mwait in idle threads.
Apr 2 15:10:25 stt300 kernel: [ 0.008199] ACPI: Core revision 20120320
Apr 2 15:10:25 stt300 kernel: [ 0.024110] Enabling APIC mode: Flat. Using 1 I/O APICs
Apr 2 15:10:25 stt300 kernel: [ 0.024625] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
Apr 2 15:10:25 stt300 kernel: [ 0.066626] CPU0: Intel(R) Atom(TM) CPU N455 @ 1.66GHz stepping 0a
Apr 2 15:10:25 stt300 kernel: [ 0.068003] Performance Events: PEBS fmt0+, 8-deep LBR, Atom events, Intel PMU driver.
Apr 2 15:10:25 stt300 kernel: [ 0.068003] ... version: 3
Apr 2 15:10:25 stt300 kernel: [ 0.068003] ... bit width: 40
Apr 2 15:10:25 stt300 kernel: [ 0.068003] ... generic registers: 2
Apr 2 15:10:25 stt300 kernel: [ 0.068003] ... value mask: 000000ffffffffff
Apr 2 15:10:25 stt300 kernel: [ 0.068003] ... max period: 000000007fffffff
Apr 2 15:10:25 stt300 kernel: [ 0.068003] ... fixed-purpose events: 3
Apr 2 15:10:25 stt300 kernel: [ 0.068003] ... event mask: 0000000700000003
Apr 2 15:10:25 stt300 kernel: [ 0.068003] NMI watchdog: enabled, takes one hw-pmu counter.
Apr 2 15:10:25 stt300 kernel: [ 0.068003] Booting Node 0, Processors #1
Apr 2 15:10:25 stt300 kernel: [ 0.008000] Initializing CPU#1
Apr 2 15:10:25 stt300 kernel: [ 0.008000] Disabled fast string operations
Apr 2 15:10:25 stt300 kernel: [ 0.078094] NMI watchdog: enabled, takes one hw-pmu counter.
Apr 2 15:10:25 stt300 kernel: [ 0.078171] Brought up 2 CPUs
Apr 2 15:10:25 stt300 kernel: [ 0.078179] Total of 2 processors activated (6651.08 BogoMIPS).
Apr 2 15:10:25 stt300 kernel: [ 0.078775] devtmpfs: initialized
Apr 2 15:10:25 stt300 kernel: [ 0.078775] PM: Registering ACPI NVS region [mem 0x7f4bf000-0x7f5befff] (1048576 bytes)
Apr 2 15:10:25 stt300 kernel: [ 0.078775] dummy:
Apr 2 15:10:25 stt300 kernel: [ 0.078775] NET: Registered protocol family 16
Apr 2 15:10:25 stt300 kernel: [ 0.080253] ACPI: bus type pci registered
Apr 2 15:10:25 stt300 kernel: [ 0.080407] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
Apr 2 15:10:25 stt300 kernel: [ 0.080415] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
Apr 2 15:10:25 stt300 kernel: [ 0.080420] PCI: Using MMCONFIG for extended config space
Apr 2 15:10:25 stt300 kernel: [ 0.080424] PCI: Using configuration type 1 for base access
Apr 2 15:10:25 stt300 kernel: [ 0.081794] bio: create slab <bio-0> at 0
Apr 2 15:10:25 stt300 kernel: [ 0.081794] ACPI: Added _OSI(Module Device)
Apr 2 15:10:25 stt300 kernel: [ 0.081794] ACPI: Added _OSI(Processor Device)
Apr 2 15:10:25 stt300 kernel: [ 0.081794] ACPI: Added _OSI(3.0 _SCP Extensions)
Apr 2 15:10:25 stt300 kernel: [ 0.081794] ACPI: Added _OSI(Processor Aggregator Device)
Apr 2 15:10:25 stt300 kernel: [ 0.086582] ACPI: Executed 1 blocks of module-level executable AML code
Apr 2 15:10:25 stt300 kernel: [ 0.090874] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
Apr 2 15:10:25 stt300 kernel: [ 0.091858] ACPI: SSDT 7f494c98 001F7 (v02 PmRef Cpu0Ist 00003000 INTL 20051117)
Apr 2 15:10:25 stt300 kernel: [ 0.092646] ACPI: Dynamic OEM Table Load:
Apr 2 15:10:25 stt300 kernel: [ 0.092654] ACPI: SSDT (null) 001F7 (v02 PmRef Cpu0Ist 00003000 INTL 20051117)
Apr 2 15:10:25 stt300 kernel: [ 0.092961] ACPI: SSDT 7f493e18 001C7 (v02 PmRef Cpu0Cst 00003001 INTL 20051117)
Apr 2 15:10:25 stt300 kernel: [ 0.093689] ACPI: Dynamic OEM Table Load:
Apr 2 15:10:25 stt300 kernel: [ 0.093696] ACPI: SSDT (null) 001C7 (v02 PmRef Cpu0Cst 00003001 INTL 20051117)
Apr 2 15:10:25 stt300 kernel: [ 0.093738] ACPI: SSDT 7f494f18 000D0 (v02 PmRef Cpu1Ist 00003000 INTL 20051117)
Apr 2 15:10:25 stt300 kernel: [ 0.093738] ACPI: Dynamic OEM Table Load:
Apr 2 15:10:25 stt300 kernel: [ 0.093738] ACPI: SSDT (null) 000D0 (v02 PmRef Cpu1Ist 00003000 INTL 20051117)
Apr 2 15:10:25 stt300 kernel: [ 0.093738] ACPI: SSDT 7f492f18 00083 (v02 PmRef Cpu1Cst 00003000 INTL 20051117)
Apr 2 15:10:25 stt300 kernel: [ 0.096221] ACPI: Dynamic OEM Table Load:
Apr 2 15:10:25 stt300 kernel: [ 0.096229] ACPI: SSDT (null) 00083 (v02 PmRef Cpu1Cst 00003000 INTL 20051117)
Apr 2 15:10:25 stt300 kernel: [ 0.404445] ACPI: Interpreter enabled
Apr 2 15:10:25 stt300 kernel: [ 0.404462] ACPI: (supports S0 S3 S4 S5)
Apr 2 15:10:25 stt300 kernel: [ 0.404527] ACPI: Using IOAPIC for interrupt routing
Apr 2 15:10:25 stt300 kernel: [ 0.417591] ACPI: Power Resource [FN00] (on)
Apr 2 15:10:25 stt300 kernel: [ 0.418345] ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
Apr 2 15:10:25 stt300 kernel: [ 0.418695] ACPI: No dock devices found.
Apr 2 15:10:25 stt300 kernel: [ 0.418707] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
Apr 2 15:10:25 stt300 kernel: [ 0.419673] ACPI Warning: For \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20120320/nspredef-359)
Apr 2 15:10:25 stt300 kernel: [ 0.419707] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
Apr 2 15:10:25 stt300 kernel: [ 0.421276] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
Apr 2 15:10:25 stt300 kernel: [ 0.421284] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
Apr 2 15:10:25 stt300 kernel: [ 0.421290] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
Apr 2 15:10:25 stt300 kernel: [ 0.421298] pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xfebfffff]
Apr 2 15:10:25 stt300 kernel: [ 0.421391] PCI host bridge to bus 0000:00
Apr 2 15:10:25 stt300 kernel: [ 0.421397] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
Apr 2 15:10:25 stt300 kernel: [ 0.421404] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
Apr 2 15:10:25 stt300 kernel: [ 0.421410] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
Apr 2 15:10:25 stt300 kernel: [ 0.421417] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff]
Apr 2 15:10:25 stt300 kernel: [ 0.429833] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
Apr 2 15:10:25 stt300 kernel: [ 0.440062] pci 0000:00:1c.1: PCI bridge to [bus 02-02]
Apr 2 15:10:25 stt300 kernel: [ 0.440200] pci 0000:00:1e.0: PCI bridge to [bus 03-03] (subtractive decode)
Apr 2 15:10:25 stt300 kernel: [ 0.441279] ACPI Warning: For \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20120320/nspredef-359)
Apr 2 15:10:25 stt300 kernel: [ 0.441313] pci0000:00: Requesting ACPI _OSC control (0x1d)
Apr 2 15:10:25 stt300 kernel: [ 0.441456] ACPI Warning: For \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20120320/nspredef-359)
Apr 2 15:10:25 stt300 kernel: [ 0.441488] pci0000:00: ACPI _OSC request failed (AE_TYPE), returned control mask: 0x1d
Apr 2 15:10:25 stt300 kernel: [ 0.441493] ACPI _OSC control for PCIe not granted, disabling ASPM
Apr 2 15:10:25 stt300 kernel: [ 0.447920] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
Apr 2 15:10:25 stt300 kernel: [ 0.448093] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12)
Apr 2 15:10:25 stt300 kernel: [ 0.448243] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
Apr 2 15:10:25 stt300 kernel: [ 0.448392] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
Apr 2 15:10:25 stt300 kernel: [ 0.448541] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
Apr 2 15:10:25 stt300 kernel: [ 0.448693] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
Apr 2 15:10:25 stt300 kernel: [ 0.448844] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
Apr 2 15:10:25 stt300 kernel: [ 0.448995] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
Apr 2 15:10:25 stt300 kernel: [ 0.449192] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
Apr 2 15:10:25 stt300 kernel: [ 0.449192] vgaarb: loaded
Apr 2 15:10:25 stt300 kernel: [ 0.449192] vgaarb: bridge control possible 0000:00:02.0
Apr 2 15:10:25 stt300 kernel: [ 0.449192] PCI: Using ACPI for IRQ routing
Apr 2 15:10:25 stt300 kernel: [ 0.458721] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
Apr 2 15:10:25 stt300 kernel: [ 0.458733] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
Apr 2 15:10:25 stt300 kernel: [ 0.458744] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Apr 2 15:10:25 stt300 kernel: [ 0.464068] Switching to clocksource hpet
Apr 2 15:10:25 stt300 kernel: [ 0.467810] pnp: PnP ACPI init
Apr 2 15:10:25 stt300 kernel: [ 0.467848] ACPI: bus type pnp registered
Apr 2 15:10:25 stt300 kernel: [ 0.470492] system 00:01: [io 0x0600-0x060f] has been reserved
Apr 2 15:10:25 stt300 kernel: [ 0.470500] system 00:01: [io 0x0610] has been reserved
Apr 2 15:10:25 stt300 kernel: [ 0.470507] system 00:01: [io 0x0800-0x080f] has been reserved
Apr 2 15:10:25 stt300 kernel: [ 0.470514] system 00:01: [io 0x0810-0x0817] has been reserved
Apr 2 15:10:25 stt300 kernel: [ 0.470521] system 00:01: [io 0x0400-0x047f] has been reserved
Apr 2 15:10:25 stt300 kernel: [ 0.470528] system 00:01: [io 0x0500-0x053f] has been reserved
Apr 2 15:10:25 stt300 kernel: [ 0.470536] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
Apr 2 15:10:25 stt300 kernel: [ 0.470544] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
Apr 2 15:10:25 stt300 kernel: [ 0.470551] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
Apr 2 15:10:25 stt300 kernel: [ 0.470559] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
Apr 2 15:10:25 stt300 kernel: [ 0.470566] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
Apr 2 15:10:25 stt300 kernel: [ 0.470574] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
Apr 2 15:10:25 stt300 kernel: [ 0.470581] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
Apr 2 15:10:25 stt300 kernel: [ 0.471759] pnp: PnP ACPI: found 9 devices
Apr 2 15:10:25 stt300 kernel: [ 0.471763] ACPI: ACPI bus type pnp unregistered
Apr 2 15:10:25 stt300 kernel: [ 0.471770] PnPBIOS: Disabled by ACPI PNP
Apr 2 15:10:25 stt300 kernel: [ 0.477891] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
Apr 2 15:10:25 stt300 kernel: [ 0.477905] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
Apr 2 15:10:25 stt300 kernel: [ 0.477917] pci 0000:00:1c.0: bridge window [mem 0x93000000-0x93ffffff]
Apr 2 15:10:25 stt300 kernel: [ 0.477927] pci 0000:00:1c.0: bridge window [mem 0x90000000-0x90ffffff 64bit pref]
Apr 2 15:10:25 stt300 kernel: [ 0.477940] pci 0000:00:1c.1: PCI bridge to [bus 02-02]
Apr 2 15:10:25 stt300 kernel: [ 0.477948] pci 0000:00:1c.1: bridge window [io 0x1000-0x1fff]
Apr 2 15:10:25 stt300 kernel: [ 0.477958] pci 0000:00:1c.1: bridge window [mem 0x92000000-0x92ffffff]
Apr 2 15:10:25 stt300 kernel: [ 0.477968] pci 0000:00:1c.1: bridge window [mem 0x91000000-0x91ffffff 64bit pref]
Apr 2 15:10:25 stt300 kernel: [ 0.477980] pci 0000:00:1e.0: PCI bridge to [bus 03-03]
Apr 2 15:10:25 stt300 kernel: [ 0.478313] NET: Registered protocol family 2
Apr 2 15:10:25 stt300 kernel: [ 0.478433] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
Apr 2 15:10:25 stt300 kernel: [ 0.478899] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
Apr 2 15:10:25 stt300 kernel: [ 0.479850] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
Apr 2 15:10:25 stt300 kernel: [ 0.480335] TCP: Hash tables configured (established 131072 bind 65536)
Apr 2 15:10:25 stt300 kernel: [ 0.480342] TCP: reno registered
Apr 2 15:10:25 stt300 kernel: [ 0.480356] UDP hash table entries: 512 (order: 2, 16384 bytes)
Apr 2 15:10:25 stt300 kernel: [ 0.480375] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
Apr 2 15:10:25 stt300 kernel: [ 0.480623] NET: Registered protocol family 1
Apr 2 15:10:25 stt300 kernel: [ 0.496274] Unpacking initramfs...
