2012/3/24 Arend van Spriel <arend@xxxxxxxxxxxx>: > On 03/24/2012 09:55 AM, Camaleón wrote: >> >> How to reproduce the problem: >> After booting the system, I get a trace (see attached file "messages.txt") >> > > Hi Camaleón, > > From the trace I see that your system apparently is setup for regulatory > domain EU. Could you configure it US instead. Sure. I have edited "/etc/default/crda" and set there the default settings (US), see attached logs. The trace has disappeared from "messages" log :-) Is it fine to have this default while I'm located in Europe (Spain)? Wireless seems to be working fine but I don't know if there should be any drawbacks. > I think brcmsmac is not handling the channel 12 and 13 properly. Is you AP on either of > these channels? Regardless, mac80211 will probably switch to those channels for > (passive) scanning. The AP is configured for channel 06 (2437 MHz.), this shouldn't be a issue. I will keep and eye on this, bu all seems good and working fine now. Thanks! -- Camaleón
Mar 24 10:46:36 stt300 kernel: imklog 5.8.6, log source = /proc/kmsg started. Mar 24 10:46:36 stt300 rsyslogd: [origin software="rsyslogd" swVersion="5.8.6" x-pid="1054" x-info="http://www.rsyslog.com";] start Mar 24 10:46:36 stt300 kernel: [ 0.000000] Initializing cgroup subsys cpuset Mar 24 10:46:36 stt300 kernel: [ 0.000000] Initializing cgroup subsys cpu Mar 24 10:46:36 stt300 kernel: [ 0.000000] Linux version 3.3.0 (root@stt300) (gcc version 4.6.3 (Debian 4.6.3-1) ) #1 SMP Fri Mar 23 16:27:23 CET 2012 Mar 24 10:46:36 stt300 kernel: [ 0.000000] Disabled fast string operations Mar 24 10:46:36 stt300 kernel: [ 0.000000] BIOS-provided physical RAM map: Mar 24 10:46:36 stt300 kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) Mar 24 10:46:36 stt300 kernel: [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) Mar 24 10:46:36 stt300 kernel: [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) Mar 24 10:46:36 stt300 kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 000000007f43f000 (usable) Mar 24 10:46:36 stt300 kernel: [ 0.000000] BIOS-e820: 000000007f43f000 - 000000007f4bf000 (reserved) Mar 24 10:46:36 stt300 kernel: [ 0.000000] BIOS-e820: 000000007f4bf000 - 000000007f5bf000 (ACPI NVS) Mar 24 10:46:36 stt300 kernel: [ 0.000000] BIOS-e820: 000000007f5bf000 - 000000007f5f7000 (ACPI data) Mar 24 10:46:36 stt300 kernel: [ 0.000000] BIOS-e820: 000000007f5f7000 - 000000007f600000 (usable) Mar 24 10:46:36 stt300 kernel: [ 0.000000] BIOS-e820: 000000007f600000 - 0000000080000000 (reserved) Mar 24 10:46:36 stt300 kernel: [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) Mar 24 10:46:36 stt300 kernel: [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) Mar 24 10:46:36 stt300 kernel: [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) Mar 24 10:46:36 stt300 kernel: [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved) Mar 24 10:46:36 stt300 kernel: [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) Mar 24 10:46:36 stt300 kernel: [ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved) Mar 24 10:46:36 stt300 kernel: [ 0.000000] NX (Execute Disable) protection: active Mar 24 10:46:36 stt300 kernel: [ 0.000000] DMI 2.6 present. Mar 24 10:46:36 stt300 kernel: [ 0.000000] last_pfn = 0x7f600 max_arch_pfn = 0x1000000 Mar 24 10:46:36 stt300 kernel: [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 Mar 24 10:46:36 stt300 kernel: [ 0.000000] init_memory_mapping: 0000000000000000-00000000379fe000 Mar 24 10:46:36 stt300 kernel: [ 0.000000] RAMDISK: 37b72000 - 37db1000 Mar 24 10:46:36 stt300 kernel: [ 0.000000] Allocated new RAMDISK: 377bf000 - 379fd9b2 Mar 24 10:46:36 stt300 kernel: [ 0.000000] Move RAMDISK from 0000000037b72000 - 0000000037db09b1 to 377bf000 - 379fd9b1 Mar 24 10:46:36 stt300 kernel: [ 0.000000] ACPI: RSDP 000fe020 00024 (v02 HP ) Mar 24 10:46:36 