2012/3/28 Arend van Spriel <arend@xxxxxxxxxxxx>: > On 03/28/2012 01:26 PM, Camaleón wrote: >>> Did you have any opportunity to test the patch? >> >> >> I did manage to compile and install the full 3.3 kernel sources with >> the patch applied last night but until a couple a hours or so I cannot >> start the netbook because is located in a different place :-) >> >> Will provide any feedback as soon as I got news. >> >> Greetings, >> > > Thanks. Here it goes. There's another trace, so now I doubt that I have applied the patches correctly... Mmm, how could check if the brcmsmac module which I have compiled and loaded has the patch applied? :-? Greetings, -- Camaleón
Mar 28 14:13:29 stt300 kernel: imklog 5.8.9, log source = /proc/kmsg started. Mar 28 14:13:29 stt300 rsyslogd: [origin software="rsyslogd" swVersion="5.8.9" x-pid="1055" x-info="http://www.rsyslog.com";] start Mar 28 14:13:29 stt300 kernel: [ 0.000000] Initializing cgroup subsys cpuset Mar 28 14:13:29 stt300 kernel: [ 0.000000] Initializing cgroup subsys cpu Mar 28 14:13:29 stt300 kernel: [ 0.000000] Linux version 3.3.0 (root@stt300) (gcc version 4.6.3 (Debian 4.6.3-1) ) #2 SMP Tue Mar 27 22:39:03 CEST 2012 Mar 28 14:13:29 stt300 kernel: [ 0.000000] Disabled fast string operations Mar 28 14:13:29 stt300 kernel: [ 0.000000] BIOS-provided physical RAM map: Mar 28 14:13:29 stt300 kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) Mar 28 14:13:29 stt300 kernel: [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) Mar 28 14:13:29 stt300 kernel: [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) Mar 28 14:13:29 stt300 kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 000000007f43f000 (usable) Mar 28 14:13:29 stt300 kernel: [ 0.000000] BIOS-e820: 000000007f43f000 - 000000007f4bf000 (reserved) Mar 28 14:13:29 stt300 kernel: [ 0.000000] BIOS-e820: 000000007f4bf000 - 000000007f5bf000 (ACPI NVS) Mar 28 14:13:29 stt300 kernel: [ 0.000000] BIOS-e820: 000000007f5bf000 - 000000007f5f7000 (ACPI data) Mar 28 14:13:29 stt300 kernel: [ 0.000000] BIOS-e820: 000000007f5f7000 - 000000007f600000 (usable) Mar 28 14:13:29 stt300 kernel: [ 0.000000] BIOS-e820: 000000007f600000 - 0000000080000000 (reserved) Mar 28 14:13:29 stt300 kernel: [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) Mar 28 14:13:29 stt300 kernel: [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) Mar 28 14:13:29 stt300 kernel: [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) Mar 28 14:13:29 stt300 kernel: [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved) Mar 28 14:13:29 stt300 kernel: [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) Mar 28 14:13:29 stt300 kernel: [ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved) Mar 28 14:13:29 stt300 kernel: [ 0.000000] NX (Execute Disable) protection: active Mar 28 14:13:29 stt300 kernel: [ 0.000000] DMI 2.6 present. Mar 28 14:13:29 stt300 kernel: [ 0.000000] last_pfn = 0x7f600 max_arch_pfn = 0x1000000 Mar 28 14:13:29 stt300 kernel: [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 Mar 28 14:13:29 stt300 kernel: [ 0.000000] init_memory_mapping: 0000000000000000-00000000379fe000 Mar 28 14:13:29 stt300 kernel: [ 0.000000] RAMDISK: 37b5e000 - 37da7000 Mar 28 14:13:29 stt300 kernel: [ 0.000000] Allocated new RAMDISK: 377b5000 - 379fd062 Mar 28 14:13:29 stt300 kernel: [ 0.000000] Move RAMDISK from 0000000037b5e000 - 0000000037da6061 to 377b5000 - 379fd061 Mar 28 14:13:29 stt300 kernel: [ 0.000000] ACPI: RSDP 000fe020 00024 (v02 HP ) Mar 28 14:13:29 stt300 kernel: [ 0.000000] ACPI: XSDT 7f5f6120 00074 (v01 HPQOEM SLIC-MPC 00000001 01000013) Mar 28 14:13:29 stt300 kernel: [ 0.000000] ACPI: FACP 7f5f5000 000F4 (v04 HP SLIC-MPC 00000001 MSFT 01000013) Mar 28 14:13:29 stt300 kernel: [ 0.000000] ACPI: DSDT 7f5e6000 0BA96 (v01 HP SLIC-MPC 00000001 MSFT 01000013) Mar 28 14:13:29 stt300 kernel: [ 0.000000] ACPI: FACS 7f589000 00040 Mar 28 14:13:29 stt300 kernel: [ 0.000000] ACPI: HPET 7f5f4000 00038 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013) Mar 28 14:13:29 stt300 kernel: [ 0.000000] ACPI: APIC 7f5f3000 00078 (v02 HPQOEM SLIC-MPC 00000001 MSFT 01000013) Mar 28 14:13:29 stt300 kernel: [ 0.000000] ACPI: MCFG 7f5f2000 0003C (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013) Mar 28 14:13:29 stt300 kernel: [ 0.000000] ACPI: SLIC 7f5e5000 00176 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013) Mar 28 14:13:29 stt300 kernel: [ 0.000000] ACPI: BOOT 7f5e4000 00028 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013) Mar 28 14:13:29 stt300 kernel: [ 0.000000] ACPI: SSDT 7f5e3000 004C4 (v02 PmRef CpuPm 00003000 INTL 20051117) Mar 28 14:13:29 stt300 kernel: [ 0.000000] ACPI: SSDT 7f5e2000 001F7 (v02 PmRef Cpu0Tst 00003000 INTL 20051117) Mar 28 14:13:29 stt300 kernel: [ 0.000000] ACPI: SSDT 7f5e1000 00064 (v02 PmRef Cpu1Tst 00003000 INTL 20051117) Mar 28 14:13:29 stt300 kernel: [ 0.000000] ACPI: WDAT 7f5e0000 00194 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013) Mar 28 14:13:29 stt300 kernel: [ 0.000000] 1148MB HIGHMEM available. Mar 28 14:13:29 stt300 kernel: [ 0.000000] 889MB LOWMEM available. Mar 28 14:13:29 stt300 kernel: [ 0.000000] mapped low ram: 0 - 379fe000 Mar 28 14:13:29 stt300 kernel: [ 0.000000] low ram: 0 - 379fe000 Mar 28 14:13:29 stt300 kernel: [ 0.000000] Zone PFN ranges: Mar 28 14:13:29 stt300 kernel: [ 0.000000] DMA 0x00000010 -> 0x00001000 Mar 28 14:13:29 stt300 kernel: [ 0.000000] Normal 0x00001000 -> 0x000379fe Mar 28 14:13:29 stt300 kernel: [ 0.000000] HighMem 0x000379fe -> 0x0007f600 Mar 28 14:13:29 stt300 kernel: [ 0.000000] Movable zone start PFN for each node Mar 28 14:13:29 stt300 kernel: [ 0.000000] Early memory PFN ranges Mar 28 14:13:29 stt300 kernel: [ 0.000000] 0: 0x00000010 -> 0x0000009f Mar 28 14:13:29 stt300 kernel: [ 0.000000] 0: 0x00000100 -> 0x0007f43f Mar 28 14:13:29 stt300 kernel: [ 0.000000] 0: 0x0007f5f7 -> 0x0007f600 Mar 28 14:13:29 stt300 kernel: [ 0.000000] Using APIC driver default Mar 28 14:13:29 stt300 kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0x408 Mar 28 14:13:29 stt300 kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Mar 28 14:13:29 stt300 kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) Mar 28 14:13:29 stt300 kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled) Mar 28 14:13:29 stt300 kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled) Mar 28 14:13:29 stt300 kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) Mar 28 14:13:29 stt300 kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) Mar 28 14:13:29 stt300 kernel: [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) Mar 28 14:13:29 stt300 kernel: [ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23 Mar 28 14:13:29 stt300 kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) Mar 28 14:13:29 stt300 kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) Mar 