Apr 2 15:10:25 stt300 kernel: [ 0.607845] Freeing initrd memory: 2340k freed
Apr 2 15:10:25 stt300 kernel: [ 0.609629] Simple Boot Flag at 0x44 set to 0x1
Apr 2 15:10:25 stt300 kernel: [ 0.610585] audit: initializing netlink socket (disabled)
Apr 2 15:10:25 stt300 kernel: [ 0.610610] type=2000 audit(1333372209.604:1): initialized
Apr 2 15:10:25 stt300 kernel: [ 0.640434] highmem bounce pool size: 64 pages
Apr 2 15:10:25 stt300 kernel: [ 0.640446] HugeTLB registered 2 MB page size, pre-allocated 0 pages
Apr 2 15:10:25 stt300 kernel: [ 0.641369] VFS: Disk quotas dquot_6.5.2
Apr 2 15:10:25 stt300 kernel: [ 0.641429] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Apr 2 15:10:25 stt300 kernel: [ 0.641582] msgmni has been set to 1726
Apr 2 15:10:25 stt300 kernel: [ 0.641941] alg: No test for stdrng (krng)
Apr 2 15:10:25 stt300 kernel: [ 0.642021] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
Apr 2 15:10:25 stt300 kernel: [ 0.642030] io scheduler noop registered
Apr 2 15:10:25 stt300 kernel: [ 0.642035] io scheduler deadline registered
Apr 2 15:10:25 stt300 kernel: [ 0.642075] io scheduler cfq registered (default)
Apr 2 15:10:25 stt300 kernel: [ 0.642688] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Apr 2 15:10:25 stt300 kernel: [ 0.642750] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
Apr 2 15:10:25 stt300 kernel: [ 0.642755] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
Apr 2 15:10:25 stt300 kernel: [ 0.643461] Marking TSC unstable due to TSC halts in idle states deeper than C2
Apr 2 15:10:25 stt300 kernel: [ 0.643542] GHES: HEST is not enabled!
Apr 2 15:10:25 stt300 kernel: [ 0.643572] isapnp: Scanning for PnP cards...
Apr 2 15:10:25 stt300 kernel: [ 0.997367] isapnp: No Plug & Play device found
Apr 2 15:10:25 stt300 kernel: [ 0.997544] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
Apr 2 15:10:25 stt300 kernel: [ 0.998637] Linux agpgart interface v0.103
Apr 2 15:10:25 stt300 kernel: [ 0.998849] agpgart-intel 0000:00:00.0: Intel GMA3150 Chipset
Apr 2 15:10:25 stt300 kernel: [ 0.999059] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
Apr 2 15:10:25 stt300 kernel: [ 0.999323] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
Apr 2 15:10:25 stt300 kernel: [ 0.999582] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x80000000
Apr 2 15:10:25 stt300 kernel: [ 0.999907] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12
Apr 2 15:10:25 stt300 kernel: [ 1.005144] serio: i8042 KBD port at 0x60,0x64 irq 1
Apr 2 15:10:25 stt300 kernel: [ 1.005160] serio: i8042 AUX port at 0x60,0x64 irq 12
Apr 2 15:10:25 stt300 kernel: [ 1.005506] mousedev: PS/2 mouse device common for all mice
Apr 2 15:10:25 stt300 kernel: [ 1.005609] rtc_cmos 00:03: RTC can wake from S4
Apr 2 15:10:25 stt300 kernel: [ 1.005820] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
Apr 2 15:10:25 stt300 kernel: [ 1.005862] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
Apr 2 15:10:25 stt300 kernel: [ 1.005993] cpuidle: using governor ladder
Apr 2 15:10:25 stt300 kernel: [ 1.006140] cpuidle: using governor menu
Apr 2 15:10:25 stt300 kernel: [ 1.006379] TCP: cubic registered
Apr 2 15:10:25 stt300 kernel: [ 1.006497] NET: Registered protocol family 10
Apr 2 15:10:25 stt300 kernel: [ 1.006950] Mobile IPv6
Apr 2 15:10:25 stt300 kernel: [ 1.006958] NET: Registered protocol family 17
Apr 2 15:10:25 stt300 kernel: [ 1.006968] Registering the dns_resolver key type
Apr 2 15:10:25 stt300 kernel: [ 1.007045] Using IPI No-Shortcut mode
Apr 2 15:10:25 stt300 kernel: [ 1.007383] registered taskstats version 1
Apr 2 15:10:25 stt300 kernel: [ 1.008425] rtc_cmos 00:03: setting system clock to 2012-04-02 13:10:10 UTC (1333372210)
Apr 2 15:10:25 stt300 kernel: [ 1.008565] Initializing network drop monitor service
Apr 2 15:10:25 stt300 kernel: [ 1.008779] Freeing unused kernel memory: 408k freed
Apr 2 15:10:25 stt300 kernel: [ 1.009106] Write protecting the kernel text: 2844k
Apr 2 15:10:25 stt300 kernel: [ 1.009186] Write protecting the kernel read-only data: 1068k
Apr 2 15:10:25 stt300 kernel: [ 1.009192] NX-protecting the kernel data: 3300k
Apr 2 15:10:25 stt300 kernel: [ 1.132436] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
Apr 2 15:10:25 stt300 kernel: [ 1.174324] ACPI Warning: For \_TZ_.THRM._AL0: Return Package has no elements (empty) (20120320/nspredef-463)
Apr 2 15:10:25 stt300 kernel: [ 1.174432] ACPI: Invalid active0 threshold
Apr 2 15:10:25 stt300 kernel: [ 1.179926] thermal LNXTHERM:00: registered as thermal_zone0
Apr 2 15:10:25 stt300 kernel: [ 1.179936] ACPI: Thermal Zone [THRM] (32 C)
Apr 2 15:10:25 stt300 kernel: [ 1.223311] SCSI subsystem initialized
Apr 2 15:10:25 stt300 kernel: [ 1.235106] ahci: SSS flag set, parallel bus scan disabled
Apr 2 15:10:25 stt300 kernel: [ 1.235168] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
Apr 2 15:10:25 stt300 kernel: [ 1.235181] ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pmp pio slum part
Apr 2 15:10:25 stt300 kernel: [ 1.241128] scsi0 : ahci
Apr 2 15:10:25 stt300 kernel: [ 1.244865] scsi1 : ahci
Apr 2 15:10:25 stt300 kernel: [ 1.248487] scsi2 : ahci
Apr 2 15:10:25 stt300 kernel: [ 1.250354] scsi3 : ahci
Apr 2 15:10:25 stt300 kernel: [ 1.253407] ata1: SATA max UDMA/133 abar m1024@0x94204000 port 0x94204100 irq 42
Apr 2 15:10:25 stt300 kernel: [ 1.253420] ata2: SATA max UDMA/133 abar m1024@0x94204000 port 0x94204180 irq 42
Apr 2 15:10:25 stt300 kernel: [ 1.253429] ata3: DUMMY
Apr 2 15:10:25 stt300 kernel: [ 1.253434] ata4: DUMMY
Apr 2 15:10:25 stt300 kernel: [ 1.743506] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Apr 2 15:10:25 stt300 kernel: [ 1.744389] ata1.00: unexpected _GTF length (4)
Apr 2 15:10:25 stt300 kernel: [ 1.798752] ata1.00: ATA-8: ST9250315AS, 0001SDM1, max UDMA/133
Apr 2 15:10:25 stt300 kernel: [ 1.798764] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
Apr 2 15:10:25 stt300 kernel: [ 1.800581] ata1.00: unexpected _GTF length (4)
Apr 2 15:10:25 stt300 kernel: [ 1.800941] ata1.00: configured for UDMA/133
Apr 2 15:10:25 stt300 kernel: [ 1.801220] scsi 0:0:0:0: Direct-Access ATA ST9250315AS 0001 PQ: 0 ANSI: 5
Apr 2 15:10:25 stt300 kernel: [ 2.123509] ata2: SATA link down (SStatus 0 SControl 300)
Apr 2 15:10:25 stt300 kernel: [ 2.134483] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
Apr 2 15:10:25 stt300 kernel: [ 2.134714] sd 0:0:0:0: [sda] Write Protect is off
Apr 2 15:10:25 stt300 kernel: [ 2.134821] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Apr 2 15:10:25 stt300 kernel: [ 2.253133] sda: sda1 sda2
Apr 2 15:10:25 stt300 kernel: [ 2.254059] sd 0:0:0:0: [sda] Attached SCSI disk
Apr 2 15:10:25 stt300 kernel: [ 2.658093] PM: Starting manual resume from disk
Apr 2 15:10:25 stt300 kernel: [ 2.666923] REISERFS (device sda2): found reiserfs format "3.6" with standard journal
Apr 2 15:10:25 stt300 kernel: [ 2.666950] REISERFS (device sda2): using ordered data mode
Apr 2 15:10:25 stt300 kernel: [ 2.666955] reiserfs: using flush barriers
Apr 2 15:10:25 stt300 kernel: [ 2.678612] REISERFS (device sda2): journal params: device sda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
Apr 2 15:10:25 stt300 kernel: [ 2.679181] REISERFS (device sda2): checking transaction log (sda2)
Apr 2 15:10:25 stt300 kernel: [ 2.793638] REISERFS (device sda2): Using r5 hash to sort names
Apr 2 15:10:25 stt300 kernel: [ 6.358470] ACPI: Requesting acpi_cpufreq
Apr 2 15:10:25 stt300 kernel: [ 6.380254] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
Apr 2 15:10:25 stt300 kernel: [ 6.380274] ACPI: Power Button [PWRB]
Apr 2 15:10:25 stt300 kernel: [ 6.383689] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
Apr 2 15:10:25 stt300 kernel: [ 6.391669] ACPI: Lid Switch [LID0]
Apr 2 15:10:25 stt300 kernel: [ 6.391981] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
Apr 2 15:10:25 stt300 kernel: [ 6.391999] ACPI: Power Button [PWRF]
Apr 2 15:10:25 stt300 kernel: [ 6.438646] ACPI: AC Adapter [AC] (on-line)
Apr 2 15:10:25 stt300 kernel: [ 6.519678] usbcore: registered new interface driver usbfs
Apr 2 15:10:25 stt300 kernel: [ 6.519760] usbcore: registered new interface driver hub
Apr 2 15:10:25 stt300 kernel: [ 6.525173] usbcore: registered new device driver usb
Apr 2 15:10:25 stt300 kernel: [ 6.538587] bcma: Found chip with id 0x4313, rev 0x01 and package 0x08
Apr 2 15:10:25 stt300 kernel: [ 6.538633] bcma: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x24, class 0x0)
Apr 2 15:10:25 stt300 kernel: [ 6.538669] bcma: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x18, class 0x0)
Apr 2 15:10:25 stt300 kernel: [ 6.538732] bcma: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x11, class 0x0)
Apr 2 15:10:25 stt300 kernel: [ 6.541345] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Apr 2 15:10:25 stt300 kernel: [ 6.541454] ehci_hcd 0000:00:1d.7: EHCI Host Controller
Apr 2 15:10:25 stt300 kernel: [ 6.541556] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
Apr 2 15:10:25 stt300 kernel: [ 6.541614] ehci_hcd 0000:00:1d.7: using broken periodic workaround
Apr 2 15:10:25 stt300 kernel: [ 6.541639] ehci_hcd 0000:00:1d.7: debug port 1
Apr 2 15:10:25 stt300 kernel: [ 6.545674] ehci_hcd 0000:00:1d.7: irq 16, io mem 0x94204400
Apr 2 15:10:25 stt300 kernel: [ 6.547712] ACPI: Battery Slot [BAT0] (battery present)
Apr 2 15:10:25 stt300 kernel: [ 6.548321] wmi: Mapper loaded
Apr 2 15:10:25 stt300 kernel: [ 6.552183] rts_pstor: module is from the staging directory, the quality is unknown, you have been warned.