stt300 kernel: [ 0.000000] ACPI: XSDT 7f5f6120 00074 (v01 HPQOEM SLIC-MPC 00000001 01000013) Mar 24 10:46:36 stt300 kernel: [ 0.000000] ACPI: FACP 7f5f5000 000F4 (v04 HP SLIC-MPC 00000001 MSFT 01000013) Mar 24 10:46:36 stt300 kernel: [ 0.000000] ACPI: DSDT 7f5e6000 0BA96 (v01 HP SLIC-MPC 00000001 MSFT 01000013) Mar 24 10:46:36 stt300 kernel: [ 0.000000] ACPI: FACS 7f589000 00040 Mar 24 10:46:36 stt300 kernel: [ 0.000000] ACPI: HPET 7f5f4000 00038 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013) Mar 24 10:46:36 stt300 kernel: [ 0.000000] ACPI: APIC 7f5f3000 00078 (v02 HPQOEM SLIC-MPC 00000001 MSFT 01000013) Mar 24 10:46:36 stt300 kernel: [ 0.000000] ACPI: MCFG 7f5f2000 0003C (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013) Mar 24 10:46:36 stt300 kernel: [ 0.000000] ACPI: SLIC 7f5e5000 00176 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013) Mar 24 10:46:36 stt300 kernel: [ 0.000000] ACPI: BOOT 7f5e4000 00028 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013) Mar 24 10:46:36 stt300 kernel: [ 0.000000] ACPI: SSDT 7f5e3000 004C4 (v02 PmRef CpuPm 00003000 INTL 20051117) Mar 24 10:46:36 stt300 kernel: [ 0.000000] ACPI: SSDT 7f5e2000 001F7 (v02 PmRef Cpu0Tst 00003000 INTL 20051117) Mar 24 10:46:36 stt300 kernel: [ 0.000000] ACPI: SSDT 7f5e1000 00064 (v02 PmRef Cpu1Tst 00003000 INTL 20051117) Mar 24 10:46:36 stt300 kernel: [ 0.000000] ACPI: WDAT 7f5e0000 00194 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013) Mar 24 10:46:36 stt300 kernel: [ 0.000000] 1148MB HIGHMEM available. Mar 24 10:46:36 stt300 kernel: [ 0.000000] 889MB LOWMEM available. Mar 24 10:46:36 stt300 kernel: [ 0.000000] mapped low ram: 0 - 379fe000 Mar 24 10:46:36 stt300 kernel: [ 0.000000] low ram: 0 - 379fe000 Mar 24 10:46:36 stt300 kernel: [ 0.000000] Zone PFN ranges: Mar 24 10:46:36 stt300 kernel: [ 0.000000] DMA 0x00000010 -> 0x00001000 Mar 24 10:46:36 stt300 kernel: [ 0.000000] Normal 0x00001000 -> 0x000379fe Mar 24 10:46:36 stt300 kernel: [ 0.000000] HighMem 0x000379fe -> 0x0007f600 Mar 24 10:46:36 stt300 kernel: [ 0.000000] Movable zone start PFN for each node Mar 24 10:46:36 stt300 kernel: [ 0.000000] Early memory PFN ranges Mar 24 10:46:36 stt300 kernel: [ 0.000000] 0: 0x00000010 -> 0x0000009f Mar 24 10:46:36 stt300 kernel: [ 0.000000] 0: 0x00000100 -> 0x0007f43f Mar 24 10:46:36 stt300 kernel: [ 0.000000] 0: 0x0007f5f7 -> 0x0007f600 Mar 24 10:46:36 stt300 kernel: [ 0.000000] Using APIC driver default Mar 24 10:46:36 stt300 kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0x408 Mar 24 10:46:36 stt300 kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Mar 24 10:46:36 stt300 kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) Mar 24 10:46:36 stt300 kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled) Mar 24 10:46:36 stt300 kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled) Mar 24 10:46:36 stt300 kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) Mar 24 10:46:36 stt300 kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) Mar 24 10:46:36 stt300 kernel: [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) Mar 24 10:46:36 stt300 kernel: [ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23 Mar 24 10:46:36 stt300 kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) Mar 24 10:46:36 stt300 kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) Mar 24 10:46:36 stt300 kernel: [ 0.000000] Using ACPI (MADT) for SMP configuration information Mar 24 10:46:36 stt300 kernel: [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 Mar 24 10:46:36 stt300 kernel: [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs Mar 24 10:46:36 stt300 kernel: [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 Mar 24 10:46:36 stt300 kernel: [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 Mar 24 10:46:36 stt300 kernel: [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 