28 14:13:29 stt300 kernel: [ 0.000000] Using ACPI (MADT) for SMP configuration information Mar 28 14:13:29 stt300 kernel: [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 Mar 28 14:13:29 stt300 kernel: [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs Mar 28 14:13:29 stt300 kernel: [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 Mar 28 14:13:29 stt300 kernel: [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 Mar 28 14:13:29 stt300 kernel: [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 Mar 28 14:13:29 stt300 kernel: [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:60000000) Mar 28 14:13:29 stt300 kernel: [ 0.000000] Booting paravirtualized kernel on bare hardware Mar 28 14:13:29 stt300 kernel: [ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1 Mar 28 14:13:29 stt300 kernel: [ 0.000000] PERCPU: Embedded 13 pages/cpu @f6400000 s32384 r0 d20864 u524288 Mar 28 14:13:29 stt300 kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 517098 Mar 28 14:13:29 stt300 kernel: [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.3.0 root=UUID=ef88aa1c-5071-41ac-8884-6c991eca9b22 ro quiet Mar 28 14:13:29 stt300 kernel: [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) Mar 28 14:13:29 stt300 kernel: [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Mar 28 14:13:29 stt300 kernel: [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Mar 28 14:13:29 stt300 kernel: [ 0.000000] Initializing CPU#0 Mar 28 14:13:29 stt300 kernel: [ 0.000000] allocated 4173696 bytes of page_cgroup Mar 28 14:13:29 stt300 kernel: [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups Mar 28 14:13:29 stt300 kernel: [ 0.000000] Initializing HighMem for node 0 (000379fe:0007f600) Mar 28 14:13:29 stt300 kernel: [ 0.000000] Memory: 2055744k/2086912k available (2821k kernel code, 28956k reserved, 1322k data, 404k init, 1173800k highmem) Mar 28 14:13:29 stt300 kernel: [ 0.000000] virtual kernel memory layout: Mar 28 14:13:29 stt300 kernel: [ 0.000000] fixmap : 0xffd36000 - 0xfffff000 (2852 kB) Mar 28 14:13:29 stt300 kernel: [ 0.000000] pkmap : 0xffa00000 - 0xffc00000 (2048 kB) Mar 28 14:13:29 stt300 kernel: [ 0.000000] vmalloc : 0xf81fe000 - 0xff9fe000 ( 120 MB) Mar 28 14:13:29 stt300 kernel: [ 0.000000] lowmem : 0xc0000000 - 0xf79fe000 ( 889 MB) Mar 28 14:13:29 stt300 kernel: [ 0.000000] .init : 0xc140c000 - 0xc1471000 ( 404 kB) Mar 28 14:13:29 stt300 kernel: [ 0.000000] .data : 0xc12c15f8 - 0xc140be80 (1322 kB) Mar 28 14:13:29 stt300 kernel: [ 0.000000] .text : 0xc1000000 - 0xc12c15f8 (2821 kB) Mar 28 14:13:29 stt300 kernel: [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. Mar 28 14:13:29 stt300 kernel: [ 0.000000] Hierarchical RCU implementation. Mar 28 14:13:29 stt300 kernel: [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. Mar 28 14:13:29 stt300 kernel: [ 0.000000] NR_IRQS:2304 nr_irqs:712 16 Mar 28 14:13:29 stt300 kernel: [ 0.000000] Console: colour VGA+ 80x25 Mar 28 14:13:29 stt300 kernel: [ 0.000000] console [tty0] enabled Mar 28 14:13:29 stt300 kernel: [ 0.000000] Fast TSC calibration using PIT Mar 28 14:13:29 stt300 kernel: [ 0.000000] Detected 1662.643 MHz processor. Mar 28 14:13:29 stt300 kernel: [ 0.004004] Calibrating delay loop (skipped), value calculated using timer frequency.. 3325.28 BogoMIPS (lpj=6650572) Mar 28 14:13:29 stt300 kernel: [ 0.004014] pid_max: default: 32768 minimum: 301 Mar 28 14:13:29 stt300 kernel: [ 0.004105] Security Framework initialized Mar 28 14:13:29 stt300 kernel: [ 0.004113] AppArmor: AppArmor disabled by boot time parameter Mar 28 14:13:29 stt300 kernel: [ 0.004151] Mount-cache hash table entries: 512 Mar 28 14:13:29 stt300 kernel: [ 0.004392] Initializing cgroup subsys cpuacct Mar 28 14:13:29 stt300 kernel: [ 0.004399] Initializing cgroup subsys memory Mar 28 14:13:29 stt300 kernel: [ 0.004420] Initializing cgroup subsys devices Mar 28 14:13:29 stt300 kernel: [ 0.004425] Initializing cgroup subsys freezer Mar 28 14:13:29 stt300 kernel: [ 0.004430] Initializing cgroup subsys net_cls Mar 28 14:13:29 stt300 kernel: [ 0.004435] Initializing cgroup subsys blkio Mar 28 14:13:29 stt300 kernel: [ 0.004450] Initializing cgroup subsys perf_event Mar 28 14:13:29 stt300 kernel: [ 0.004499] Disabled fast string operations Mar 28 14:13:29 stt300 kernel: [ 0.004507] CPU: Physical Processor ID: 0 Mar 28 14:13:29 stt300 kernel: [ 0.004511] CPU: Processor Core ID: 0 Mar 28 14:13:29 stt300 kernel: [ 0.004516] mce: CPU supports 5 MCE banks Mar 28 14:13:29 stt300 kernel: [ 0.004534] using mwait in idle threads. Mar 28 14:13:29 stt300 kernel: [ 0.005082] ACPI: Core revision 20120111 Mar 28 14:13:29 stt300 kernel: [ 0.024107] Enabling APIC mode: Flat. Using 1 I/O APICs Mar 28 14:13:29 stt300 kernel: [ 0.024620] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 Mar 28 14:13:29 stt300 kernel: [ 0.066244] CPU0: Intel(R) Atom(TM) CPU N455 @ 1.66GHz stepping 0a Mar 28 14:13:29 stt300 kernel: [ 0.068003] Performance Events: PEBS fmt0+, Atom events, Intel PMU driver. Mar 28 14:13:29 stt300 kernel: [ 0.068003] ... version: 3 Mar 28 14:13:29 stt300 kernel: [ 0.068003] ... bit width: 40 Mar 28 14:13:29 stt300 kernel: [ 0.068003] ... generic registers: 2 Mar 28 14:13:29 stt300 kernel: [ 0.068003] ... value mask: 000000ffffffffff Mar 28 14:13:29 stt300 kernel: [ 0.068003] ... max period: 000000007fffffff Mar 28 14:13:29 stt300 kernel: [ 0.068003] ... fixed-purpose events: 3 Mar 28 14:13:29 stt300 kernel: [ 0.068003] ... event mask: 0000000700000003 Mar 28 14:13:29 stt300 kernel: [ 0.068003] NMI watchdog enabled, takes one hw-pmu counter. Mar 28 14:13:29 stt300 kernel: [ 0.068003] Booting Node 0, Processors #1 Mar 28 14:13:29 stt300 kernel: [ 0.008000] Initializing CPU#1 Mar 28 14:13:29 stt300 kernel: [ 0.008000] Disabled fast string operations Mar 28 14:13:29 stt300 kernel: [ 0.080069] NMI watchdog enabled, takes one hw-pmu counter. Mar 28 14:13:29 stt300 kernel: [ 0.080145] Brought up 2 CPUs Mar 28 14:13:29 stt300 kernel: [ 0.080152] Total of 2 processors activated (6650.57 BogoMIPS). Mar 28 14:13:29 stt300 kernel: [ 0.080734] devtmpfs: initialized Mar 28 14:13:29 stt300 kernel: [ 0.080734] PM: Registering ACPI NVS region at 7f4bf000 (1048576 bytes) Mar 28 14:13:29 stt300 kernel: [ 0.080734] print_constraints: dummy: Mar 28 14:13:29 stt300 kernel: [ 0.080734] NET: Registered protocol family 16 Mar 28 14:13:29 stt300 kernel: [ 0.080795] ACPI: bus type pci registered Mar 28 14:13:29 stt300 kernel: [ 0.080959] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) Mar 28 14:13:29 stt300 kernel: [ 0.080968] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 Mar 28 14:13:29 stt300 kernel: [ 0.080972] PCI: Using MMCONFIG for extended config space Mar 28 14:13:29 stt300 kernel: [ 0.080977] PCI: Using configuration type 1 for base access Mar 28 14:13:29 stt300 kernel: [ 0.084080] bio: create slab <bio-0> at 0 Mar 28 14:13:29 stt300 kernel: [ 0.084162] ACPI: Added _OSI(Module Device) Mar 28 14:13:29 stt300 kernel: [ 0.084162] ACPI: Added _OSI(Processor Device) Mar 28 14:13:29 stt300 kernel: [ 0.084162] ACPI: Added _OSI(3.0 _SCP Extensions) Mar 28 14:13:29 stt300 kernel: [ 0.084162] ACPI: Added _OSI(Processor Aggregator Device) Mar 28 14:13:29 stt300 kernel: [ 0.091112] ACPI: Executed 1 blocks of module-level executable AML code Mar 28 14:13:29 stt300 kernel: [ 0.095519] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored Mar 28 14:13:29 stt300 kernel: [ 0.096537] ACPI: SSDT 7f494c98 001F7 (v02 PmRef Cpu0Ist 00003000 INTL 20051117) Mar 28 14:13:29 stt300 kernel: [ 0.097377] ACPI: Dynamic OEM Table Load: Mar 28 14:13:29 stt300 kernel: [ 0.097384] ACPI: SSDT (null) 001F7 (v02 PmRef Cpu0Ist 00003000 INTL 20051117) Mar 28 14:13:29 stt300 kernel: [ 0.097693] ACPI: SSDT 7f493e18 001C7 (v02 PmRef Cpu0Cst 00003001 INTL 20051117) Mar 28 14:13:29 stt300 kernel: [ 0.098486] ACPI: Dynamic OEM Table Load: Mar 28 14:13:29 stt300 kernel: [ 0.098493] ACPI: SSDT (null) 001C7 (v02 PmRef Cpu0Cst 00003001 INTL 20051117) Mar 28 14:13:29 stt300 kernel: [ 0.098537] ACPI: SSDT 7f494f18 000D0 (v02 PmRef Cpu1Ist 00003000 INTL 20051117) Mar 28 14:13:29 stt300 kernel: [ 0.100065] ACPI: Dynamic OEM Table Load: Mar 28 14:13:29 stt300 kernel: [ 0.100073] ACPI: SSDT (null) 000D0 (v02 PmRef Cpu1Ist 00003000 INTL 20051117) Mar 28 14:13:29 stt300 kernel: [ 0.100356] ACPI: SSDT 7f492f18 00083 (v02 PmRef Cpu1Cst 00003000 INTL 20051117) Mar 28 14:13:29 stt300 kernel: [ 0.101152] ACPI: Dynamic OEM Table Load: Mar 28 14:13:29 stt300 kernel: [ 0.101160] ACPI: SSDT (null) 00083 (v02 PmRef Cpu1Cst 00003000 INTL 20051117) Mar 28 14:13:29 stt300 kernel: [ 0.904488] ACPI: Interpreter enabled Mar 28 14:13:29 stt300 kernel: [ 0.904504] ACPI: (supports S0 S3 S4 S5) Mar 28 14:13:29 stt300 kernel: [ 0.904570] ACPI: Using IOAPIC for interrupt routing Mar 28 14:13:29 stt300 kernel: [ 0.918268] ACPI: Power Resource [FN00] (on) Mar 28 14:13:29 stt300 kernel: [ 0.919077] ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62 Mar 28 14:13:29 stt300 kernel: [ 0.919453] ACPI: No dock devices found. Mar 28 14:13:29 stt300 kernel: [ 0.919466] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug Mar 28 14:13:29 stt300 kernel: [ 0.920470] ACPI Warning: For \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20120111/nspredef-359) Mar 28 14:13:29 stt300 kernel: [ 0.920505] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) Mar 28 14:13:29 stt300 kernel: [ 0.922058] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] Mar 28 14:13:29 stt300 kernel: [ 0.922066] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] Mar 28 14:13:29 stt300 kernel: [ 0.922072] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] Mar 28 14:13:29 stt300 kernel: [ 0.922081] pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xfebfffff] Mar 28 14:13:29 stt300 kernel: [ 0.922185] PCI host bridge to bus 0000:00 Mar 28 14:13:29 stt300 kernel: [ 0.922191] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] Mar 28 14:13:29 stt300 kernel: [ 0.922197] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] Mar 28 14:13:29 stt300 kernel: [ 0.922203] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] Mar 28 14:13:29 stt300 kernel: [ 0.922209] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff] Mar 28 14:13:29 stt300 kernel: [ 0.930518] pci 0000:00:1c.0: PCI bridge to [bus 01-01] Mar 28 14:13:29 stt300 kernel: [ 0.936093] pci 0000:00:1c.1: PCI bridge to [bus 02-02] Mar 28 14:13:29 stt300 kernel: [ 0.936230] pci 0000:00:1e.0: PCI bridge to [bus 03-03] (subtractive decode) Mar 28 14:13:29 stt300 kernel: [ 0.937326] ACPI Warning: For \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20120111/nspredef-359) Mar 28 14:13:29 stt300 kernel: [ 0.937359] pci0000:00: Requesting ACPI _OSC control (0x1d) Mar 28 14:13:29 stt300 kernel: [ 0.937504] ACPI Warning: For \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20120111/nspredef-359) Mar 28 14:13:29 stt300 kernel: [ 0.937535] pci0000:00: ACPI _OSC request failed (AE_TYPE), returned control mask: 0x1d Mar 28 14:13:29 stt300 kernel: [ 0.937540] ACPI _OSC control for PCIe not granted, disabling ASPM Mar 28 14:13:29 stt300 kernel: [ 0.944295] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12) Mar 28 14:13:29 stt300 kernel: [ 0.944450] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12) Mar 28 14:13:29 stt300 kernel: [ 0.944604] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12) Mar 28 14:13:29 stt300 kernel: [ 0.944754] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12) Mar 28 14:13:29 stt300 kernel: [ 0.944905] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. Mar 28 14:13:29 stt300 kernel: [ 0.945058] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. Mar 28 14:13:29 stt300 kernel: [ 0.945214] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. Mar 28 14:13:29 stt300 kernel: [ 0.945367] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. Mar 28 14:13:29 stt300 kernel: [ 0.945571] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none Mar 28 14:13:29 stt300 kernel: [ 0.945571] vgaarb: loaded Mar 28 14:13:29 stt300 kernel: [ 0.945571] vgaarb: bridge control possible 0000:00:02.0 Mar 28 14:13:29 stt300 kernel: [ 0.945571] PCI: Using ACPI for IRQ routing Mar 28 14:13:29 stt300 kernel: [ 0.955091] HPET: 3 timers in total, 0 timers will be used for per-cpu timer Mar 28 14:13:29 stt300 kernel: [ 0.955106] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 Mar 28 14:13:29 stt300 kernel: [ 0.955117] hpet0: 3 comparators, 64-bit 14.318180 MHz counter Mar 28 14:13:29 stt300 kernel: [ 0.960102] Switching to clocksource hpet Mar 28 14:13:29 stt300 kernel: [ 0.963990] pnp: PnP ACPI init Mar 28 14:13:29 stt300 kernel: [ 0.964044] ACPI: bus type pnp registered Mar 28 14:13:29 stt300 kernel: [ 0.966784] system 00:01: [io 0x0600-0x060f] has been reserved Mar 28 14:13:29 stt300 kernel: [ 0.966792] system 00:01: [io 0x0610] has been reserved Mar 28 14:13:29 stt300 kernel: [ 0.966799] system 00:01: [io 0x0800-0x080f] has been reserved Mar 28 14:13:29 stt300 kernel: [ 0.966806] system 00:01: [io 0x0810-0x0817] has been reserved Mar 28 14:13:29 stt300 kernel: [ 0.966813] system 00:01: [io 0x0400-0x047f] has been reserved Mar 28 14:13:29 stt300 kernel: [ 0.966821] system 00:01: [io 0x0500-0x053f] has been reserved Mar 28 14:13:29 stt300 kernel: [ 0.966829] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved Mar 28 14:13:29 stt300 kernel: [ 0.966837] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved Mar 28 14:13:29 stt300 kernel: [ 0.966844] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved Mar 28 14:13:29 stt300 kernel: [ 0.966852] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved Mar 28 14:13:29 stt300 