Apr 2 15:10:25 stt300 kernel: [ 6.554455] Initializing Realtek PCIE storage driver...
Apr 2 15:10:25 stt300 kernel: [ 6.557669] Resource length: 0x10000
Apr 2 15:10:25 stt300 kernel: [ 6.557743] Original address: 0x93000000, remapped address: 0xf85a0000
Apr 2 15:10:25 stt300 kernel: [ 6.557758] pci->irq = 17
Apr 2 15:10:25 stt300 kernel: [ 6.557766] rtsx_acquire_irq: chip->msi_en = 0, pci->irq = 17
Apr 2 15:10:25 stt300 kernel: [ 6.560779] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
Apr 2 15:10:25 stt300 kernel: [ 6.560852] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
Apr 2 15:10:25 stt300 kernel: [ 6.560862] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Apr 2 15:10:25 stt300 kernel: [ 6.560871] usb usb1: Product: EHCI Host Controller
Apr 2 15:10:25 stt300 kernel: [ 6.560878] usb usb1: Manufacturer: Linux 3.4.0-rc1 ehci_hcd
Apr 2 15:10:25 stt300 kernel: [ 6.560885] usb usb1: SerialNumber: 0000:00:1d.7
Apr 2 15:10:25 stt300 kernel: [ 6.561274] hub 1-0:1.0: USB hub found
Apr 2 15:10:25 stt300 kernel: [ 6.561292] hub 1-0:1.0: 8 ports detected
Apr 2 15:10:25 stt300 kernel: [ 6.570138] iTCO_vendor_support: vendor-support=0
Apr 2 15:10:25 stt300 kernel: [ 6.570637] bcma: Bus registered
Apr 2 15:10:25 stt300 kernel: [ 6.573774] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
Apr 2 15:10:25 stt300 kernel: [ 6.574045] iTCO_wdt: Found a NM10 TCO device (Version=2, TCOBASE=0x0460)
Apr 2 15:10:25 stt300 kernel: [ 6.574205] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
Apr 2 15:10:25 stt300 kernel: [ 6.697827] uhci_hcd: USB Universal Host Controller Interface driver
Apr 2 15:10:25 stt300 kernel: [ 6.697955] uhci_hcd 0000:00:1d.0: UHCI Host Controller
Apr 2 15:10:25 stt300 kernel: [ 6.697990] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
Apr 2 15:10:25 stt300 kernel: [ 6.698048] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00003080
Apr 2 15:10:25 stt300 kernel: [ 6.698177] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
Apr 2 15:10:25 stt300 kernel: [ 6.698187] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Apr 2 15:10:25 stt300 kernel: [ 6.698195] usb usb2: Product: UHCI Host Controller
Apr 2 15:10:25 stt300 kernel: [ 6.698202] usb usb2: Manufacturer: Linux 3.4.0-rc1 uhci_hcd
Apr 2 15:10:25 stt300 kernel: [ 6.698209] usb usb2: SerialNumber: 0000:00:1d.0
Apr 2 15:10:25 stt300 kernel: [ 6.699744] hub 2-0:1.0: USB hub found
Apr 2 15:10:25 stt300 kernel: [ 6.699760] hub 2-0:1.0: 2 ports detected
Apr 2 15:10:25 stt300 kernel: [ 6.699987] uhci_hcd 0000:00:1d.1: UHCI Host Controller
Apr 2 15:10:25 stt300 kernel: [ 6.700008] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
Apr 2 15:10:25 stt300 kernel: [ 6.700080] uhci_hcd 0000:00:1d.1: irq 18, io base 0x00003060
Apr 2 15:10:25 stt300 kernel: [ 6.700161] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
Apr 2 15:10:25 stt300 kernel: [ 6.700168] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Apr 2 15:10:25 stt300 kernel: [ 6.700174] usb usb3: Product: UHCI Host Controller
Apr 2 15:10:25 stt300 kernel: [ 6.700179] usb usb3: Manufacturer: Linux 3.4.0-rc1 uhci_hcd
Apr 2 15:10:25 stt300 kernel: [ 6.700184] usb usb3: SerialNumber: 0000:00:1d.1
Apr 2 15:10:25 stt300 kernel: [ 6.700687] hub 3-0:1.0: USB hub found
Apr 2 15:10:25 stt300 kernel: [ 6.700706] hub 3-0:1.0: 2 ports detected
Apr 2 15:10:25 stt300 kernel: [ 6.700941] uhci_hcd 0000:00:1d.2: UHCI Host Controller
Apr 2 15:10:25 stt300 kernel: [ 6.700962] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
Apr 2 15:10:25 stt300 kernel: [ 6.701004] uhci_hcd 0000:00:1d.2: irq 17, io base 0x00003040
Apr 2 15:10:25 stt300 kernel: [ 6.701086] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
Apr 2 15:10:25 stt300 kernel: [ 6.701093] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Apr 2 15:10:25 stt300 kernel: [ 6.701098] usb usb4: Product: UHCI Host Controller
Apr 2 15:10:25 stt300 kernel: [ 6.701103] usb usb4: Manufacturer: Linux 3.4.0-rc1 uhci_hcd
Apr 2 15:10:25 stt300 kernel: [ 6.701109] usb usb4: SerialNumber: 0000:00:1d.2
Apr 2 15:10:25 stt300 kernel: [ 6.701431] hub 4-0:1.0: USB hub found
Apr 2 15:10:25 stt300 kernel: [ 6.701448] hub 4-0:1.0: 2 ports detected
Apr 2 15:10:25 stt300 kernel: [ 6.701679] uhci_hcd 0000:00:1d.3: UHCI Host Controller
Apr 2 15:10:25 stt300 kernel: [ 6.701699] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
Apr 2 15:10:25 stt300 kernel: [ 6.701769] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00003020
Apr 2 15:10:25 stt300 kernel: [ 6.701852] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
Apr 2 15:10:25 stt300 kernel: [ 6.701859] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Apr 2 15:10:25 stt300 kernel: [ 6.701865] usb usb5: Product: UHCI Host Controller
Apr 2 15:10:25 stt300 kernel: [ 6.701870] usb usb5: Manufacturer: Linux 3.4.0-rc1 uhci_hcd
Apr 2 15:10:25 stt300 kernel: [ 6.701875] usb usb5: SerialNumber: 0000:00:1d.3
Apr 2 15:10:25 stt300 kernel: [ 6.702186] hub 5-0:1.0: USB hub found
Apr 2 15:10:25 stt300 kernel: [ 6.702202] hub 5-0:1.0: 2 ports detected
Apr 2 15:10:25 stt300 kernel: [ 6.716868] input: PC Speaker as /devices/platform/pcspkr/input/input4
Apr 2 15:10:25 stt300 kernel: [ 6.755834] scsi4 : SCSI emulation for PCI-Express Mass Storage devices
Apr 2 15:10:25 stt300 kernel: [ 6.756088] rts_pstor: waiting for device to settle before scanning
Apr 2 15:10:25 stt300 kernel: [ 6.756719] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
Apr 2 15:10:25 stt300 kernel: [ 6.756851] r8169 0000:01:00.0: (unregistered net_device): unknown MAC, using family default
Apr 2 15:10:25 stt300 kernel: [ 6.757689] r8169 0000:01:00.0: eth0: RTL8101e at 0xf8332000, 68:b5:99:d3:c1:d8, XID 04000000 IRQ 43
Apr 2 15:10:25 stt300 kernel: [ 6.776895] [drm] Initialized drm 1.1.0 20060810
Apr 2 15:10:25 stt300 kernel: [ 6.796716] i915 0000:00:02.0: power state changed by ACPI to D0
Apr 2 15:10:25 stt300 kernel: [ 6.796728] i915 0000:00:02.0: power state changed by ACPI to D0
Apr 2 15:10:25 stt300 kernel: [ 6.845176] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
Apr 2 15:10:25 stt300 kernel: [ 6.845181] [drm] Driver supports precise vblank timestamp query.