Mar 24 10:46:36 stt300 kernel: [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:60000000) Mar 24 10:46:36 stt300 kernel: [ 0.000000] Booting paravirtualized kernel on bare hardware Mar 24 10:46:36 stt300 kernel: [ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1 Mar 24 10:46:36 stt300 kernel: [ 0.000000] PERCPU: Embedded 13 pages/cpu @f6400000 s32384 r0 d20864 u524288 Mar 24 10:46:36 stt300 kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 517098 Mar 24 10:46:36 stt300 kernel: [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.3.0 root=UUID=ef88aa1c-5071-41ac-8884-6c991eca9b22 ro quiet Mar 24 10:46:36 stt300 kernel: [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) Mar 24 10:46:36 stt300 kernel: [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Mar 24 10:46:36 stt300 kernel: [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Mar 24 10:46:36 stt300 kernel: [ 0.000000] Initializing CPU#0 Mar 24 10:46:36 stt300 kernel: [ 0.000000] allocated 4173696 bytes of page_cgroup Mar 24 10:46:36 stt300 kernel: [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups Mar 24 10:46:36 stt300 kernel: [ 0.000000] Initializing HighMem for node 0 (000379fe:0007f600) Mar 24 10:46:36 stt300 kernel: [ 0.000000] Memory: 2055784k/2086912k available (2821k kernel code, 28916k reserved, 1322k data, 404k init, 1173800k highmem) Mar 24 10:46:36 stt300 kernel: [ 0.000000] virtual kernel memory layout: Mar 24 10:46:36 stt300 kernel: [ 0.000000] fixmap : 0xffd36000 - 0xfffff000 (2852 kB) Mar 24 10:46:36 stt300 kernel: [ 0.000000] pkmap : 0xffa00000 - 0xffc00000 (2048 kB) Mar 24 10:46:36 stt300 kernel: [ 0.000000] vmalloc : 0xf81fe000 - 0xff9fe000 ( 120 MB) Mar 24 10:46:36 stt300 kernel: [ 0.000000] lowmem : 0xc0000000 - 0xf79fe000 ( 889 MB) Mar 24 10:46:36 stt300 kernel: [ 0.000000] .init : 0xc140c000 - 0xc1471000 ( 404 kB) Mar 24 10:46:36 stt300 kernel: [ 0.000000] .data : 0xc12c15f8 - 0xc140be80 (1322 kB) Mar 24 10:46:36 stt300 kernel: [ 0.000000] .text : 0xc1000000 - 0xc12c15f8 (2821 kB) Mar 24 10:46:36 stt300 kernel: [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. Mar 24 10:46:36 stt300 kernel: [ 0.000000] Hierarchical RCU implementation. Mar 24 10:46:36 stt300 kernel: [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. Mar 24 10:46:36 stt300 kernel: [ 0.000000] NR_IRQS:2304 nr_irqs:712 16 Mar 24 10:46:36 stt300 kernel: [ 0.000000] Console: colour VGA+ 80x25 Mar 24 10:46:36 stt300 kernel: [ 0.000000] console [tty0] enabled Mar 24 10:46:36 stt300 kernel: [ 0.000000] Fast TSC calibration failed Mar 24 10:46:36 stt300 kernel: [ 0.000000] TSC: PIT calibration matches HPET. 1 loops Mar 24 10:46:36 stt300 kernel: [ 0.000000] Detected 1662.663 MHz processor. Mar 24 10:46:36 stt300 kernel: [ 0.008004] Calibrating delay loop (skipped), value calculated using timer frequency.. 3325.32 BogoMIPS (lpj=6650652) Mar 24 10:46:36 stt300 kernel: [ 0.008014] pid_max: default: 32768 minimum: 301 Mar 24 10:46:36 stt300 kernel: [ 0.008108] Security Framework initialized Mar 24 10:46:36 stt300 kernel: [ 0.008116] AppArmor: AppArmor disabled by boot time parameter Mar 24 10:46:36 stt300 kernel: [ 0.008154] Mount-cache hash table entries: 512 Mar 24 10:46:36 stt300 kernel: [ 0.008396] Initializing cgroup subsys cpuacct Mar 24 10:46:36 stt300 kernel: [ 0.008402] Initializing cgroup subsys memory Mar 24 10:46:36 stt300 kernel: [ 0.008424] Initializing cgroup subsys devices Mar 24 10:46:36 stt300 kernel: [ 0.008429] Initializing cgroup subsys freezer Mar 24 10:46:36 stt300 kernel: [ 0.008434] Initializing cgroup subsys net_cls Mar 24 10:46:36 stt300 kernel: [ 0.008439] Initializing cgroup subsys blkio Mar 24 10:46:36 stt300 kernel: [ 0.008453] Initializing cgroup subsys perf_event Mar 24 10:46:36 stt300 kernel: [ 0.008503] Disabled fast string operations Mar 24 10:46:36 