kernel: [ 0.966860] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved Mar 28 14:13:29 stt300 kernel: [ 0.966868] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved Mar 28 14:13:29 stt300 kernel: [ 0.966875] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved Mar 28 14:13:29 stt300 kernel: [ 0.968135] pnp: PnP ACPI: found 9 devices Mar 28 14:13:29 stt300 kernel: [ 0.968140] ACPI: ACPI bus type pnp unregistered Mar 28 14:13:29 stt300 kernel: [ 0.968147] PnPBIOS: Disabled by ACPI PNP Mar 28 14:13:29 stt300 kernel: [ 1.009245] pci 0000:00:1c.0: PCI bridge to [bus 01-01] Mar 28 14:13:29 stt300 kernel: [ 1.009254] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] Mar 28 14:13:29 stt300 kernel: [ 1.009264] pci 0000:00:1c.0: bridge window [mem 0x93000000-0x93ffffff] Mar 28 14:13:29 stt300 kernel: [ 1.009274] pci 0000:00:1c.0: bridge window [mem 0x90000000-0x90ffffff 64bit pref] Mar 28 14:13:29 stt300 kernel: [ 1.009287] pci 0000:00:1c.1: PCI bridge to [bus 02-02] Mar 28 14:13:29 stt300 kernel: [ 1.009294] pci 0000:00:1c.1: bridge window [io 0x1000-0x1fff] Mar 28 14:13:29 stt300 kernel: [ 1.009304] pci 0000:00:1c.1: bridge window [mem 0x92000000-0x92ffffff] Mar 28 14:13:29 stt300 kernel: [ 1.009313] pci 0000:00:1c.1: bridge window [mem 0x91000000-0x91ffffff 64bit pref] Mar 28 14:13:29 stt300 kernel: [ 1.009326] pci 0000:00:1e.0: PCI bridge to [bus 03-03] Mar 28 14:13:29 stt300 kernel: [ 1.009635] NET: Registered protocol family 2 Mar 28 14:13:29 stt300 kernel: [ 1.009769] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) Mar 28 14:13:29 stt300 kernel: [ 1.010411] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) Mar 28 14:13:29 stt300 kernel: [ 1.011335] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) Mar 28 14:13:29 stt300 kernel: [ 1.011762] TCP: Hash tables configured (established 131072 bind 65536) Mar 28 14:13:29 stt300 kernel: [ 1.011768] TCP reno registered Mar 28 14:13:29 stt300 kernel: [ 1.011778] UDP hash table entries: 512 (order: 2, 16384 bytes) Mar 28 14:13:29 stt300 kernel: [ 1.011797] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) Mar 28 14:13:29 stt300 kernel: [ 1.012086] NET: Registered protocol family 1 Mar 28 14:13:29 stt300 kernel: [ 1.028209] Unpacking initramfs... Mar 28 14:13:29 stt300 kernel: [ 1.137294] Freeing initrd memory: 2340k freed Mar 28 14:13:29 stt300 kernel: [ 1.138986] Simple Boot Flag at 0x44 set to 0x1 Mar 28 14:13:29 stt300 kernel: [ 1.140035] audit: initializing netlink socket (disabled) Mar 28 14:13:29 stt300 kernel: [ 1.140070] type=2000 audit(1332936794.136:1): initialized Mar 28 14:13:29 stt300 kernel: [ 1.167821] highmem bounce pool size: 64 pages Mar 28 14:13:29 stt300 kernel: [ 1.167833] HugeTLB registered 2 MB page size, pre-allocated 0 pages Mar 28 14:13:29 stt300 kernel: [ 1.168827] VFS: Disk quotas dquot_6.5.2 Mar 28 14:13:29 stt300 kernel: [ 1.168924] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Mar 28 14:13:29 stt300 kernel: [ 1.169106] msgmni has been set to 1727 Mar 28 14:13:29 stt300 kernel: [ 1.169581] alg: No test for stdrng (krng) Mar 28 14:13:29 stt300 kernel: [ 1.169679] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) Mar 28 14:13:29 stt300 kernel: [ 1.169686] io scheduler noop registered Mar 28 14:13:29 stt300 kernel: [ 1.169690] io scheduler deadline registered Mar 28 14:13:29 stt300 kernel: [ 1.169731] io scheduler cfq registered (default) Mar 28 14:13:29 stt300 kernel: [ 1.170383] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 Mar 28 14:13:29 stt300 kernel: [ 1.170441] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 Mar 28 14:13:29 stt300 kernel: [ 1.170446] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 Mar 28 14:13:29 stt300 kernel: [ 1.171183] Marking TSC unstable due to TSC halts in idle states deeper than C2 Mar 28 14:13:29 stt300 kernel: [ 1.171274] GHES: HEST is not enabled! Mar 28 14:13:29 stt300 kernel: [ 1.171308] isapnp: Scanning for PnP cards... Mar 28 14:13:29 stt300 kernel: [ 1.525088] isapnp: No Plug & Play device found Mar 28 14:13:29 stt300 kernel: [ 1.525268] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled Mar 28 14:13:29 stt300 kernel: [ 1.526476] Linux agpgart interface v0.103 Mar 28 14:13:29 stt300 kernel: [ 1.526695] agpgart-intel 0000:00:00.0: Intel GMA3150 Chipset Mar 28 14:13:29 stt300 kernel: [ 1.526902] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable Mar 28 14:13:29 stt300 kernel: [ 1.527160] agpgart-intel 0000:00:00.0: detected 8192K stolen memory Mar 28 14:13:29 stt300 kernel: [ 1.527416] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x80000000 Mar 28 14:13:29 stt300 kernel: [ 1.527755] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12 Mar 28 14:13:29 stt300 kernel: [ 1.533070] serio: i8042 KBD port at 0x60,0x64 irq 1 Mar 28 14:13:29 stt300 kernel: [ 1.533086] serio: i8042 AUX port at 0x60,0x64 irq 12 Mar 28 14:13:29 stt300 kernel: [ 1.533463] mousedev: PS/2 mouse device common for all mice Mar 28 14:13:29 stt300 kernel: [ 1.533564] rtc_cmos 00:03: RTC can wake from S4 Mar 28 14:13:29 stt300 kernel: [ 1.533768] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 Mar 28 14:13:29 stt300 kernel: [ 1.533808] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs Mar 28 14:13:29 stt300 kernel: [ 1.533930] cpuidle: using governor ladder Mar 28 14:13:29 stt300 kernel: [ 1.534071] cpuidle: using governor menu Mar 28 14:13:29 stt300 kernel: [ 1.534638] TCP cubic registered Mar 28 14:13:29 stt300 kernel: [ 1.534766] NET: Registered protocol family 10 Mar 28 14:13:29 stt300 kernel: [ 1.536048] Mobile IPv6 Mar 28 14:13:29 stt300 kernel: [ 1.536055] NET: Registered protocol family 17 Mar 28 14:13:29 stt300 kernel: [ 1.536067] Registering the dns_resolver key type Mar 28 14:13:29 stt300 kernel: [ 1.536123] Using IPI No-Shortcut mode Mar 28 14:13:29 stt300 kernel: [ 1.536483] registered taskstats version 1 Mar 28 14:13:29 stt300 kernel: [ 1.537467] rtc_cmos 00:03: setting system clock to 2012-03-28 12:13:15 UTC (1332936795) Mar 28 14:13:29 stt300 kernel: [ 1.537608] Initializing network drop monitor service Mar 28 14:13:29 stt300 kernel: [ 1.537851] Freeing unused kernel memory: 404k freed Mar 28 14:13:29 stt300 kernel: [ 1.538217] Write protecting the kernel text: 2824k Mar 28 14:13:29 stt300 kernel: [ 1.538298] Write protecting the kernel read-only data: 1060k Mar 28 14:13:29 stt300 kernel: [ 1.538304] NX-protecting the kernel data: 3320k Mar 28 14:13:29 stt300 kernel: [ 1.658232] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 Mar 28 14:13:29 stt300 kernel: [ 1.703761] ACPI Warning: For \_TZ_.THRM._AL0: Return Package has no elements (empty) (20120111/nspredef-463) Mar 28 14:13:29 stt300 kernel: [ 1.703866] ACPI: Invalid active0 threshold Mar 28 14:13:29 stt300 kernel: [ 1.715637] thermal LNXTHERM:00: registered as thermal_zone0 Mar 28 14:13:29 stt300 