Apr 2 15:10:25 stt300 kernel: [ 6.845254] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
Apr 2 15:10:25 stt300 kernel: [ 6.871831] usb 1-8: new high-speed USB device number 2 using ehci_hcd
Apr 2 15:10:25 stt300 kernel: [ 6.904046] input: HP WMI hotkeys as /devices/virtual/input/input5
Apr 2 15:10:25 stt300 kernel: [ 6.926875] cfg80211: Calling CRDA to update world regulatory domain
Apr 2 15:10:25 stt300 kernel: [ 7.078025] usb 1-8: New USB device found, idVendor=174f, idProduct=1122
Apr 2 15:10:25 stt300 kernel: [ 7.078035] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Apr 2 15:10:25 stt300 kernel: [ 7.078043] usb 1-8: Product: HP Webcam
Apr 2 15:10:25 stt300 kernel: [ 7.078049] usb 1-8: Manufacturer: D-MAX
Apr 2 15:10:25 stt300 kernel: [ 7.078054] usb 1-8: SerialNumber: 00
Apr 2 15:10:25 stt300 kernel: [ 7.144704] brcmsmac bcma0:0: mfg 4bf core 812 rev 24 class 0 irq 17
Apr 2 15:10:25 stt300 kernel: [ 7.282890] [drm] initialized overlay support
Apr 2 15:10:25 stt300 kernel: [ 7.308966] fbcon: inteldrmfb (fb0) is primary device
Apr 2 15:10:25 stt300 kernel: [ 7.601585] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.4, id: 0x1e0b1, caps: 0xd04773/0xa40000/0xa0400
Apr 2 15:10:25 stt300 kernel: [ 7.647083] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
Apr 2 15:10:25 stt300 kernel: [ 7.739627] Console: switching to colour frame buffer device 128x37
Apr 2 15:10:25 stt300 kernel: [ 7.752376] fb0: inteldrmfb frame buffer device
Apr 2 15:10:25 stt300 kernel: [ 7.752383] drm: registered panic notifier
Apr 2 15:10:25 stt300 kernel: [ 7.754385] rts_pstor: device scan complete
Apr 2 15:10:25 stt300 kernel: [ 7.754603] scsi 4:0:0:0: Direct-Access Generic- xD/SD/M.S. 1.00 PQ: 0 ANSI: 0 CCS
Apr 2 15:10:25 stt300 kernel: [ 7.758057] sd 4:0:0:0: [sdb] Attached SCSI removable disk
Apr 2 15:10:25 stt300 kernel: [ 7.761884] acpi device:21: registered as cooling_device2
Apr 2 15:10:25 stt300 kernel: [ 7.762513] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input7
Apr 2 15:10:25 stt300 kernel: [ 7.762694] ACPI: Video Device [OVGA] (multi-head: yes rom: no post: no)
Apr 2 15:10:25 stt300 kernel: [ 7.762842] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
Apr 2 15:10:25 stt300 kernel: [ 7.862407] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8
Apr 2 15:10:25 stt300 kernel: [ 7.873638] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
Apr 2 15:10:25 stt300 kernel: [ 7.873943] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
Apr 2 15:10:25 stt300 kernel: [ 7.974247] Linux media interface: v0.10
Apr 2 15:10:25 stt300 kernel: [ 8.024908] Linux video capture interface: v2.00
Apr 2 15:10:25 stt300 kernel: [ 8.224418] uvcvideo: Found UVC 1.00 device HP Webcam (174f:1122)
Apr 2 15:10:25 stt300 kernel: [ 8.237912] input: HP Webcam as /devices/pci0000:00/0000:00:1d.7/usb1/1-8/1-8:1.0/input/input11
Apr 2 15:10:25 stt300 kernel: [ 8.238173] usbcore: registered new interface driver uvcvideo
Apr 2 15:10:25 stt300 kernel: [ 8.238180] USB Video Class driver (1.1.1)
Apr 2 15:10:25 stt300 kernel: [ 8.728511] cfg80211: World regulatory domain updated:
Apr 2 15:10:25 stt300 kernel: [ 8.728519] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Apr 2 15:10:25 stt300 kernel: [ 8.728527] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Apr 2 15:10:25 stt300 kernel: [ 8.728533] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Apr 2 15:10:25 stt300 kernel: [ 8.728540] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Apr 2 15:10:25 stt300 kernel: [ 8.728546] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Apr 2 15:10:25 stt300 kernel: [ 8.728552] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Apr 2 15:10:25 stt300 kernel: [ 8.728578] cfg80211: Calling CRDA for country: US
Apr 2 15:10:25 stt300 kernel: [ 8.741297] cfg80211: Regulatory domain changed to country: US
Apr 2 15:10:25 stt300 kernel: [ 8.741304] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Apr 2 15:10:25 stt300 kernel: [ 8.741312] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
Apr 2 15:10:25 stt300 kernel: [ 8.741319] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
Apr 2 15:10:25 stt300 kernel: [ 8.741325] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Apr 2 15:10:25 stt300 kernel: [ 8.741331] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Apr 2 15:10:25 stt300 kernel: [ 8.741338] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Apr 2 15:10:25 stt300 kernel: [ 8.741344] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
Apr 2 15:10:25 stt300 kernel: [ 8.741369] cfg80211: Calling CRDA for country: ES
Apr 2 15:10:25 stt300 kernel: [ 8.754268] cfg80211: Regulatory domain changed to country: ES
Apr 2 15:10:25 stt300 kernel: [ 8.754276] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Apr 2 15:10:25 stt300 kernel: [ 8.754284] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Apr 2 15:10:25 stt300 kernel: [ 8.754290] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Apr 2 15:10:25 stt300 kernel: [ 8.754296] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Apr 2 15:10:25 stt300 kernel: [ 8.754302] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
Apr 2 15:10:25 stt300 kernel: [ 10.510372] Adding 3905532k swap on /dev/sda1. Priority:-1 extents:1 across:3905532k
Apr 2 15:10:25 stt300 kernel: [ 10.720228] reiserfs: enabling write barrier flush mode
Apr 2 15:10:25 stt300 kernel: [ 11.034230] loop: module loaded
Apr 2 15:10:25 stt300 kernel: [ 14.627810] fuse init (API version 7.18)
Apr 2 15:10:29 stt300 kernel: [ 19.790888] r8169 0000:01:00.0: eth0: link down
Apr 2 15:10:29 stt300 kernel: [ 19.791287] ADDRCONF(NETDEV_UP): eth0: link is not ready
Apr 2 15:10:29 stt300 kernel: [ 19.852443] ADDRCONF(NETDEV_UP): wlan0: link is not ready
Apr 2 15:10:31 stt300 kernel: [ 22.464458] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input12
Apr 2 15:10:35 stt300 kernel: [ 25.631961] lp: driver loaded but no devices found
Apr 2 15:10:35 stt300 kernel: [ 25.917333] ppdev: user-space parallel port driver
Apr 2 15:11:20 stt300 kernel: [ 70.882642] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Apr 2 15:12:42 stt300 kernel: [ 153.121722] cfg80211: Calling CRDA to update world regulatory domain
Apr 2 15:12:42 stt300 kernel: [ 153.140884] cfg80211: World regulatory domain updated:
Apr 2 15:12:42 stt300 kernel: [ 153.140892] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Apr 2 15:12:42 stt300 kernel: [ 153.140899] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Apr 2 15:12:42 stt300 kernel: [ 153.140906] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Apr 2 15:12:42 stt300 kernel: [ 153.140912] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Apr 2 15:12:42 stt300 kernel: [ 153.140918] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Apr 2 15:12:42 stt300 kernel: [ 153.140925] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Apr 2 15:12:42 stt300 kernel: [ 153.140953] cfg80211: Calling CRDA for country: ES
Apr 2 15:12:42 stt300 kernel: [ 153.154239] cfg80211: Regulatory domain changed to country: ES
Apr 2 15:12:42 stt300 kernel: [ 153.154246] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Apr 2 15:12:42 stt300 kernel: [ 153.154254] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Apr 2 15:12:42 stt300 kernel: [ 153.154260] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Apr 2 15:12:42 stt300 kernel: [ 153.154266] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Apr 2 15:12:42 stt300 kernel: [ 153.154272] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
Apr 2 15:12:42 stt300 kernel: [ 153.281590] ------------[ cut here ]------------
Apr 2 15:12:42 stt300 kernel: [ 153.281653] WARNING: at drivers/net/wireless/brcm80211/brcmsmac/main.c:7983 brcms_c_wait_for_tx_completion+0x73/0x7d [brcmsmac]()
Apr 2 15:12:42 stt300 kernel: [ 153.281664] Hardware name: Compaq Mini CQ10-500
Apr 2 15:12:42 stt300 kernel: [ 153.281672] Modules linked in: cpufreq_powersave cpufreq_stats cpufreq_userspace cpufreq_conservative parport_pc ppdev lp parport binfmt_misc uinput fuse loop uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_core videodev media joydev snd_hda_codec_idt arc4 snd_hda_intel snd_hda_codec snd_hwdep snd_pcm snd_page_alloc brcmsmac cordic crc8 brcmutil snd_seq snd_seq_device snd_timer snd soundcore mac80211 cfg80211 hp_wmi i915 drm_kms_helper drm psmouse sparse_keymap rfkill pcspkr evdev serio_raw uhci_hcd r8169 i2c_i801 i2c_algo_bit iTCO_wdt iTCO_vendor_support rts_pstor(C) mii ehci_hcd wmi bcma i2c_core usbcore battery acpi_cpufreq mperf ac usb_common video power_supply button processor reiserfs sd_mod crc_t10dif ahci libahci libata scsi_mod thermal thermal_sys
Apr 2 15:12:42 stt300 kernel: [ 153.281868] Pid: 140, comm: kworker/u:3 Tainted: G C 3.4.0-rc1 #1
Apr 2 15:12:42 stt300 kernel: [ 153.281876] Call Trace:
Apr 2 15:12:42 stt300 kernel: [ 153.281898] [<c102ca02>] ? warn_slowpath_common+0x68/0x79
Apr 2 15:12:42 stt300 kernel: [ 153.281938] [<f86a7c6d>] ? brcms_c_wait_for_tx_completion+0x73/0x7d [brcmsmac]
Apr 2 15:12:42 stt300 kernel: [ 153.281953] [<c102ca20>] ? warn_slowpath_null+0xd/0x10
Apr 2 15:12:42 stt300 kernel: [ 153.281991] [<f86a7c6d>] ? brcms_c_wait_for_tx_completion+0x73/0x7d [brcmsmac]
Apr 2 15:12:42 stt300 kernel: [ 153.282024] [<f869f0ea>] ? brcms_ops_flush+0x1f/0x29 [brcmsmac]
Apr 2 15:12:42 stt300 kernel: [ 153.282072] [<f880b9cb>] ? __ieee80211_recalc_idle+0x1b2/0x1dd [mac80211]
Apr 2 15:12:42 stt300 kernel: [ 153.282087] [<c104c42d>] ? try_to_wake_up+0x153/0x15d
Apr 2 15:12:42 stt300 kernel: [ 153.282100] [<c1046ec0>] ? should_resched+0x5/0x1e
Apr 2 15:12:42 stt300 kernel: [ 153.282146] [<f880c53c>] ? ieee80211_recalc_idle+0x19/0x36 [mac80211]
Apr 2 15:12:42 stt300 kernel: [ 153.282204] [<f8825c09>] ? ieee80211_sta_connection_lost.isra.15+0x6a/0x94 [mac80211]
Apr 2 15:12:42 stt300 kernel: [ 153.282266] [<f8827b4d>] ? ieee80211_sta_work+0x7d9/0x869 [mac80211]
Apr 2 15:12:42 stt300 kernel: [ 153.282279] [<c1049f04>] ? finish_task_switch+0x4c/0x7f
Apr 2 15:12:42 stt300 kernel: [ 153.282293] [<c12c049b>] ? __schedule+0x435/0x445
Apr 2 15:12:42 stt300 kernel: [ 153.282305] [<c106474d>] ? arch_local_irq_save+0xf/0x14
Apr 2 15:12:42 stt300 kernel: [ 153.282351] [<f880ae49>] ? ieee80211_iface_work+0x227/0x27b [mac80211]
Apr 2 15:12:42 stt300 kernel: [ 153.282367] [<c103e3e7>] ? process_one_work+0x112/0x1fa
Apr 2 15:12:42 stt300 kernel: [ 153.282412] [<f880ac22>] ? ieee80211_teardown_sdata+0xbb/0xbb [mac80211]
Apr 2 15:12:42 stt300 kernel: [ 153.282424] [<c103ec50>] ? worker_thread+0xa9/0x122
Apr 2 15:12:42 stt300 kernel: [ 153.282436] [<c103eba7>] ? manage_workers.isra.23+0x13d/0x13d
Apr 2 15:12:42 stt300 kernel: [ 153.282449] [<c1041668>] ? kthread+0x68/0x6d
Apr 2 15:12:42 stt300 kernel: [ 153.282462] [<c1041600>] ? kthread_freezable_should_stop+0x37/0x37
Apr 2 15:12:42 stt300 kernel: [ 153.282475] [<c12c5afe>] ? kernel_thread_helper+0x6/0x10
Apr 2 15:12:42 stt300 kernel: [ 153.282483] ---[ end trace 9220a61ec50d085a ]---
Apr 2 15:14:13 stt300 kernel: [ 244.320552] cfg80211: Calling CRDA to update world regulatory domain
Apr 2 15:14:13 stt300 kernel: [ 244.338128] cfg80211: World regulatory domain updated:
Apr 2 15:14:13 stt300 kernel: [ 244.338136] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Apr 2 15:14:13 stt300 kernel: [ 244.338144] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Apr 2 15:14:13 stt300 kernel: [ 244.338151] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Apr 2 15:14:13 stt300 kernel: [ 244.338157] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Apr 2 15:14:13 stt300 kernel: [ 244.338163] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Apr 2 15:14:13 stt300 kernel: [ 244.338170] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Apr 2 15:14:13 stt300 kernel: [ 244.338196] cfg80211: Calling CRDA for country: ES
Apr 2 15:14:13 stt300 kernel: [ 244.351238] cfg80211: Regulatory domain changed to country: ES
Apr 2 15:14:13 stt300 kernel: [ 244.351246] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Apr 2 15:14:13 stt300 kernel: [ 244.351253] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Apr 2 15:14:13 stt300 kernel: [ 244.351259] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Apr 2 15:14:13 stt300 kernel: [ 244.351265] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Apr 2 15:14:13 stt300 kernel: [ 244.351271] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
Apr 2 15:15:47 stt300 rsyslogd: [origin software="rsyslogd" swVersion="5.8.9" x-pid="1070" x-info="http://www.rsyslog.com";] rsyslogd was HUPed
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.4.0-rc1 (root@stt300) (gcc version 4.6.3 (Debian 4.6.3-1) ) #1 SMP Sun Apr 1 19:59:34 CEST 2012
[ 0.000000] Disabled fast string operations
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007f43f000 (usable)
[ 0.000000] BIOS-e820: 000000007f43f000 - 000000007f4bf000 (reserved)
[ 0.000000] BIOS-e820: 000000007f4bf000 - 000000007f5bf000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007f5bf000 - 000000007f5f7000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007f5f7000 - 000000007f600000 (usable)
[ 0.000000] BIOS-e820: 000000007f600000 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.6 present.