stt300 kernel: [ 0.008511] CPU: Physical Processor ID: 0 Mar 24 10:46:36 stt300 kernel: [ 0.008515] CPU: Processor Core ID: 0 Mar 24 10:46:36 stt300 kernel: [ 0.008520] mce: CPU supports 5 MCE banks Mar 24 10:46:36 stt300 kernel: [ 0.008539] using mwait in idle threads. Mar 24 10:46:36 stt300 kernel: [ 0.009090] ACPI: Core revision 20120111 Mar 24 10:46:36 stt300 kernel: [ 0.024109] Enabling APIC mode: Flat. Using 1 I/O APICs Mar 24 10:46:36 stt300 kernel: [ 0.024623] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 Mar 24 10:46:36 stt300 kernel: [ 0.065719] CPU0: Intel(R) Atom(TM) CPU N455 @ 1.66GHz stepping 0a Mar 24 10:46:36 stt300 kernel: [ 0.068003] Performance Events: PEBS fmt0+, Atom events, Intel PMU driver. Mar 24 10:46:36 stt300 kernel: [ 0.068003] ... version: 3 Mar 24 10:46:36 stt300 kernel: [ 0.068003] ... bit width: 40 Mar 24 10:46:36 stt300 kernel: [ 0.068003] ... generic registers: 2 Mar 24 10:46:36 stt300 kernel: [ 0.068003] ... value mask: 000000ffffffffff Mar 24 10:46:36 stt300 kernel: [ 0.068003] ... max period: 000000007fffffff Mar 24 10:46:36 stt300 kernel: [ 0.068003] ... fixed-purpose events: 3 Mar 24 10:46:36 stt300 kernel: [ 0.068003] ... event mask: 0000000700000003 Mar 24 10:46:36 stt300 kernel: [ 0.068003] NMI watchdog enabled, takes one hw-pmu counter. Mar 24 10:46:36 stt300 kernel: [ 0.068003] Booting Node 0, Processors #1 Mar 24 10:46:36 stt300 kernel: [ 0.012000] Initializing CPU#1 Mar 24 10:46:36 stt300 kernel: [ 0.012000] Disabled fast string operations Mar 24 10:46:36 stt300 kernel: [ 0.080072] NMI watchdog enabled, takes one hw-pmu counter. Mar 24 10:46:36 stt300 kernel: [ 0.080147] Brought up 2 CPUs Mar 24 10:46:36 stt300 kernel: [ 0.080155] Total of 2 processors activated (6650.65 BogoMIPS). Mar 24 10:46:36 stt300 kernel: [ 0.080741] devtmpfs: initialized Mar 24 10:46:36 stt300 kernel: [ 0.080741] PM: Registering ACPI NVS region at 7f4bf000 (1048576 bytes) Mar 24 10:46:36 stt300 kernel: [ 0.080741] print_constraints: dummy: Mar 24 10:46:36 stt300 kernel: [ 0.080741] NET: Registered protocol family 16 Mar 24 10:46:36 stt300 kernel: [ 0.080797] ACPI: bus type pci registered Mar 24 10:46:36 stt300 kernel: [ 0.080964] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) Mar 24 10:46:36 stt300 kernel: [ 0.080972] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 Mar 24 10:46:36 stt300 kernel: [ 0.080977] PCI: Using MMCONFIG for extended config space Mar 24 10:46:36 stt300 kernel: [ 0.080981] PCI: Using configuration type 1 for base access Mar 24 10:46:36 stt300 kernel: [ 0.084118] bio: create slab <bio-0> at 0 Mar 24 10:46:36 stt300 kernel: [ 0.084198] ACPI: Added _OSI(Module Device) Mar 24 10:46:36 stt300 kernel: [ 0.084198] ACPI: Added _OSI(Processor Device) Mar 24 10:46:36 stt300 kernel: [ 0.084198] ACPI: Added _OSI(3.0 _SCP Extensions) Mar 24 10:46:36 stt300 kernel: [ 0.084198] ACPI: Added _OSI(Processor Aggregator Device) Mar 24 10:46:36 stt300 kernel: [ 0.091233] ACPI: Executed 1 blocks of module-level executable AML code Mar 24 10:46:36 stt300 kernel: [ 0.095634] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored Mar 24 10:46:36 stt300 kernel: [ 0.096642] ACPI: SSDT 7f494c98 001F7 (v02 PmRef Cpu0Ist 00003000 INTL 20051117) Mar 24 10:46:36 stt300 kernel: [ 0.097481] ACPI: Dynamic OEM Table Load: Mar 24 10:46:36 stt300 kernel: [ 0.097488] ACPI: SSDT (null) 001F7 (v02 PmRef Cpu0Ist 00003000 INTL 20051117) Mar 24 10:46:36 stt300 kernel: [ 0.097794] ACPI: SSDT 7f493e18 001C7 (v02 PmRef Cpu0Cst 00003001 INTL 20051117) Mar 24 10:46:36 stt300 kernel: [ 0.098587] ACPI: Dynamic OEM Table Load: Mar 24 10:46:36 stt300 kernel: [ 0.098594] ACPI: SSDT (null) 001C7 (v02 PmRef Cpu0Cst 00003001 INTL 20051117) Mar 24 10:46:36 stt300 kernel: [ 0.098636] ACPI: SSDT 7f494f18 000D0 (v02 PmRef Cpu1Ist 00003000 INTL 20051117) Mar 24 10:46:36 stt300 kernel: [ 0.100161] ACPI: Dynamic OEM Table Load: Mar 24 10:46:36 stt300 kernel: [ 0.100169] ACPI: SSDT (null) 000D0 (v02 PmRef Cpu1Ist 00003000 INTL 20051117) Mar 24 10:46:36 stt300 kernel: [ 0.100449] ACPI: SSDT 7f492f18 00083 (v02 PmRef Cpu1Cst 00003000 INTL 20051117) Mar 24 10:46:36 stt300 kernel: [ 0.101245] ACPI: Dynamic OEM Table Load: Mar 24 10:46:36 stt300 kernel: [ 0.101252] ACPI: SSDT (null) 00083 (v02 PmRef Cpu1Cst 00003000 INTL 20051117) Mar 24 10:46:36 stt300 kernel: [ 0.408455] ACPI: Interpreter enabled Mar 24 10:46:36 stt300 kernel: [ 0.408472] ACPI: (supports S0 S3 S4 S5) Mar 24 10:46:36 stt300 kernel: [ 0.408537] ACPI: Using IOAPIC for interrupt routing Mar 24 10:46:36 stt300 kernel: [ 0.422309] ACPI: Power Resource [FN00] (on) Mar 24 10:46:36 stt300 kernel: [ 0.423120] ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62 Mar 24 10:46:36 stt300 kernel: [ 0.423493] ACPI: No dock devices found. Mar 24 10:46:36 stt300 kernel: [ 0.423506] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug Mar 24 10:46:36 stt300 kernel: [ 0.424514] ACPI Warning: For \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20120111/nspredef-359) Mar 24 10:46:36 stt300 kernel: [ 0.424550] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) Mar 24 10:46:36 stt300 kernel: [ 0.426110] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] Mar 24 10:46:36 stt300 kernel: [ 0.426118] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] Mar 24 10:46:36 stt300 kernel: [ 0.426124] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] Mar 24 10:46:36 stt300 kernel: [ 0.426133] pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xfebfffff] Mar 24 10:46:36 stt300 kernel: [ 0.426236] PCI host bridge to bus 0000:00 Mar 24 10:46:36 stt300 kernel: [ 0.426242] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] Mar 24 10:46:36 stt300 kernel: [ 0.426248] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] Mar 24 10:46:36 stt300 kernel: [ 0.426254] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] Mar 24 10:46:36 stt300 kernel: [ 0.426261] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff] Mar 24 10:46:36 stt300 kernel: [ 0.434466] pci 0000:00:1c.0: PCI bridge to [bus 01-01] Mar 24 10:46:36 stt300 kernel: [ 0.440063] pci 0000:00:1c.1: PCI bridge to [bus 02-02] Mar 24 10:46:36 stt300 kernel: [ 0.440195] pci 0000:00:1e.0: PCI bridge to [bus 03-03] (subtractive decode) Mar 24 10:46:36 stt300 kernel: [ 0.441290] ACPI Warning: For \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20120111/nspredef-359) Mar 24 10:46:36 stt300 kernel: [ 0.441324] pci0000:00: Requesting ACPI _OSC control (0x1d) Mar 24 10:46:36 stt300 kernel: [ 0.441469] ACPI Warning: For \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20120111/nspredef-359) Mar 24 10:46:36 stt300 kernel: [ 0.441500] pci0000:00: ACPI _OSC request failed (AE_TYPE), returned control mask: 0x1d Mar 24 10:46:36 stt300 kernel: [ 0.441505] ACPI _OSC control for PCIe not granted, disabling ASPM Mar 24 10:46:36 stt300 kernel: [ 0.448252] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12) Mar 24 10:46:36 stt300 kernel: [ 0.448411] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12) Mar 24 10:46:36 stt300 kernel: [ 0.448566] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12) Mar 24 10:46:36 stt300 kernel: [ 0.448716] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12) Mar 24 10:46:36 stt300 kernel: [ 0.448866] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. Mar 24 10:46:36 stt300 kernel: [ 0.449020] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. Mar 24 10:46:36 stt300 kernel: [ 0.449173] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. Mar 24 10:46:36 stt300 kernel: [ 0.449325] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. Mar 24 10:46:36 stt300 kernel: [ 0.449530] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none