kernel: [ 1.715647] ACPI: Thermal Zone [THRM] (32 C) Mar 28 14:13:29 stt300 kernel: [ 1.741829] SCSI subsystem initialized Mar 28 14:13:29 stt300 kernel: [ 1.755943] ahci: SSS flag set, parallel bus scan disabled Mar 28 14:13:29 stt300 kernel: [ 1.756085] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0x3 impl SATA mode Mar 28 14:13:29 stt300 kernel: [ 1.756099] ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pmp pio slum part Mar 28 14:13:29 stt300 kernel: [ 1.758340] scsi0 : ahci Mar 28 14:13:29 stt300 kernel: [ 1.758716] scsi1 : ahci Mar 28 14:13:29 stt300 kernel: [ 1.759009] scsi2 : ahci Mar 28 14:13:29 stt300 kernel: [ 1.759309] scsi3 : ahci Mar 28 14:13:29 stt300 kernel: [ 1.760157] ata1: SATA max UDMA/133 abar m1024@0x94204000 port 0x94204100 irq 42 Mar 28 14:13:29 stt300 kernel: [ 1.760170] ata2: SATA max UDMA/133 abar m1024@0x94204000 port 0x94204180 irq 42 Mar 28 14:13:29 stt300 kernel: [ 1.760179] ata3: DUMMY Mar 28 14:13:29 stt300 kernel: [ 1.760184] ata4: DUMMY Mar 28 14:13:29 stt300 kernel: [ 2.252139] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Mar 28 14:13:29 stt300 kernel: [ 2.253053] ata1.00: unexpected _GTF length (4) Mar 28 14:13:29 stt300 kernel: [ 2.309561] ata1.00: ATA-8: ST9250315AS, 0001SDM1, max UDMA/133 Mar 28 14:13:29 stt300 kernel: [ 2.309573] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32) Mar 28 14:13:29 stt300 kernel: [ 2.311383] ata1.00: unexpected _GTF length (4) Mar 28 14:13:29 stt300 kernel: [ 2.311744] ata1.00: configured for UDMA/133 Mar 28 14:13:29 stt300 kernel: [ 2.312039] scsi 0:0:0:0: Direct-Access ATA ST9250315AS 0001 PQ: 0 ANSI: 5 Mar 28 14:13:29 stt300 kernel: [ 2.632150] ata2: SATA link down (SStatus 0 SControl 300) Mar 28 14:13:29 stt300 kernel: [ 2.643398] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB) Mar 28 14:13:29 stt300 kernel: [ 2.643640] sd 0:0:0:0: [sda] Write Protect is off Mar 28 14:13:29 stt300 kernel: [ 2.643746] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Mar 28 14:13:29 stt300 kernel: [ 2.764077] sda: sda1 sda2 Mar 28 14:13:29 stt300 kernel: [ 2.765106] sd 0:0:0:0: [sda] Attached SCSI disk Mar 28 14:13:29 stt300 kernel: [ 3.134306] PM: Starting manual resume from disk Mar 28 14:13:29 stt300 kernel: [ 3.143020] REISERFS (device sda2): found reiserfs format "3.6" with standard journal Mar 28 14:13:29 stt300 kernel: [ 3.143058] REISERFS (device sda2): using ordered data mode Mar 28 14:13:29 stt300 kernel: [ 3.143063] reiserfs: using flush barriers Mar 28 14:13:29 stt300 kernel: [ 3.156531] REISERFS (device sda2): journal params: device sda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 Mar 28 14:13:29 stt300 kernel: [ 3.157109] REISERFS (device sda2): checking transaction log (sda2) Mar 28 14:13:29 stt300 kernel: [ 3.238555] REISERFS (device sda2): Using r5 hash to sort names Mar 28 14:13:29 stt300 kernel: [ 6.804096] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 Mar 28 14:13:29 stt300 kernel: [ 6.804114] ACPI: Power Button [PWRB] Mar 28 14:13:29 stt300 kernel: [ 6.804353] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2 Mar 28 14:13:29 stt300 kernel: [ 6.807528] ACPI: Lid Switch [LID0] Mar 28 14:13:29 stt300 kernel: [ 6.808405] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 Mar 28 14:13:29 stt300 kernel: [ 6.808422] ACPI: Power Button [PWRF] Mar 28 14:13:29 stt300 kernel: [ 6.815961] ACPI: AC Adapter [AC] (on-line) Mar 28 14:13:29 stt300 kernel: [ 6.871301] [drm] Initialized drm 1.1.0 20060810 Mar 28 14:13:29 stt300 kernel: [ 6.897908] ACPI: Battery Slot [BAT0] (battery present) Mar 28 14:13:29 stt300 kernel: [ 6.898632] wmi: Mapper loaded Mar 28 14:13:29 stt300 kernel: [ 6.940917] i915 0000:00:02.0: power state changed by ACPI to D0 Mar 28 14:13:29 stt300 kernel: [ 6.940935] i915 0000:00:02.0: power state changed by ACPI to D0 Mar 28 14:13:29 stt300 kernel: [ 6.944889] bcma: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x24, class 0x0) Mar 28 14:13:29 stt300 kernel: [ 6.944926] bcma: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x18, class 0x0) Mar 28 14:13:29 stt300 kernel: [ 6.944992] bcma: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x11, class 0x0) Mar 28 14:13:29 stt300 kernel: [ 6.964858] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded Mar 28 14:13:29 stt300 kernel: [ 6.964970] r8169 0000:01:00.0: (unregistered net_device): unknown MAC, using family default Mar 28 14:13:29 stt300 kernel: [ 6.966766] r8169 0000:01:00.0: eth0: RTL8101e at 0xf84fa000, 68:b5:99:d3:c1:d8, XID 04000000 IRQ 43 Mar 28 14:13:29 stt300 kernel: [ 7.000646] rts_pstor: module is from the staging directory, the quality is unknown, you have been warned. Mar 28 14:13:29 stt300 kernel: [ 7.003148] Initializing Realtek PCIE storage driver... Mar 28 14:13:29 stt300 kernel: [ 7.004473] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). Mar 28 14:13:29 stt300 kernel: [ 7.004480] [drm] Driver supports precise vblank timestamp query. Mar 28 14:13:29 stt300 kernel: [ 7.004591] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem Mar 28 14:13:29 stt300 kernel: [ 7.030335] bcma: Bus registered Mar 28 14:13:29 stt300 kernel: [ 7.054309] iTCO_vendor_support: vendor-support=0 Mar 28 14:13:29 stt300 kernel: [ 7.056529] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07 Mar 28 14:13:29 stt300 kernel: [ 7.056764] iTCO_wdt: Found a NM10 TCO device (Version=2, TCOBASE=0x0460) Mar 28 14:13:29 stt300 kernel: [ 7.056903] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) Mar 28 14:13:29 stt300 kernel: [ 7.061284] Resource length: 0x10000 Mar 28 14:13:29 stt300 kernel: [ 7.061348] Original address: 0x93000000, remapped address: 0xf8660000 Mar 28 14:13:29 stt300 kernel: [ 7.061361] pci->irq = 17 Mar 28 14:13:29 stt300 kernel: [ 7.061368] rtsx_acquire_irq: chip->msi_en = 0, pci->irq = 17 Mar 28 14:13:29 stt300 kernel: [ 7.092738] input: PC Speaker as /devices/platform/pcspkr/input/input4 Mar 28 14:13:29 stt300 kernel: [ 7.152302] usbcore: registered new interface driver usbfs Mar 28 14:13:29 stt300 kernel: [ 7.152380] usbcore: registered new interface driver hub Mar 28 14:13:29 stt300 kernel: [ 7.158844] usbcore: registered new device driver usb Mar 28 14:13:29 stt300 kernel: [ 7.230895] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver Mar 28 14:13:29 stt300 kernel: [ 7.261022] scsi4 : SCSI emulation for PCI-Express Mass Storage devices Mar 28 14:13:29 stt300 kernel: [ 7.261518] rts_pstor: waiting for device to settle before scanning Mar 28 14:13:29 stt300 kernel: [ 7.293735] cfg80211: Calling CRDA to update world regulatory domain Mar 28 14:13:29 stt300 kernel: [ 7.346397] uhci_hcd: USB Universal Host Controller Interface driver Mar 28 14:13:29 stt300 kernel: [ 7.361883] [drm] initialized overlay support Mar 28 14:13:29 stt300 kernel: [ 7.376568] input: HP WMI hotkeys as /devices/virtual/input/input5 