[ 0.000000] DMI: Hewlett-Packard Compaq Mini CQ10-500 /148A, BIOS F.15 01/14/2011
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x7f600 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0FFE00000 mask 0FFE00000 write-protect
[ 0.000000] 1 base 000000000 mask 0C0000000 write-back
[ 0.000000] 2 base 040000000 mask 0C0000000 write-back
[ 0.000000] 3 base 07F800000 mask 0FF800000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] initial memory mapped : 0 - 01a00000
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: 0000000000000000-00000000379fe000
[ 0.000000] 0000000000 - 0000200000 page 4k
[ 0.000000] 0000200000 - 0037800000 page 2M
[ 0.000000] 0037800000 - 00379fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 379fe000 @ 19fa000-1a00000
[ 0.000000] RAMDISK: 37b5e000 - 37da7000
[ 0.000000] Allocated new RAMDISK: 377b5000 - 379fd6a7
[ 0.000000] Move RAMDISK from 0000000037b5e000 - 0000000037da66a6 to 377b5000 - 379fd6a6
[ 0.000000] ACPI: RSDP 000fe020 00024 (v02 HP )
[ 0.000000] ACPI: XSDT 7f5f6120 00074 (v01 HPQOEM SLIC-MPC 00000001 01000013)
[ 0.000000] ACPI: FACP 7f5f5000 000F4 (v04 HP SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: DSDT 7f5e6000 0BA96 (v01 HP SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: FACS 7f589000 00040
[ 0.000000] ACPI: HPET 7f5f4000 00038 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: APIC 7f5f3000 00078 (v02 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: MCFG 7f5f2000 0003C (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: SLIC 7f5e5000 00176 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: BOOT 7f5e4000 00028 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: SSDT 7f5e3000 004C4 (v02 PmRef CpuPm 00003000 INTL 20051117)
[ 0.000000] ACPI: SSDT 7f5e2000 001F7 (v02 PmRef Cpu0Tst 00003000 INTL 20051117)
[ 0.000000] ACPI: SSDT 7f5e1000 00064 (v02 PmRef Cpu1Tst 00003000 INTL 20051117)
[ 0.000000] ACPI: WDAT 7f5e0000 00194 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1148MB HIGHMEM available.
[ 0.000000] 889MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 379fe000
[ 0.000000] low ram: 0 - 379fe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000379fe
[ 0.000000] HighMem 0x000379fe -> 0x0007f600
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] Early memory PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0007f43f
[ 0.000000] 0: 0x0007f5f7 -> 0x0007f600
[ 0.000000] On node 0 totalpages: 521175
[ 0.000000] free_area_init_node: node 0, pgdat c1410a40, node_mem_map f67c4200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1748 pages used for memmap
[ 0.000000] Normal zone: 221994 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2297 pages used for memmap
[ 0.000000] HighMem zone: 291153 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:60000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @f6400000 s32896 r0 d24448 u524288
[ 0.000000] pcpu-alloc: s32896 r0 d24448 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 517098
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.4.0-rc1 root=UUID=ef88aa1c-5071-41ac-8884-6c991eca9b22 ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 4173696 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000379fe:0007f600)
[ 0.000000] Memory: 2055672k/2086912k available (2841k kernel code, 29028k reserved, 1351k data, 408k init, 1173800k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xffd36000 - 0xfffff000 (2852 kB)
[ 0.000000] pkmap : 0xffa00000 - 0xffc00000 (2048 kB)
[ 0.000000] vmalloc : 0xf81fe000 - 0xff9fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf79fe000 ( 889 MB)
[ 0.000000] .init : 0xc1419000 - 0xc147f000 ( 408 kB)
[ 0.000000] .data : 0xc12c65b8 - 0xc1418580 (1351 kB)
[ 0.000000] .text : 0xc1000000 - 0xc12c65b8 (2841 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:2304 nr_irqs:712 16
[ 0.000000] CPU 0 irqstacks, hard=f5c06000 soft=f5c08000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1662.771 MHz processor.
[ 0.004004] Calibrating delay loop (skipped), value calculated using timer frequency.. 3325.54 BogoMIPS (lpj=6651084)
[ 0.004014] pid_max: default: 32768 minimum: 301
[ 0.004105] Security Framework initialized
[ 0.004113] AppArmor: AppArmor disabled by boot time parameter
[ 0.004151] Mount-cache hash table entries: 512
[ 0.004544] Initializing cgroup subsys cpuacct
[ 0.004551] Initializing cgroup subsys memory
[ 0.004570] Initializing cgroup subsys devices
[ 0.004575] Initializing cgroup subsys freezer
[ 0.004580] Initializing cgroup subsys net_cls
[ 0.004585] Initializing cgroup subsys blkio
[ 0.004600] Initializing cgroup subsys perf_event
[ 0.004650] Disabled fast string operations
[ 0.004659] CPU: Physical Processor ID: 0
[ 0.004662] CPU: Processor Core ID: 0
[ 0.004668] mce: CPU supports 5 MCE banks
[ 0.004680] CPU0: Thermal monitoring handled by SMI
[ 0.004687] using mwait in idle threads.
[ 0.008199] ACPI: Core revision 20120320
[ 0.024110] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.024625] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.066626] CPU0: Intel(R) Atom(TM) CPU N455 @ 1.66GHz stepping 0a
[ 0.068003] Performance Events: PEBS fmt0+, 8-deep LBR, Atom events, Intel PMU driver.
[ 0.068003] ... version: 3
[ 0.068003] ... bit width: 40
[ 0.068003] ... generic registers: 2
[ 0.068003] ... value mask: 000000ffffffffff
[ 0.068003] ... max period: 000000007fffffff
[ 0.068003] ... fixed-purpose events: 3
[ 0.068003] ... event mask: 0000000700000003
[ 0.068003] NMI watchdog: enabled, takes one hw-pmu counter.
[ 0.068003] CPU 1 irqstacks, hard=f5cf2000 soft=f5cf4000
[ 0.068003] Booting Node 0, Processors #1
[ 0.008000] Initializing CPU#1
[ 0.008000] Disabled fast string operations
[ 0.008000] CPU1: Thermal monitoring handled by SMI
[ 0.078094] NMI watchdog: enabled, takes one hw-pmu counter.
[ 0.078171] Brought up 2 CPUs
[ 0.078179] Total of 2 processors activated (6651.08 BogoMIPS).
[ 0.078775] devtmpfs: initialized
[ 0.078775] PM: Registering ACPI NVS region [mem 0x7f4bf000-0x7f5befff] (1048576 bytes)
[ 0.078775] dummy:
[ 0.078775] NET: Registered protocol family 16
[ 0.080253] ACPI: bus type pci registered
[ 0.080407] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.080415] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.080420] PCI: Using MMCONFIG for extended config space
[ 0.080424] PCI: Using configuration type 1 for base access
[ 0.081794] bio: create slab <bio-0> at 0
[ 0.081794] ACPI: Added _OSI(Module Device)
[ 0.081794] ACPI: Added _OSI(Processor Device)
[ 0.081794] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.081794] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.084055] ACPI: EC: Look up EC in DSDT
[ 0.086582] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.090874] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.091858] ACPI: SSDT 7f494c98 001F7 (v02 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.092646] ACPI: Dynamic OEM Table Load:
[ 0.092654] ACPI: SSDT (null) 001F7 (v02 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.092961] ACPI: SSDT 7f493e18 001C7 (v02 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.093689] ACPI: Dynamic OEM Table Load:
[ 0.093696] ACPI: SSDT (null) 001C7 (v02 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.093738] ACPI: SSDT 7f494f18 000D0 (v02 PmRef Cpu1Ist 00003000 INTL 20051117)
[ 0.093738] ACPI: Dynamic OEM Table Load:
[ 0.093738] ACPI: SSDT (null) 000D0 (v02 PmRef Cpu1Ist 00003000 INTL 20051117)
[ 0.093738] ACPI: SSDT 7f492f18 00083 (v02 PmRef Cpu1Cst 00003000 INTL 20051117)
[ 0.096221] ACPI: Dynamic OEM Table Load:
[ 0.096229] ACPI: SSDT (null) 00083 (v02 PmRef Cpu1Cst 00003000 INTL 20051117)
[ 0.404445] ACPI: Interpreter enabled
[ 0.404462] ACPI: (supports S0 S3 S4 S5)
[ 0.404527] ACPI: Using IOAPIC for interrupt routing
[ 0.417591] ACPI: Power Resource [FN00] (on)
[ 0.418345] ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
[ 0.418695] ACPI: No dock devices found.