Mar 24 10:46:36 stt300 kernel: [ 0.449530] vgaarb: loaded Mar 24 10:46:36 stt300 kernel: [ 0.449530] vgaarb: bridge control possible 0000:00:02.0 Mar 24 10:46:36 stt300 kernel: [ 0.449530] PCI: Using ACPI for IRQ routing Mar 24 10:46:36 stt300 kernel: [ 0.459159] HPET: 3 timers in total, 0 timers will be used for per-cpu timer Mar 24 10:46:36 stt300 kernel: [ 0.459171] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 Mar 24 10:46:36 stt300 kernel: [ 0.459182] hpet0: 3 comparators, 64-bit 14.318180 MHz counter Mar 24 10:46:36 stt300 kernel: [ 0.464072] Switching to clocksource hpet Mar 24 10:46:36 stt300 kernel: [ 0.468000] pnp: PnP ACPI init Mar 24 10:46:36 stt300 kernel: [ 0.468060] ACPI: bus type pnp registered Mar 24 10:46:36 stt300 kernel: [ 0.470864] system 00:01: [io 0x0600-0x060f] has been reserved Mar 24 10:46:36 stt300 kernel: [ 0.470872] system 00:01: [io 0x0610] has been reserved Mar 24 10:46:36 stt300 kernel: [ 0.470879] system 00:01: [io 0x0800-0x080f] has been reserved Mar 24 10:46:36 stt300 kernel: [ 0.470887] system 00:01: [io 0x0810-0x0817] has been reserved Mar 24 10:46:36 stt300 kernel: [ 0.470894] system 00:01: [io 0x0400-0x047f] has been reserved Mar 24 10:46:36 stt300 kernel: [ 0.470901] system 00:01: [io 0x0500-0x053f] has been reserved Mar 24 10:46:36 stt300 kernel: [ 0.470909] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved Mar 24 10:46:36 stt300 kernel: [ 0.470917] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved Mar 24 10:46:36 stt300 kernel: [ 0.470925] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved Mar 24 10:46:36 stt300 kernel: [ 0.470932] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved Mar 24 10:46:36 stt300 kernel: [ 0.470940] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved Mar 24 10:46:36 stt300 kernel: [ 0.470948] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved Mar 24 10:46:36 stt300 kernel: [ 0.470955] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved Mar 24 10:46:36 stt300 kernel: [ 0.472225] pnp: PnP ACPI: found 9 devices Mar 24 10:46:36 stt300 kernel: [ 0.472229] ACPI: ACPI bus type pnp unregistered Mar 24 10:46:36 stt300 kernel: [ 0.472236] PnPBIOS: Disabled by ACPI PNP Mar 24 10:46:36 stt300 kernel: [ 0.513353] pci 0000:00:1c.0: PCI bridge to [bus 01-01] Mar 24 10:46:36 stt300 kernel: [ 0.513362] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] Mar 24 10:46:36 stt300 kernel: [ 0.513372] pci 0000:00:1c.0: bridge window [mem 0x93000000-0x93ffffff] Mar 24 10:46:36 stt300 kernel: [ 0.513382] pci 0000:00:1c.0: bridge window [mem 0x90000000-0x90ffffff 64bit pref] Mar 24 10:46:36 stt300 kernel: [ 0.513395] pci 0000:00:1c.1: PCI bridge to [bus 02-02] Mar 24 10:46:36 stt300 kernel: [ 0.513402] pci 0000:00:1c.1: bridge window [io 0x1000-0x1fff] Mar 24 10:46:36 stt300 kernel: [ 0.513413] pci 0000:00:1c.1: bridge window [mem 0x92000000-0x92ffffff] Mar 24 10:46:36 stt300 kernel: [ 0.513422] pci 0000:00:1c.1: bridge window [mem 0x91000000-0x91ffffff 64bit pref] Mar 24 10:46:36 stt300 kernel: [ 0.513435] pci 0000:00:1e.0: PCI bridge to [bus 03-03] Mar 24 10:46:36 stt300 kernel: [ 0.513754] NET: Registered protocol family 2 Mar 24 10:46:36 stt300 kernel: [ 0.513890] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) Mar 24 10:46:36 stt300 kernel: [ 0.514523] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) Mar 24 10:46:36 stt300 kernel: [ 0.515456] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) Mar 24 10:46:36 stt300 kernel: [ 0.515890] TCP: Hash tables configured (established 131072 bind 65536) Mar 24 10:46:36 stt300 kernel: [ 0.515896] TCP reno registered Mar 24 10:46:36 stt300 kernel: [ 0.515905] UDP hash table entries: 512 (order: 2, 16384 bytes) Mar 24 10:46:36 stt300 kernel: [ 0.515924] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) Mar 24 10:46:36 stt300 