Mar 28 14:13:29 stt300 kernel: [ 7.384538] fbcon: inteldrmfb (fb0) is primary device Mar 28 14:13:29 stt300 kernel: [ 7.447192] brcmsmac bcma0:0: mfg 4bf core 812 rev 24 class 0 irq 17 Mar 28 14:13:29 stt300 kernel: [ 7.772088] Console: switching to colour frame buffer device 128x37 Mar 28 14:13:29 stt300 kernel: [ 7.779675] fb0: inteldrmfb frame buffer device Mar 28 14:13:29 stt300 kernel: [ 7.779680] drm: registered panic notifier Mar 28 14:13:29 stt300 kernel: [ 7.783875] acpi device:21: registered as cooling_device2 Mar 28 14:13:29 stt300 kernel: [ 7.785008] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input6 Mar 28 14:13:29 stt300 kernel: [ 7.785193] ACPI: Video Device [OVGA] (multi-head: yes rom: no post: no) Mar 28 14:13:29 stt300 kernel: [ 7.785325] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 Mar 28 14:13:29 stt300 kernel: [ 7.787588] ehci_hcd 0000:00:1d.7: EHCI Host Controller Mar 28 14:13:29 stt300 kernel: [ 7.787670] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 Mar 28 14:13:29 stt300 kernel: [ 7.787730] ehci_hcd 0000:00:1d.7: using broken periodic workaround Mar 28 14:13:29 stt300 kernel: [ 7.787754] ehci_hcd 0000:00:1d.7: debug port 1 Mar 28 14:13:29 stt300 kernel: [ 7.791738] ehci_hcd 0000:00:1d.7: irq 16, io mem 0x94204400 Mar 28 14:13:29 stt300 kernel: [ 7.801532] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 Mar 28 14:13:29 stt300 kernel: [ 7.801601] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 Mar 28 14:13:29 stt300 kernel: [ 7.801611] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Mar 28 14:13:29 stt300 kernel: [ 7.801620] usb usb1: Product: EHCI Host Controller Mar 28 14:13:29 stt300 kernel: [ 7.801627] usb usb1: Manufacturer: Linux 3.3.0 ehci_hcd Mar 28 14:13:29 stt300 kernel: [ 7.801634] usb usb1: SerialNumber: 0000:00:1d.7 Mar 28 14:13:29 stt300 kernel: [ 7.802394] hub 1-0:1.0: USB hub found Mar 28 14:13:29 stt300 kernel: [ 7.802414] hub 1-0:1.0: 8 ports detected Mar 28 14:13:29 stt300 kernel: [ 7.802918] uhci_hcd 0000:00:1d.0: UHCI Host Controller Mar 28 14:13:29 stt300 kernel: [ 7.802953] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 Mar 28 14:13:29 stt300 kernel: [ 7.803008] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00003080 Mar 28 14:13:29 stt300 kernel: [ 7.803127] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 Mar 28 14:13:29 stt300 kernel: [ 7.803136] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Mar 28 14:13:29 stt300 kernel: [ 7.803144] usb usb2: Product: UHCI Host Controller Mar 28 14:13:29 stt300 kernel: [ 7.803151] usb usb2: Manufacturer: Linux 3.3.0 uhci_hcd Mar 28 14:13:29 stt300 kernel: [ 7.803157] usb usb2: SerialNumber: 0000:00:1d.0 Mar 28 14:13:29 stt300 kernel: [ 7.803632] hub 2-0:1.0: USB hub found Mar 28 14:13:29 stt300 kernel: [ 7.803650] hub 2-0:1.0: 2 ports detected Mar 28 14:13:29 stt300 kernel: [ 7.803920] uhci_hcd 0000:00:1d.1: UHCI Host Controller Mar 28 14:13:29 stt300 kernel: [ 7.803949] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 Mar 28 14:13:29 stt300 kernel: [ 7.804063] uhci_hcd 0000:00:1d.1: irq 18, io base 0x00003060 Mar 28 14:13:29 stt300 kernel: [ 7.804180] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 Mar 28 14:13:29 stt300 kernel: [ 7.804190] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Mar 28 14:13:29 stt300 kernel: [ 7.804199] usb usb3: Product: UHCI Host Controller Mar 28 14:13:29 stt300 kernel: [ 7.804207] usb usb3: Manufacturer: Linux 3.3.0 uhci_hcd Mar 28 14:13:29 stt300 kernel: [ 7.804214] usb usb3: SerialNumber: 0000:00:1d.1 Mar 28 14:13:29 stt300 kernel: [ 7.804607] hub 3-0:1.0: USB hub found Mar 28 14:13:29 stt300 kernel: [ 7.804625] hub 3-0:1.0: 2 ports detected Mar 28 14:13:29 stt300 kernel: [ 7.804915] uhci_hcd 0000:00:1d.2: UHCI Host Controller Mar 28 14:13:29 stt300 kernel: [ 7.804948] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 Mar 28 14:13:29 stt300 kernel: [ 7.805002] uhci_hcd 0000:00:1d.2: irq 17, io base 0x00003040 Mar 28 14:13:29 stt300 kernel: [ 7.805116] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 Mar 28 14:13:29 stt300 kernel: [ 7.805125] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Mar 28 14:13:29 stt300 kernel: [ 7.805133] usb usb4: Product: UHCI Host Controller Mar 28 14:13:29 stt300 kernel: [ 7.805140] usb usb4: Manufacturer: Linux 3.3.0 uhci_hcd Mar 28 14:13:29 stt300 kernel: [ 7.805147] usb usb4: SerialNumber: 0000:00:1d.2 Mar 28 14:13:29 stt300 kernel: [ 7.805554] hub 4-0:1.0: USB hub found Mar 28 14:13:29 stt300 kernel: [ 7.805573] hub 4-0:1.0: 2 ports detected Mar 28 14:13:29 stt300 kernel: [ 7.805847] uhci_hcd 0000:00:1d.3: UHCI Host Controller Mar 28 14:13:29 stt300 kernel: [ 7.805877] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 Mar 28 14:13:29 stt300 kernel: [ 7.805961] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00003020 Mar 28 14:13:29 stt300 kernel: [ 7.806075] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 Mar 28 14:13:29 stt300 kernel: [ 7.806085] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Mar 28 14:13:29 stt300 kernel: [ 7.806094] usb usb5: Product: UHCI Host Controller Mar 28 14:13:29 stt300 kernel: [ 7.806101] usb usb5: Manufacturer: Linux 3.3.0 uhci_hcd Mar 28 14:13:29 stt300 kernel: [ 7.806108] usb usb5: SerialNumber: 0000:00:1d.3 Mar 28 14:13:29 stt300 kernel: [ 7.806497] hub 5-0:1.0: USB hub found Mar 28 14:13:29 stt300 kernel: [ 7.806515] hub 5-0:1.0: 2 ports detected Mar 28 14:13:29 stt300 kernel: [ 7.904235] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.4, id: 0x1e0b1, caps: 0xd04773/0xa40000/0xa0400 Mar 28 14:13:29 stt300 kernel: [ 7.950899] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7 Mar 28 14:13:29 stt300 kernel: [ 7.990888] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8 Mar 28 14:13:29 stt300 kernel: [ 8.004516] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 Mar 28 14:13:29 stt300 kernel: [ 8.005066] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 Mar 28 14:13:29 stt300 kernel: [ 8.112106] usb 1-8: new high-speed USB device number 2 using ehci_hcd Mar 28 14:13:29 stt300 kernel: [ 8.260168] rts_pstor: device scan complete Mar 28 14:13:29 stt300 kernel: [ 8.260386] scsi 4:0:0:0: Direct-Access Generic- xD/SD/M.S. 1.00 PQ: 0 ANSI: 0 CCS Mar 28 14:13:29 stt300 kernel: [ 8.263042] sd 4:0:0:0: [sdb] Attached SCSI removable disk Mar 28 14:13:29 stt300 kernel: [ 8.314707] usb 1-8: New USB device found, idVendor=174f, idProduct=1122 Mar 28 14:13:29 stt300 kernel: [ 8.314721] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Mar 28 14:13:29 stt300 kernel: [ 8.314732] usb 1-8: Product: HP Webcam Mar 28 14:13:29 stt300 kernel: [ 8.314740] usb 1-8: Manufacturer: D-MAX Mar 28 14:13:29 stt300 kernel: [ 8.314747] usb 1-8: SerialNumber: 00 Mar 28 14:13:29 stt300 kernel: [ 8.812207] Linux media interface: v0.10 Mar 28 14:13:29 stt300 kernel: [ 8.828374] Linux video capture interface: v2.00 Mar 28 14:13:29 stt300 kernel: [ 8.844130] uvcvideo: Found UVC 1.00 device HP Webcam (174f:1122) Mar 28 14:13:29 stt300 kernel: [ 8.857732] input: HP Webcam as /devices/pci0000:00/0000:00:1d.7/usb1/1-8/1-8:1.0/input/input11 Mar 28 14:13:29 stt300 kernel: [ 8.858063] usbcore: registered new interface driver uvcvideo Mar 28 14:13:29 stt300 kernel: [ 8.858071] USB Video Class driver (1.1.1) Mar 28 14:13:29 stt300 kernel: [ 9.045348] cfg80211: World regulatory domain updated: Mar 28 14:13:29 stt300 kernel: [ 9.045359] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) Mar 28 14:13:29 stt300 kernel: [ 9.045370] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Mar 28 14:13:29 stt300 kernel: [ 9.045379] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) Mar 28 14:13:29 stt300 kernel: [ 9.045389] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) Mar 28 14:13:29 stt300 kernel: [ 9.045398] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Mar 28 14:13:29 stt300 kernel: [ 9.045408] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Mar 28 14:13:29 stt300 kernel: [ 9.045441] cfg80211: Calling CRDA for country: US Mar 28 14:13:29 stt300 kernel: [ 9.059851] cfg80211: Regulatory domain changed to country: US Mar 28 14:13:29 stt300 kernel: [ 9.059859] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) Mar 28 14:13:29 stt300 kernel: [ 9.059867] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) Mar 28 14:13:29 stt300 kernel: [ 9.059873] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) Mar 28 14:13:29 stt300 kernel: [ 9.059880] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Mar 28 14:13:29 stt300 kernel: [ 9.059886] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Mar 28 14:13:29 stt300 kernel: [ 9.059892] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Mar 28 14:13:29 stt300 kernel: [ 9.059898] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) Mar 28 14:13:29 stt300 kernel: [ 9.059926] cfg80211: Calling CRDA for country: ES Mar 28 14:13:29 stt300 kernel: [ 9.073259] cfg80211: Regulatory domain changed to country: ES Mar 28 14:13:29 stt300 kernel: [ 9.073266] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) Mar 28 14:13:29 stt300 kernel: [ 9.073273] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) Mar 28 14:13:29 stt300 kernel: [ 9.073279] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) Mar 28 14:13:29 stt300 kernel: [ 9.073285] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) Mar 28 14:13:29 stt300 kernel: [ 9.073291] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm) Mar 28 14:13:29 stt300 kernel: [ 10.998936] Adding 3905532k swap on /dev/sda1. Priority:-1 extents:1 across:3905532k Mar 28 14:13:29 stt300 kernel: [ 11.195212] reiserfs: enabling write barrier flush mode Mar 28 14:13:29 stt300 kernel: [ 11.531866] loop: module loaded Mar 28 14:13:29 stt300 kernel: [ 14.499356] fuse init (API version 7.18) Mar 28 14:13:32 stt300 kernel: [ 18.596012] r8169 0000:01:00.0: eth0: link down Mar 28 14:13:32 stt300 kernel: [ 18.596533] ADDRCONF(NETDEV_UP): eth0: link is not ready Mar 28 14:13:32 stt300 kernel: [ 18.657938] ADDRCONF(NETDEV_UP): wlan0: link is not ready Mar 28 14:13:35 stt300 kernel: [ 21.904111] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input12 Mar 28 14:13:40 stt300 kernel: [ 26.341167] lp: driver loaded but no devices found Mar 28 14:13:40 stt300 kernel: [ 26.480787] ppdev: user-space parallel port driver Mar 28 14:14:25 stt300 kernel: [ 71.100194] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready Mar 28 14:18:51 stt300 rsyslogd: [origin software="rsyslogd" swVersion="5.8.9" x-pid="1055" x-info="http://www.rsyslog.com";] rsyslogd was HUPed Mar 28 15:03:43 stt300 kernel: [ 3029.364062] ------------[ cut here ]------------ Mar 28 15:03:43 stt300 kernel: [ 3029.364125] WARNING: at drivers/net/wireless/brcm80211/brcmsmac/main.c:7998 brcms_c_wait_for_tx_completion+0x73/0x7d [brcmsmac]() Mar 28 15:03:43 stt300 kernel: [ 3029.364137] Hardware name: Compaq Mini CQ10-500 Mar 28 15:03:43 stt300 kernel: [ 3029.364144] Modules linked in: acpi_cpufreq mperf cpufreq_powersave cpufreq_stats cpufreq_userspace cpufreq_conservative parport_pc ppdev lp parport binfmt_misc uinput fuse loop uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_core videodev media arc4 joydev snd_hda_codec_idt snd_hda_intel brcmsmac hp_wmi cordic crc8 sparse_keymap brcmutil snd_hda_codec uhci_hcd snd_hwdep mac80211 cfg80211 rfkill ehci_hcd snd_pcm snd_page_alloc usbcore snd_seq snd_seq_device snd_timer i2c_i801 psmouse evdev serio_raw pcspkr iTCO_wdt iTCO_vendor_support rts_pstor(C) r8169 usb_common bcma i915 snd drm_kms_helper mii drm wmi battery i2c_algo_bit soundcore i2c_core video ac button power_supply processor reiserfs sd_mod crc_t10dif ahci libahci libata scsi_mod thermal thermal_sys Mar 28 15:03:43 stt300 kernel: [ 3029.364341] Pid: 2363, comm: kworker/u:1 Tainted: G C 3.3.0 #2 Mar 28 15:03:43 stt300 kernel: [ 3029.364348] Call Trace: Mar 28 15:03:43 stt300 kernel: [ 3029.364370] [<c102bbee>] ? warn_slowpath_common+0x68/0x79 Mar 28 15:03:43 stt300 kernel: [ 3029.364410] [<f8b61b9d>] ? brcms_c_wait_for_tx_completion+0x73/0x7d [brcmsmac] Mar 28 15:03:43 stt300 kernel: [ 3029.364424] [<c102bc0c>] ? warn_slowpath_null+0xd/0x10 Mar 28 15:03:43 stt300 kernel: [ 3029.364462] [<f8b61b9d>] ? brcms_c_wait_for_tx_completion+0x73/0x7d [brcmsmac] Mar 28 15:03:43 stt300 kernel: [ 3029.364495] [<f8b59131>] ? brcms_ops_flush+0x1f/0x29 [brcmsmac] Mar 28 15:03:43 stt300 kernel: [ 3029.364541] [<f877a5b3>] ? ieee80211_scan_work+0x382/0x3ee [mac80211] Mar 28 15:03:43 stt300 kernel: [ 3029.364557] [<c103d823>] ? process_one_work+0x112/0x1fa Mar 28 15:03:43 stt300 kernel: [ 3029.364601] [<f877a231>] ? ieee80211_scan_rx+0x149/0x149 [mac80211] Mar 28 15:03:43 stt300 kernel: [ 3029.364615] [<c103e08c>] ? worker_thread+0xa9/0x122 Mar 28 15:03:43 stt300 kernel: [ 3029.364628] [<c103dfe3>] ? manage_workers.isra.23+0x13d/0x13d Mar 28 15:03:43 stt300 kernel: [ 3029.364640] [<c1040ab8>] ? kthread+0x68/0x6d Mar 28 15:03:43 stt300 kernel: [ 3029.364653] [<c1040a50>] ? kthread_freezable_should_stop+0x37/0x37 Mar 28 15:03:43 stt300 kernel: [ 3029.364668] [<c12c0b3e>] ? kernel_thread_helper+0x6/0x10 Mar 28 15:03:43 stt300 kernel: [ 3029.364677] ---[ end trace f3eab369a98dc4f7 ]--- Mar 28 15:03:46 stt300 kernel: [ 3032.078511] cfg80211: Calling CRDA to update world regulatory domain Mar 28 15:03:46 stt300 kernel: [ 3032.101014] cfg80211: World regulatory domain updated: Mar 28 15:03:46 stt300 kernel: [ 3032.101022] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) Mar 28 15:03:46 stt300 kernel: [ 3032.101030] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Mar 28 15:03:46 stt300 kernel: [ 3032.101037] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) Mar 