[ 0.418707] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.419673] ACPI Warning: For \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20120320/nspredef-359)
[ 0.419692] \_SB_.PCI0:_OSC evaluation returned wrong type
[ 0.419696] _OSC request data:1 8 1f
[ 0.419707] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.421276] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.421284] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.421290] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.421298] pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xfebfffff]
[ 0.421391] PCI host bridge to bus 0000:00
[ 0.421397] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.421404] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.421410] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.421417] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff]
[ 0.421441] pci 0000:00:00.0: [8086:a010] type 00 class 0x060000
[ 0.421505] pci 0000:00:02.0: [8086:a011] type 00 class 0x030000
[ 0.421521] pci 0000:00:02.0: reg 10: [mem 0x94180000-0x941fffff]
[ 0.421532] pci 0000:00:02.0: reg 14: [io 0x30c0-0x30c7]
[ 0.421543] pci 0000:00:02.0: reg 18: [mem 0x80000000-0x8fffffff pref]
[ 0.421553] pci 0000:00:02.0: reg 1c: [mem 0x94000000-0x940fffff]
[ 0.421608] pci 0000:00:02.1: [8086:a012] type 00 class 0x038000
[ 0.421622] pci 0000:00:02.1: reg 10: [mem 0x94100000-0x9417ffff]
[ 0.421747] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
[ 0.421776] pci 0000:00:1b.0: reg 10: [mem 0x94200000-0x94203fff 64bit]
[ 0.421887] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.421933] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
[ 0.422050] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.422097] pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400
[ 0.422209] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.422258] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
[ 0.422321] pci 0000:00:1d.0: reg 20: [io 0x3080-0x309f]
[ 0.422376] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
[ 0.422437] pci 0000:00:1d.1: reg 20: [io 0x3060-0x307f]
[ 0.422495] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
[ 0.422557] pci 0000:00:1d.2: reg 20: [io 0x3040-0x305f]
[ 0.422611] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
[ 0.422673] pci 0000:00:1d.3: reg 20: [io 0x3020-0x303f]
[ 0.422744] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
[ 0.423433] pci 0000:00:1d.7: reg 10: [mem 0x94204400-0x942047ff]
[ 0.427339] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.427379] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 0.427489] pci 0000:00:1f.0: [8086:27bc] type 00 class 0x060100
[ 0.427670] pci 0000:00:1f.2: [8086:27c1] type 00 class 0x010601
[ 0.427699] pci 0000:00:1f.2: reg 10: [io 0x30b8-0x30bf]
[ 0.427715] pci 0000:00:1f.2: reg 14: [io 0x30cc-0x30cf]
[ 0.427731] pci 0000:00:1f.2: reg 18: [io 0x30b0-0x30b7]
[ 0.427747] pci 0000:00:1f.2: reg 1c: [io 0x30c8-0x30cb]
[ 0.427763] pci 0000:00:1f.2: reg 20: [io 0x30a0-0x30af]
[ 0.427780] pci 0000:00:1f.2: reg 24: [mem 0x94204000-0x942043ff]
[ 0.427842] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.427875] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
[ 0.428049] pci 0000:00:1f.3: reg 20: [io 0x3000-0x301f]
[ 0.428242] pci 0000:01:00.0: [10ec:8136] type 00 class 0x020000
[ 0.428312] pci 0000:01:00.0: reg 10: [io 0x2000-0x20ff]
[ 0.428430] pci 0000:01:00.0: reg 18: [mem 0x90004000-0x90004fff 64bit pref]
[ 0.428505] pci 0000:01:00.0: reg 20: [mem 0x90000000-0x90003fff 64bit pref]
[ 0.428808] pci 0000:01:00.0: supports D1 D2
[ 0.428814] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.429011] pci 0000:01:00.1: [10ec:5288] type 00 class 0xff0000
[ 0.429080] pci 0000:01:00.1: reg 10: [mem 0x93000000-0x9300ffff]
[ 0.429595] pci 0000:01:00.1: supports D1 D2
[ 0.429600] pci 0000:01:00.1: PME# supported from D1 D2 D3hot D3cold
[ 0.429833] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[ 0.429843] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.429852] pci 0000:00:1c.0: bridge window [mem 0x93000000-0x93ffffff]
[ 0.429865] pci 0000:00:1c.0: bridge window [mem 0x90000000-0x90ffffff 64bit pref]
[ 0.429981] pci 0000:02:00.0: [14e4:4727] type 00 class 0x028000
[ 0.430031] pci 0000:02:00.0: reg 10: [mem 0x92000000-0x92003fff 64bit]
[ 0.430270] pci 0000:02:00.0: supports D1 D2
[ 0.440062] pci 0000:00:1c.1: PCI bridge to [bus 02-02]
[ 0.440072] pci 0000:00:1c.1: bridge window [io 0x1000-0x1fff]
[ 0.440082] pci 0000:00:1c.1: bridge window [mem 0x92000000-0x92ffffff]
[ 0.440095] pci 0000:00:1c.1: bridge window [mem 0x91000000-0x91ffffff 64bit pref]
[ 0.440200] pci 0000:00:1e.0: PCI bridge to [bus 03-03] (subtractive decode)
[ 0.440219] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.440226] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.440233] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.440240] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xfebfffff] (subtractive decode)
[ 0.440266] pci_bus 0000:00: on NUMA node 0
[ 0.440275] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.440598] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
[ 0.440801] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
[ 0.440947] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
[ 0.441279] ACPI Warning: For \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20120320/nspredef-359)
[ 0.441298] \_SB_.PCI0:_OSC evaluation returned wrong type
[ 0.441302] _OSC request data:1 1f 1f
[ 0.441313] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.441456] ACPI Warning: For \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20120320/nspredef-359)
[ 0.441473] \_SB_.PCI0:_OSC evaluation returned wrong type
[ 0.441477] _OSC request data:1 0 1d
[ 0.441488] pci0000:00: ACPI _OSC request failed (AE_TYPE), returned control mask: 0x1d
[ 0.441493] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.447920] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.448093] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12)
[ 0.448243] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.448392] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.448541] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[ 0.448693] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[ 0.448844] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[ 0.448995] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[ 0.449192] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.449192] vgaarb: loaded
[ 0.449192] vgaarb: bridge control possible 0000:00:02.0
[ 0.449192] PCI: Using ACPI for IRQ routing
[ 0.458262] PCI: pci_cache_line_size set to 64 bytes
[ 0.458406] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[ 0.458413] reserve RAM buffer: 000000007f43f000 - 000000007fffffff
[ 0.458421] reserve RAM buffer: 000000007f600000 - 000000007fffffff
[ 0.458721] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.458733] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.458744] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.464068] Switching to clocksource hpet
[ 0.467810] pnp: PnP ACPI init
[ 0.467848] ACPI: bus type pnp registered
[ 0.469668] pnp 00:00: [bus 00-ff]
[ 0.469676] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.469683] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.469688] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.469694] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.469704] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 0.469710] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 0.469716] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 0.469722] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 0.469728] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 0.469734] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 0.469740] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 0.469746] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 0.469752] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 0.469758] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 0.469764] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 0.469771] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 0.469777] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 0.469783] pnp 00:00: [mem 0x80000000-0xfebfffff window]
[ 0.469908] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.470224] pnp 00:01: [io 0x002e-0x002f]
[ 0.470231] pnp 00:01: [io 0x004e-0x004f]
[ 0.470236] pnp 00:01: [io 0x0061]
[ 0.470241] pnp 00:01: [io 0x0070]
[ 0.470246] pnp 00:01: [io 0x0080]
[ 0.470251] pnp 00:01: [io 0x0092]
[ 0.470256] pnp 00:01: [io 0x00b2-0x00b3]
[ 0.470261] pnp 00:01: [io 0x0063]
[ 0.470266] pnp 00:01: [io 0x0065]
[ 0.470271] pnp 00:01: [io 0x0067]
[ 0.470276] pnp 00:01: [io 0x0600-0x060f]
[ 0.470281] pnp 00:01: [io 0x0610]
[ 0.470287] pnp 00:01: [io 0x0800-0x080f]
[ 0.470292] pnp 00:01: [io 0x0810-0x0817]
[ 0.470297] pnp 00:01: [io 0x0400-0x047f]
[ 0.470303] pnp 00:01: [io 0x0500-0x053f]
[ 0.470308] pnp 00:01: [mem 0xe0000000-0xefffffff]
[ 0.470314] pnp 00:01: [mem 0xfed1c000-0xfed1ffff]
[ 0.470320] pnp 00:01: [mem 0xfed14000-0xfed17fff]
[ 0.470325] pnp 00:01: [mem 0xfed18000-0xfed18fff]
[ 0.470331] pnp 00:01: [mem 0xfed19000-0xfed19fff]
[ 0.470337] pnp 00:01: [mem 0xfec00000-0xfec00fff]
[ 0.470343] pnp 00:01: [mem 0xfee00000-0xfee00fff]
[ 0.470492] system 00:01: [io 0x0600-0x060f] has been reserved
[ 0.470500] system 00:01: [io 0x0610] has been reserved
[ 0.470507] system 00:01: [io 0x0800-0x080f] has been reserved
[ 0.470514] system 00:01: [io 0x0810-0x0817] has been reserved
[ 0.470521] system 00:01: [io 0x0400-0x047f] has been reserved
[ 0.470528] system 00:01: [io 0x0500-0x053f] has been reserved
[ 0.470536] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.470544] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.470551] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
[ 0.470559] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.470566] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.470574] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.470581] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.470590] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.470619] pnp 00:02: [io 0x0000-0x001f]
[ 0.470625] pnp 00:02: [io 0x0081-0x0091]
[ 0.470630] pnp 00:02: [io 0x0093-0x009f]
[ 0.470635] pnp 00:02: [io 0x00c0-0x00df]
[ 0.470641] pnp 00:02: [dma 4]
[ 0.470707] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.470770] pnp 00:03: [io 0x0070-0x0077]
[ 0.470837] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.471004] pnp 00:04: [irq 0 disabled]
[ 0.471024] pnp 00:04: [irq 8]
[ 0.471034] pnp 00:04: [mem 0xfed00000-0xfed003ff]
[ 0.471106] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.471138] pnp 00:05: [io 0x00f0]
[ 0.471150] pnp 00:05: [irq 13]
[ 0.471219] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.471250] pnp 00:06: [mem 0xff800000-0xffffffff]
[ 0.471317] pnp 00:06: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.471371] pnp 00:07: [io 0x0060]
[ 0.471377] pnp 00:07: [io 0x0064]
[ 0.471388] pnp 00:07: [irq 1]
[ 0.471461] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.471511] pnp 00:08: [irq 12]
[ 0.471585] pnp 00:08: Plug and Play ACPI device, IDs SYN1e33 SYN1e00 SYN0002 PNP0f13 (active)
[ 0.471759] pnp: PnP ACPI: found 9 devices
[ 0.471763] ACPI: ACPI bus type pnp unregistered
[ 0.471770] PnPBIOS: Disabled by ACPI PNP
[ 0.477891] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[ 0.477905] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.477917] pci 0000:00:1c.0: bridge window [mem 0x93000000-0x93ffffff]
[ 0.477927] pci 0000:00:1c.0: bridge window [mem 0x90000000-0x90ffffff 64bit pref]
[ 0.477940] pci 0000:00:1c.1: PCI bridge to [bus 02-02]
[ 0.477948] pci 0000:00:1c.1: bridge window [io 0x1000-0x1fff]
[ 0.477958] pci 0000:00:1c.1: bridge window [mem 0x92000000-0x92ffffff]
[ 0.477968] pci 0000:00:1c.1: bridge window [mem 0x91000000-0x91ffffff 64bit pref]
[ 0.477980] pci 0000:00:1e.0: PCI bridge to [bus 03-03]
[ 0.478056] pci 0000:00:1e.0: setting latency timer to 64
[ 0.478066] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.478072] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.478078] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.478084] pci_bus 0000:00: resource 7 [mem 0x80000000-0xfebfffff]
[ 0.478092] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
[ 0.478100] pci_bus 0000:01: resource 1 [mem 0x93000000-0x93ffffff]
[ 0.478108] pci_bus 0000:01: resource 2 [mem 0x90000000-0x90ffffff 64bit pref]
[ 0.478118] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff]
[ 0.478126] pci_bus 0000:02: resource 1 [mem 0x92000000-0x92ffffff]
[ 0.478133] pci_bus 0000:02: resource 2 [mem 0x91000000-0x91ffffff 64bit pref]
[ 0.478140] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
[ 0.478146] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
[ 0.478152] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.478158] pci_bus 0000:03: resource 7 [mem 0x80000000-0xfebfffff]
[ 0.478313] NET: Registered protocol family 2
[ 0.478433] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.478899] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.479850] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.480335] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.480342] TCP: reno registered
[ 0.480356] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.480375] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.480623] NET: Registered protocol family 1
[ 0.480659] pci 0000:00:02.0: Boot video device
[ 0.496146] PCI: CLS 64 bytes, default 64
[ 0.496274] Unpacking initramfs...
[ 0.607845] Freeing initrd memory: 2340k freed
[ 0.609629] Simple Boot Flag at 0x44 set to 0x1
[ 0.610585] audit: initializing netlink socket (disabled)
[ 0.610610] type=2000 audit(1333372209.604:1): initialized
[ 0.640434] highmem bounce pool size: 64 pages
[ 0.640446] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.641369] VFS: Disk quotas dquot_6.5.2
[ 0.641429] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.641582] msgmni has been set to 1726
[ 0.641941] alg: No test for stdrng (krng)
[ 0.642021] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.642030] io scheduler noop registered
[ 0.642035] io scheduler deadline registered
[ 0.642075] io scheduler cfq registered (default)
[ 0.642307] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[ 0.642507] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[ 0.642688] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.642750] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.642755] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.643423] intel_idle: MWAIT substates: 0x20220
[ 0.643449] intel_idle: v0.4 model 0x1C
[ 0.643454] intel_idle: lapic_timer_reliable_states 0x2
[ 0.643461] Marking TSC unstable due to TSC halts in idle states deeper than C2
[ 0.643542] GHES: HEST is not enabled!
[ 0.643572] isapnp: Scanning for PnP cards...