kernel: [ 0.516225] NET: Registered protocol family 1 Mar 24 10:46:36 stt300 kernel: [ 0.532210] Unpacking initramfs... Mar 24 10:46:36 stt300 kernel: [ 0.639997] Freeing initrd memory: 2300k freed Mar 24 10:46:36 stt300 kernel: [ 0.641678] Simple Boot Flag at 0x44 set to 0x1 Mar 24 10:46:36 stt300 kernel: [ 0.642683] audit: initializing netlink socket (disabled) Mar 24 10:46:36 stt300 kernel: [ 0.642716] type=2000 audit(1332582381.636:1): initialized Mar 24 10:46:36 stt300 kernel: [ 0.670502] highmem bounce pool size: 64 pages Mar 24 10:46:36 stt300 kernel: [ 0.670514] HugeTLB registered 2 MB page size, pre-allocated 0 pages Mar 24 10:46:36 stt300 kernel: [ 0.671473] VFS: Disk quotas dquot_6.5.2 Mar 24 10:46:36 stt300 kernel: [ 0.671564] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Mar 24 10:46:36 stt300 kernel: [ 0.671730] msgmni has been set to 1727 Mar 24 10:46:36 stt300 kernel: [ 0.672197] alg: No test for stdrng (krng) Mar 24 10:46:36 stt300 kernel: [ 0.672296] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) Mar 24 10:46:36 stt300 kernel: [ 0.672304] io scheduler noop registered Mar 24 10:46:36 stt300 kernel: [ 0.672308] io scheduler deadline registered Mar 24 10:46:36 stt300 kernel: [ 0.672351] io scheduler cfq registered (default) Mar 24 10:46:36 stt300 kernel: [ 0.673008] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 Mar 24 10:46:36 stt300 kernel: [ 0.673067] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 Mar 24 10:46:36 stt300 kernel: [ 0.673072] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 Mar 24 10:46:36 stt300 kernel: [ 0.673793] Marking TSC unstable due to TSC halts in idle states deeper than C2 Mar 24 10:46:36 stt300 kernel: [ 0.673882] GHES: HEST is not enabled! Mar 24 10:46:36 stt300 kernel: [ 0.673917] isapnp: Scanning for PnP cards... Mar 24 10:46:36 stt300 kernel: [ 1.027776] isapnp: No Plug & Play device found Mar 24 10:46:36 stt300 kernel: [ 1.027963] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled Mar 24 10:46:36 stt300 kernel: [ 1.029186] Linux agpgart interface v0.103 Mar 24 10:46:36 stt300 kernel: [ 1.029408] agpgart-intel 0000:00:00.0: Intel GMA3150 Chipset Mar 24 10:46:36 stt300 kernel: [ 1.029614] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable Mar 24 10:46:36 stt300 kernel: [ 1.029872] agpgart-intel 0000:00:00.0: detected 8192K stolen memory Mar 24 10:46:36 stt300 kernel: [ 1.030135] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x80000000 Mar 24 10:46:36 stt300 kernel: [ 1.030481] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12 Mar 24 10:46:36 stt300 kernel: [ 1.035932] serio: i8042 KBD port at 0x60,0x64 irq 1 Mar 24 10:46:36 stt300 kernel: [ 1.035948] serio: i8042 AUX port at 0x60,0x64 irq 12 Mar 24 10:46:36 stt300 kernel: [ 1.036344] mousedev: PS/2 mouse device common for all mice Mar 24 10:46:36 stt300 kernel: [ 1.036451] rtc_cmos 00:03: RTC can wake from S4 Mar 24 10:46:36 stt300 kernel: [ 1.036655] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 Mar 24 10:46:36 stt300 kernel: [ 1.036696] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs Mar 24 10:46:36 stt300 kernel: [ 1.036820] cpuidle: using governor ladder Mar 24 10:46:36 stt300 kernel: [ 1.036961] cpuidle: using governor menu Mar 24 10:46:36 stt300 kernel: [ 1.037526] TCP cubic registered Mar 24 10:46:36 stt300 kernel: [ 1.037655] NET: Registered protocol family 10 Mar 24 10:46:36 stt300 kernel: [ 1.038908] Mobile IPv6 Mar 24 10:46:36 stt300 kernel: [ 1.038915] NET: Registered protocol family 17 Mar 24 10:46:36 stt300 kernel: [ 1.038926] Registering the dns_resolver key type Mar 24 10:46:36 stt300 kernel: [ 1.038967] Using IPI No-Shortcut mode Mar 24 10:46:36 stt300 kernel: [ 1.039344] registered taskstats version 1 Mar 24 10:46:36 stt300 kernel: [ 1.040367] rtc_cmos 00:03: setting system clock to 2012-03-24 09:46:22 