28 15:03:46 stt300 kernel: [ 3032.101043] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) Mar 28 15:03:46 stt300 kernel: [ 3032.101049] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Mar 28 15:03:46 stt300 kernel: [ 3032.101056] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Mar 28 15:03:46 stt300 kernel: [ 3032.101079] cfg80211: Calling CRDA for country: ES Mar 28 15:03:46 stt300 kernel: [ 3032.114878] cfg80211: Regulatory domain changed to country: ES Mar 28 15:03:46 stt300 kernel: [ 3032.114887] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) Mar 28 15:03:46 stt300 kernel: [ 3032.114896] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) Mar 28 15:03:46 stt300 kernel: [ 3032.114904] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) Mar 28 15:03:46 stt300 kernel: [ 3032.114911] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) Mar 28 15:03:46 stt300 kernel: [ 3032.114918] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm) Mar 28 15:07:18 stt300 kernel: [ 3244.504955] cfg80211: Calling CRDA to update world regulatory domain Mar 28 15:07:18 stt300 kernel: [ 3244.525448] cfg80211: World regulatory domain updated: Mar 28 15:07:18 stt300 kernel: [ 3244.525456] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) Mar 28 15:07:18 stt300 kernel: [ 3244.525464] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Mar 28 15:07:18 stt300 kernel: [ 3244.525470] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) Mar 28 15:07:18 stt300 kernel: [ 3244.525477] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) Mar 28 15:07:18 stt300 kernel: [ 3244.525483] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Mar 28 15:07:18 stt300 kernel: [ 3244.525489] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Mar 28 15:07:18 stt300 kernel: [ 3244.525512] cfg80211: Calling CRDA for country: ES Mar 28 15:07:18 stt300 kernel: [ 3244.539661] cfg80211: Regulatory domain changed to country: ES Mar 28 15:07:18 stt300 kernel: [ 3244.539670] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) Mar 28 15:07:18 stt300 kernel: [ 3244.539679] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) Mar 28 15:07:18 stt300 kernel: [ 3244.539687] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) Mar 28 15:07:18 stt300 kernel: [ 3244.539694] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) Mar 28 15:07:18 stt300 kernel: [ 3244.539702] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm) Mar 28 15:07:46 stt300 kernel: [ 3272.079805] cfg80211: Calling CRDA to update world regulatory domain Mar 28 15:07:46 stt300 kernel: [ 3272.101457] cfg80211: World regulatory domain updated: Mar 28 15:07:46 stt300 kernel: [ 3272.101465] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) Mar 28 15:07:46 stt300 kernel: [ 3272.101473] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Mar 28 15:07:46 stt300 kernel: [ 3272.101479] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) Mar 28 15:07:46 stt300 kernel: [ 3272.101486] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) Mar 28 15:07:46 stt300 kernel: [ 3272.101492] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Mar 28 15:07:46 stt300 kernel: [ 3272.101499] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Mar 28 15:07:46 stt300 kernel: [ 3272.101522] cfg80211: Calling CRDA for country: ES Mar 28 15:07:46 stt300 kernel: [ 3272.115401] cfg80211: Regulatory domain changed to country: ES Mar 28 15:07:46 stt300 kernel: [ 3272.115411] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) Mar 28 15:07:46 stt300 kernel: [ 3272.115420] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) Mar 28 15:07:46 stt300 kernel: [ 3272.115427] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) Mar 28 15:07:46 stt300 kernel: [ 3272.115435] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) Mar 28 15:07:46 stt300 kernel: [ 3272.115442] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm) Mar 28 15:08:01 stt300 kernel: [ 3287.364947] cfg80211: Calling CRDA to update world regulatory domain Mar 28 15:08:01 stt300 kernel: [ 3287.393210] cfg80211: World regulatory domain updated: Mar 28 15:08:01 stt300 kernel: [ 3287.393223] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) Mar 28 15:08:01 stt300 kernel: [ 3287.393234] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Mar 28 15:08:01 stt300 kernel: [ 3287.393244] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) Mar 28 15:08:01 stt300 kernel: [ 3287.393253] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) Mar 28 15:08:01 stt300 kernel: [ 3287.393263] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Mar 28 15:08:01 stt300 kernel: [ 3287.393272] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Mar 28 15:08:01 stt300 kernel: [ 3287.393308] cfg80211: Calling CRDA for country: ES Mar 28 15:08:01 stt300 kernel: [ 3287.427481] cfg80211: Regulatory domain changed to country: ES Mar 28 15:08:01 stt300 kernel: [ 3287.427492] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) Mar 28 15:08:01 stt300 kernel: [ 3287.427502] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) Mar 28 15:08:01 stt300 kernel: [ 3287.427510] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) Mar 28 15:08:01 stt300 kernel: [ 3287.427519] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) Mar 28 15:08:01 stt300 kernel: [ 3287.427528] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm) Mar 28 23:40:59 stt300 kernel: [34065.589505] cfg80211: Calling CRDA to update world regulatory domain Mar 28 23:40:59 stt300 kernel: [34065.611277] cfg80211: World regulatory domain updated: Mar 28 23:40:59 stt300 kernel: [34065.611289] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) Mar 28 23:40:59 stt300 kernel: [34065.611302] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Mar 28 23:40:59 stt300 kernel: [34065.611313] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) Mar 28 23:40:59 stt300 kernel: [34065.611323] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) Mar 28 23:40:59 stt300 kernel: [34065.611334] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Mar 28 23:40:59 stt300 kernel: [34065.611344] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Mar 28 23:40:59 stt300 kernel: [34065.611382] cfg80211: Calling CRDA for country: ES Mar 28 23:40:59 stt300 kernel: [34065.625345] cfg80211: Regulatory domain changed to country: ES Mar 28 23:40:59 stt300 kernel: [34065.625354] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) Mar 28 23:40:59 stt300 kernel: [34065.625363] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) Mar 28 23:40:59 stt300 kernel: [34065.625370] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) Mar 28 23:40:59 stt300 kernel: [34065.625378] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) Mar 28 23:40:59 stt300 kernel: [34065.625385] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