[ 0.997367] isapnp: No Plug & Play device found
[ 0.997544] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.998637] Linux agpgart interface v0.103
[ 0.998849] agpgart-intel 0000:00:00.0: Intel GMA3150 Chipset
[ 0.999059] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
[ 0.999323] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[ 0.999582] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x80000000
[ 0.999907] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12
[ 1.005144] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.005160] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.005506] mousedev: PS/2 mouse device common for all mice
[ 1.005609] rtc_cmos 00:03: RTC can wake from S4
[ 1.005820] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 1.005862] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 1.005993] cpuidle: using governor ladder
[ 1.006140] cpuidle: using governor menu
[ 1.006379] TCP: cubic registered
[ 1.006497] NET: Registered protocol family 10
[ 1.006950] Mobile IPv6
[ 1.006958] NET: Registered protocol family 17
[ 1.006968] Registering the dns_resolver key type
[ 1.007045] Using IPI No-Shortcut mode
[ 1.007349] PM: Hibernation image not present or could not be loaded.
[ 1.007383] registered taskstats version 1
[ 1.008425] rtc_cmos 00:03: setting system clock to 2012-04-02 13:10:10 UTC (1333372210)
[ 1.008565] Initializing network drop monitor service
[ 1.008779] Freeing unused kernel memory: 408k freed
[ 1.009106] Write protecting the kernel text: 2844k
[ 1.009186] Write protecting the kernel read-only data: 1068k
[ 1.009192] NX-protecting the kernel data: 3300k
[ 1.044023] udevd[51]: starting version 175
[ 1.132436] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.174324] ACPI Warning: For \_TZ_.THRM._AL0: Return Package has no elements (empty) (20120320/nspredef-463)
[ 1.174348] ACPI: [Package] has zero elements (f562a4a0)
[ 1.174432] ACPI: Invalid active0 threshold
[ 1.179926] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.179936] ACPI: Thermal Zone [THRM] (32 C)
[ 1.223311] SCSI subsystem initialized
[ 1.231067] libata version 3.00 loaded.
[ 1.234771] ahci 0000:00:1f.2: version 3.0
[ 1.234904] ahci 0000:00:1f.2: irq 42 for MSI/MSI-X
[ 1.235106] ahci: SSS flag set, parallel bus scan disabled
[ 1.235168] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
[ 1.235181] ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pmp pio slum part
[ 1.235197] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.241128] scsi0 : ahci
[ 1.244865] scsi1 : ahci
[ 1.248487] scsi2 : ahci
[ 1.250354] scsi3 : ahci
[ 1.253407] ata1: SATA max UDMA/133 abar m1024@0x94204000 port 0x94204100 irq 42
[ 1.253420] ata2: SATA max UDMA/133 abar m1024@0x94204000 port 0x94204180 irq 42
[ 1.253429] ata3: DUMMY
[ 1.253434] ata4: DUMMY
[ 1.743506] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.744389] ata1.00: unexpected _GTF length (4)
[ 1.798752] ata1.00: ATA-8: ST9250315AS, 0001SDM1, max UDMA/133
[ 1.798764] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.800581] ata1.00: unexpected _GTF length (4)
[ 1.800941] ata1.00: configured for UDMA/133
[ 1.801220] scsi 0:0:0:0: Direct-Access ATA ST9250315AS 0001 PQ: 0 ANSI: 5
[ 2.123509] ata2: SATA link down (SStatus 0 SControl 300)
[ 2.134483] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 2.134714] sd 0:0:0:0: [sda] Write Protect is off
[ 2.134725] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.134821] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.253133] sda: sda1 sda2
[ 2.254059] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.658093] PM: Starting manual resume from disk
[ 2.658102] PM: Hibernation image partition 8:1 present
[ 2.658106] PM: Looking for hibernation image.
[ 2.658705] PM: Image not found (code -22)
[ 2.658709] PM: Hibernation image not present or could not be loaded.
[ 2.666923] REISERFS (device sda2): found reiserfs format "3.6" with standard journal
[ 2.666950] REISERFS (device sda2): using ordered data mode
[ 2.666955] reiserfs: using flush barriers
[ 2.678612] REISERFS (device sda2): journal params: device sda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 2.679181] REISERFS (device sda2): checking transaction log (sda2)
[ 2.793638] REISERFS (device sda2): Using r5 hash to sort names
[ 5.167557] udevd[249]: starting version 175
[ 6.358470] ACPI: Requesting acpi_cpufreq
[ 6.380254] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 6.380274] ACPI: Power Button [PWRB]
[ 6.383689] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
[ 6.391669] ACPI: Lid Switch [LID0]
[ 6.391981] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 6.391999] ACPI: Power Button [PWRF]
[ 6.438646] ACPI: AC Adapter [AC] (on-line)
[ 6.519678] usbcore: registered new interface driver usbfs
[ 6.519760] usbcore: registered new interface driver hub
[ 6.525173] usbcore: registered new device driver usb
[ 6.538587] bcma: Found chip with id 0x4313, rev 0x01 and package 0x08
[ 6.538633] bcma: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x24, class 0x0)
[ 6.538669] bcma: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x18, class 0x0)
[ 6.538732] bcma: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x11, class 0x0)
[ 6.541345] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 6.541443] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 6.541454] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 6.541556] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 6.541614] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[ 6.541639] ehci_hcd 0000:00:1d.7: debug port 1
[ 6.545538] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 6.545674] ehci_hcd 0000:00:1d.7: irq 16, io mem 0x94204400
[ 6.547712] ACPI: Battery Slot [BAT0] (battery present)
[ 6.548321] wmi: Mapper loaded
[ 6.552183] rts_pstor: module is from the staging directory, the quality is unknown, you have been warned.
[ 6.554455] Initializing Realtek PCIE storage driver...
[ 6.557669] Resource length: 0x10000
[ 6.557743] Original address: 0x93000000, remapped address: 0xf85a0000
[ 6.557758] pci->irq = 17
[ 6.557766] rtsx_acquire_irq: chip->msi_en = 0, pci->irq = 17
[ 6.560779] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 6.560852] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 6.560862] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 6.560871] usb usb1: Product: EHCI Host Controller
[ 6.560878] usb usb1: Manufacturer: Linux 3.4.0-rc1 ehci_hcd
[ 6.560885] usb usb1: SerialNumber: 0000:00:1d.7
[ 6.561274] hub 1-0:1.0: USB hub found
[ 6.561292] hub 1-0:1.0: 8 ports detected
[ 6.570138] iTCO_vendor_support: vendor-support=0
[ 6.570637] bcma: Bus registered
[ 6.573774] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[ 6.574045] iTCO_wdt: Found a NM10 TCO device (Version=2, TCOBASE=0x0460)
[ 6.574205] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 6.697827] uhci_hcd: USB Universal Host Controller Interface driver
[ 6.697944] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 6.697955] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 6.697990] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 6.698048] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00003080
[ 6.698177] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 6.698187] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 6.698195] usb usb2: Product: UHCI Host Controller
[ 6.698202] usb usb2: Manufacturer: Linux 3.4.0-rc1 uhci_hcd
[ 6.698209] usb usb2: SerialNumber: 0000:00:1d.0
[ 6.699744] hub 2-0:1.0: USB hub found
[ 6.699760] hub 2-0:1.0: 2 ports detected
[ 6.699978] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 6.699987] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 6.700008] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 6.700080] uhci_hcd 0000:00:1d.1: irq 18, io base 0x00003060
[ 6.700161] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 6.700168] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 6.700174] usb usb3: Product: UHCI Host Controller
[ 6.700179] usb usb3: Manufacturer: Linux 3.4.0-rc1 uhci_hcd
[ 6.700184] usb usb3: SerialNumber: 0000:00:1d.1
[ 6.700687] hub 3-0:1.0: USB hub found
[ 6.700706] hub 3-0:1.0: 2 ports detected
[ 6.700933] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 6.700941] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 6.700962] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 6.701004] uhci_hcd 0000:00:1d.2: irq 17, io base 0x00003040
[ 6.701086] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 6.701093] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 6.701098] usb usb4: Product: UHCI Host Controller
[ 6.701103] usb usb4: Manufacturer: Linux 3.4.0-rc1 uhci_hcd
[ 6.701109] usb usb4: SerialNumber: 0000:00:1d.2
[ 6.701431] hub 4-0:1.0: USB hub found
[ 6.701448] hub 4-0:1.0: 2 ports detected
[ 6.701670] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 6.701679] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 6.701699] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 6.701769] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00003020
[ 6.701852] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 6.701859] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 6.701865] usb usb5: Product: UHCI Host Controller
[ 6.701870] usb usb5: Manufacturer: Linux 3.4.0-rc1 uhci_hcd
[ 6.701875] usb usb5: SerialNumber: 0000:00:1d.3
[ 6.702186] hub 5-0:1.0: USB hub found
[ 6.702202] hub 5-0:1.0: 2 ports detected
[ 6.716868] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 6.755834] scsi4 : SCSI emulation for PCI-Express Mass Storage devices
[ 6.756088] rts_pstor: waiting for device to settle before scanning
[ 6.756719] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 6.756851] r8169 0000:01:00.0: (unregistered net_device): unknown MAC, using family default
[ 6.757081] r8169 0000:01:00.0: irq 43 for MSI/MSI-X
[ 6.757689] r8169 0000:01:00.0: eth0: RTL8101e at 0xf8332000, 68:b5:99:d3:c1:d8, XID 04000000 IRQ 43
[ 6.776895] [drm] Initialized drm 1.1.0 20060810
[ 6.796716] i915 0000:00:02.0: power state changed by ACPI to D0
[ 6.796728] i915 0000:00:02.0: power state changed by ACPI to D0
[ 6.797438] i915 0000:00:02.0: setting latency timer to 64
[ 6.845152] i915 0000:00:02.0: irq 44 for MSI/MSI-X
[ 6.845176] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 6.845181] [drm] Driver supports precise vblank timestamp query.
[ 6.845254] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 6.871831] usb 1-8: new high-speed USB device number 2 using ehci_hcd
[ 6.904046] input: HP WMI hotkeys as /devices/virtual/input/input5
[ 6.926875] cfg80211: Calling CRDA to update world regulatory domain
[ 7.078025] usb 1-8: New USB device found, idVendor=174f, idProduct=1122
[ 7.078035] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 7.078043] usb 1-8: Product: HP Webcam
[ 7.078049] usb 1-8: Manufacturer: D-MAX
[ 7.078054] usb 1-8: SerialNumber: 00
[ 7.144704] brcmsmac bcma0:0: mfg 4bf core 812 rev 24 class 0 irq 17
[ 7.282890] [drm] initialized overlay support
[ 7.308966] fbcon: inteldrmfb (fb0) is primary device
[ 7.601585] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.4, id: 0x1e0b1, caps: 0xd04773/0xa40000/0xa0400
[ 7.647083] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
[ 7.739627] Console: switching to colour frame buffer device 128x37
[ 7.752376] fb0: inteldrmfb frame buffer device
[ 7.752383] drm: registered panic notifier
[ 7.754385] rts_pstor: device scan complete
[ 7.754603] scsi 4:0:0:0: Direct-Access Generic- xD/SD/M.S. 1.00 PQ: 0 ANSI: 0 CCS
[ 7.754724] Bad LUN (0:1)
[ 7.754981] Bad target number (1:0)
[ 7.755245] Bad target number (2:0)
[ 7.755514] Bad target number (3:0)
[ 7.755777] Bad target number (4:0)
[ 7.756040] Bad target number (5:0)
[ 7.756298] Bad target number (6:0)
[ 7.756558] Bad target number (7:0)
[ 7.758057] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 7.761884] acpi device:21: registered as cooling_device2
[ 7.762513] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input7
[ 7.762694] ACPI: Video Device [OVGA] (multi-head: yes rom: no post: no)
[ 7.762842] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 7.763075] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[ 7.789419] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 7.862407] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8
[ 7.873638] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 7.873943] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 7.974247] Linux media interface: v0.10
[ 8.024908] Linux video capture interface: v2.00
[ 8.224418] uvcvideo: Found UVC 1.00 device HP Webcam (174f:1122)
[ 8.237912] input: HP Webcam as /devices/pci0000:00/0000:00:1d.7/usb1/1-8/1-8:1.0/input/input11
[ 8.238173] usbcore: registered new interface driver uvcvideo
[ 8.238180] USB Video Class driver (1.1.1)
[ 8.728511] cfg80211: World regulatory domain updated:
[ 8.728519] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 8.728527] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 8.728533] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 8.728540] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 8.728546] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 8.728552] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 8.728578] cfg80211: Calling CRDA for country: US
[ 8.741297] cfg80211: Regulatory domain changed to country: US
[ 8.741304] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 8.741312] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[ 8.741319] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[ 8.741325] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 8.741331] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 8.741338] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 8.741344] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[ 8.741369] cfg80211: Calling CRDA for country: ES
[ 8.754268] cfg80211: Regulatory domain changed to country: ES
[ 8.754276] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 8.754284] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 8.754290] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 8.754296] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 8.754302] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
[ 10.510372] Adding 3905532k swap on /dev/sda1. Priority:-1 extents:1 across:3905532k
[ 10.720228] reiserfs: enabling write barrier flush mode
[ 11.034230] loop: module loaded
[ 14.627810] fuse init (API version 7.18)
[ 19.790888] r8169 0000:01:00.0: eth0: link down
[ 19.791287] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 19.846929] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 19.849328] ieee80211 phy0: brcms_ops_config: change power-save mode: false (implement)
[ 19.852443] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 22.464458] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input12
[ 25.631961] lp: driver loaded but no devices found
[ 25.917333] ppdev: user-space parallel port driver
[ 70.866538] wlan0: authenticate with 00:23:f8:9d:ad:11
[ 70.870693] wlan0: send auth to 00:23:f8:9d:ad:11 (try 1/3)
[ 70.872224] wlan0: authenticated
[ 70.878615] wlan0: associate with 00:23:f8:9d:ad:11 (try 1/3)
[ 70.881110] wlan0: RX AssocResp from 00:23:f8:9d:ad:11 (capab=0x471 status=0 aid=2)
[ 70.881117] wlan0: associated
[ 70.882096] ieee80211 phy0: brcmsmac: brcms_ops_bss_info_changed: associated
[ 70.882106] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering: enabled true, count 0 (implement)
[ 70.882112] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 70.882642] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 82.866461] wlan0: no IPv6 routers present
[ 92.004832] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering: enabled true, count 1 (implement)
[ 153.114894] ieee80211 phy0: brcmsmac: brcms_ops_bss_info_changed: disassociated
[ 153.114923] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering: enabled false, count 1 (implement)
[ 153.114940] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 153.121722] cfg80211: Calling CRDA to update world regulatory domain
[ 153.140884] cfg80211: World regulatory domain updated:
[ 153.140892] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 153.140899] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 153.140906] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 153.140912] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 153.140918] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 153.140925] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 153.140953] cfg80211: Calling CRDA for country: ES
[ 153.154239] cfg80211: Regulatory domain changed to country: ES
[ 153.154246] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 153.154254] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 153.154260] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 153.154266] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 153.154272] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
[ 153.281590] ------------[ cut here ]------------
[ 153.281653] WARNING: at drivers/net/wireless/brcm80211/brcmsmac/main.c:7983 brcms_c_wait_for_tx_completion+0x73/0x7d [brcmsmac]()
[ 153.281664] Hardware name: Compaq Mini CQ10-500
[ 153.281672] Modules linked in: cpufreq_powersave cpufreq_stats cpufreq_userspace cpufreq_conservative parport_pc ppdev lp parport binfmt_misc uinput fuse loop uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_core videodev media joydev snd_hda_codec_idt arc4 snd_hda_intel snd_hda_codec snd_hwdep snd_pcm snd_page_alloc brcmsmac cordic crc8 brcmutil snd_seq snd_seq_device snd_timer snd soundcore mac80211 cfg80211 hp_wmi i915 drm_kms_helper drm psmouse sparse_keymap rfkill pcspkr evdev serio_raw uhci_hcd r8169 i2c_i801 i2c_algo_bit iTCO_wdt iTCO_vendor_support rts_pstor(C) mii ehci_hcd wmi bcma i2c_core usbcore battery acpi_cpufreq mperf ac usb_common video power_supply button processor reiserfs sd_mod crc_t10dif ahci libahci libata scsi_mod thermal thermal_sys
[ 153.281868] Pid: 140, comm: kworker/u:3 Tainted: G C 3.4.0-rc1 #1
[ 153.281876] Call Trace:
[ 153.281898] [<c102ca02>] ? warn_slowpath_common+0x68/0x79
[ 153.281938] [<f86a7c6d>] ? brcms_c_wait_for_tx_completion+0x73/0x7d [brcmsmac]
[ 153.281953] [<c102ca20>] ? warn_slowpath_null+0xd/0x10
[ 153.281991] [<f86a7c6d>] ? brcms_c_wait_for_tx_completion+0x73/0x7d [brcmsmac]
[ 153.282024] [<f869f0ea>] ? brcms_ops_flush+0x1f/0x29 [brcmsmac]
[ 153.282072] [<f880b9cb>] ? __ieee80211_recalc_idle+0x1b2/0x1dd [mac80211]
[ 153.282087] [<c104c42d>] ? try_to_wake_up+0x153/0x15d
[ 153.282100] [<c1046ec0>] ? should_resched+0x5/0x1e
[ 153.282146] [<f880c53c>] ? ieee80211_recalc_idle+0x19/0x36 [mac80211]
[ 153.282204] [<f8825c09>] ? ieee80211_sta_connection_lost.isra.15+0x6a/0x94 [mac80211]
[ 153.282266] [<f8827b4d>] ? ieee80211_sta_work+0x7d9/0x869 [mac80211]
[ 153.282279] [<c1049f04>] ? finish_task_switch+0x4c/0x7f
[ 153.282293] [<c12c049b>] ? __schedule+0x435/0x445
[ 153.282305] [<c106474d>] ? arch_local_irq_save+0xf/0x14
[ 153.282351] [<f880ae49>] ? ieee80211_iface_work+0x227/0x27b [mac80211]
[ 153.282367] [<c103e3e7>] ? process_one_work+0x112/0x1fa
[ 153.282412] [<f880ac22>] ? ieee80211_teardown_sdata+0xbb/0xbb [mac80211]
[ 153.282424] [<c103ec50>] ? worker_thread+0xa9/0x122
[ 153.282436] [<c103eba7>] ? manage_workers.isra.23+0x13d/0x13d
[ 153.282449] [<c1041668>] ? kthread+0x68/0x6d
[ 153.282462] [<c1041600>] ? kthread_freezable_should_stop+0x37/0x37
[ 153.282475] [<c12c5afe>] ? kernel_thread_helper+0x6/0x10
[ 153.282483] ---[ end trace 9220a61ec50d085a ]---
[ 154.146985] wlan0: authenticate with 00:23:f8:9d:ad:11
[ 154.148818] wlan0: send auth to 00:23:f8:9d:ad:11 (try 1/3)
[ 154.353607] wlan0: send auth to 00:23:f8:9d:ad:11 (try 2/3)
[ 154.470414] wlan0: authenticated
[ 154.473641] wlan0: associate with 00:23:f8:9d:ad:11 (try 1/3)
[ 154.677606] wlan0: associate with 00:23:f8:9d:ad:11 (try 2/3)
[ 154.808869] wlan0: RX AssocResp from 00:23:f8:9d:ad:11 (capab=0x471 status=0 aid=2)
[ 154.808882] wlan0: associated
[ 154.810709] ieee80211 phy0: brcmsmac: brcms_ops_bss_info_changed: associated
[ 154.810726] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering: enabled true, count 1 (implement)
[ 154.810737] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 244.309750] ieee80211 phy0: brcmsmac: brcms_ops_bss_info_changed: disassociated
[ 244.309779] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering: enabled false, count 1 (implement)
[ 244.309797] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 244.320552] cfg80211: Calling CRDA to update world regulatory domain
[ 244.338128] cfg80211: World regulatory domain updated:
[ 244.338136] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 244.338144] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 244.338151] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 244.338157] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 244.338163] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 244.338170] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 244.338196] cfg80211: Calling CRDA for country: ES
[ 244.351238] cfg80211: Regulatory domain changed to country: ES
[ 244.351246] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 244.351253] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 244.351259] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 244.351265] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 244.351271] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
[ 245.345808] wlan0: authenticate with 00:23:f8:9d:ad:11
[ 245.347639] wlan0: send auth to 00:23:f8:9d:ad:11 (try 1/3)
[ 245.548431] wlan0: send auth to 00:23:f8:9d:ad:11 (try 2/3)
[ 245.752422] wlan0: send auth to 00:23:f8:9d:ad:11 (try 3/3)
[ 245.956452] wlan0: authentication with 00:23:f8:9d:ad:11 timed out
[ 251.829501] wlan0: authenticate with 00:23:f8:9d:ad:11
[ 251.830102] wlan0: direct probe to 00:23:f8:9d:ad:11 (try 1/3)
[ 252.032391] wlan0: direct probe to 00:23:f8:9d:ad:11 (try 2/3)
[ 252.236387] wlan0: direct probe to 00:23:f8:9d:ad:11 (try 3/3)
[ 252.440370] wlan0: authentication with 00:23:f8:9d:ad:11 timed out
[ 258.309515] wlan0: authenticate with 00:23:f8:9d:ad:11
[ 258.311384] wlan0: direct probe to 00:23:f8:9d:ad:11 (try 1/3)
[ 258.512318] wlan0: direct probe to 00:23:f8:9d:ad:11 (try 2/3)
[ 258.716316] wlan0: send auth to 00:23:f8:9d:ad:11 (try 3/3)
[ 258.920271] wlan0: authentication with 00:23:f8:9d:ad:11 timed out
[ 381.238100] wlan0: authenticate with 00:23:f8:9d:ad:11
[ 381.238217] wlan0: direct probe to 00:23:f8:9d:ad:11 (try 1/3)
[ 381.442752] wlan0: direct probe to 00:23:f8:9d:ad:11 (try 2/3)
[ 381.646728] wlan0: direct probe to 00:23:f8:9d:ad:11 (try 3/3)
[ 381.850739] wlan0: authentication with 00:23:f8:9d:ad:11 timed out
[ 387.719808] wlan0: authenticate with 00:23:f8:9d:ad:11
[ 387.721034] wlan0: direct probe to 00:23:f8:9d:ad:11 (try 1/3)
[ 387.922673] wlan0: direct probe to 00:23:f8:9d:ad:11 (try 2/3)
[ 388.126664] wlan0: direct probe to 00:23:f8:9d:ad:11 (try 3/3)
[ 388.330644] wlan0: authentication with 00:23:f8:9d:ad:11 timed out
[ 394.199389] wlan0: authenticate with 00:23:f8:9d:ad:11
[ 394.200401] wlan0: direct probe to 00:23:f8:9d:ad:11 (try 1/3)
[ 394.402552] wlan0: direct probe to 00:23:f8:9d:ad:11 (try 2/3)
[ 394.606579] wlan0: send auth to 00:23:f8:9d:ad:11 (try 3/3)
[ 394.613288] wlan0: authenticated
[ 394.618603] wlan0: associate with 00:23:f8:9d:ad:11 (try 1/3)
[ 394.693478] wlan0: RX AssocResp from 00:23:f8:9d:ad:11 (capab=0x471 status=0 aid=2)
[ 394.693491] wlan0: associated
[ 394.695478] ieee80211 phy0: brcmsmac: brcms_ops_bss_info_changed: associated
[ 394.695495] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering: enabled true, count 0 (implement)
[ 394.695507] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 407.314406] wlan0: no IPv6 routers present
[ 417.004690] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering: enabled true, count 1 (implement)