UTC (1332582382) Mar 24 10:46:36 stt300 kernel: [ 1.040509] Initializing network drop monitor service Mar 24 10:46:36 stt300 kernel: [ 1.040755] Freeing unused kernel memory: 404k freed Mar 24 10:46:36 stt300 kernel: [ 1.041091] Write protecting the kernel text: 2824k Mar 24 10:46:36 stt300 kernel: [ 1.041170] Write protecting the kernel read-only data: 1060k Mar 24 10:46:36 stt300 kernel: [ 1.041176] NX-protecting the kernel data: 3320k Mar 24 10:46:36 stt300 kernel: [ 1.166076] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 Mar 24 10:46:36 stt300 kernel: [ 1.202576] ACPI Warning: For \_TZ_.THRM._AL0: Return Package has no elements (empty) (20120111/nspredef-463) Mar 24 10:46:36 stt300 kernel: [ 1.202689] ACPI: Invalid active0 threshold Mar 24 10:46:36 stt300 kernel: [ 1.206576] thermal LNXTHERM:00: registered as thermal_zone0 Mar 24 10:46:36 stt300 kernel: [ 1.206586] ACPI: Thermal Zone [THRM] (53 C) Mar 24 10:46:36 stt300 kernel: [ 1.264752] SCSI subsystem initialized Mar 24 10:46:36 stt300 kernel: [ 1.272868] ahci: SSS flag set, parallel bus scan disabled Mar 24 10:46:36 stt300 kernel: [ 1.272927] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0x3 impl SATA mode Mar 24 10:46:36 stt300 kernel: [ 1.272940] ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pmp pio slum part Mar 24 10:46:36 stt300 kernel: [ 1.275477] scsi0 : ahci Mar 24 10:46:36 stt300 kernel: [ 1.275846] scsi1 : ahci Mar 24 10:46:36 stt300 kernel: [ 1.276227] scsi2 : ahci Mar 24 10:46:36 stt300 kernel: [ 1.276533] scsi3 : ahci Mar 24 10:46:36 stt300 kernel: [ 1.277319] ata1: SATA max UDMA/133 abar m1024@0x94204000 port 0x94204100 irq 42 Mar 24 10:46:36 stt300 kernel: [ 1.277333] ata2: SATA max UDMA/133 abar m1024@0x94204000 port 0x94204180 irq 42 Mar 24 10:46:36 stt300 kernel: [ 1.277342] ata3: DUMMY Mar 24 10:46:36 stt300 kernel: [ 1.277348] ata4: DUMMY Mar 24 10:46:36 stt300 kernel: [ 1.768138] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Mar 24 10:46:36 stt300 kernel: [ 1.769009] ata1.00: unexpected _GTF length (4) Mar 24 10:46:36 stt300 kernel: [ 1.819001] ata1.00: ATA-8: ST9250315AS, 0001SDM1, max UDMA/133 Mar 24 10:46:36 stt300 kernel: [ 1.819013] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32) Mar 24 10:46:36 stt300 kernel: [ 1.820840] ata1.00: unexpected _GTF length (4) Mar 24 10:46:36 stt300 kernel: [ 1.821189] ata1.00: configured for UDMA/133 Mar 24 10:46:36 stt300 kernel: [ 1.821479] scsi 0:0:0:0: Direct-Access ATA ST9250315AS 0001 PQ: 0 ANSI: 5 Mar 24 10:46:36 stt300 kernel: [ 2.140160] ata2: SATA link down (SStatus 0 SControl 300) Mar 24 10:46:36 stt300 kernel: [ 2.152587] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB) Mar 24 10:46:36 stt300 kernel: [ 2.152823] sd 0:0:0:0: [sda] Write Protect is off Mar 24 10:46:36 stt300 kernel: [ 2.152930] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Mar 24 10:46:36 stt300 kernel: [ 2.265447] sda: sda1 sda2 Mar 24 10:46:36 stt300 kernel: [ 2.266465] sd 0:0:0:0: [sda] Attached SCSI disk Mar 24 10:46:36 stt300 kernel: [ 2.674451] PM: Starting manual resume from disk Mar 24 10:46:36 stt300 kernel: [ 2.683385] REISERFS (device sda2): found reiserfs format "3.6" with standard journal Mar 24 10:46:36 stt300 kernel: [ 2.683412] REISERFS (device sda2): using ordered data mode Mar 24 10:46:36 stt300 kernel: [ 2.683416] reiserfs: using flush barriers Mar 24 10:46:36 stt300 kernel: [ 2.690954] REISERFS (device sda2): journal params: device sda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 Mar 24 10:46:36 stt300 kernel: [ 2.691543] REISERFS (device sda2): checking transaction log (sda2) Mar 24 10:46:36 stt300 kernel: [ 2.761930] REISERFS (device sda2): Using r5 hash to sort names Mar 24 10:46:36 stt300 kernel: [ 6.078092] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 Mar 24 10:46:36 stt300 kernel: [ 6.078111] ACPI: Power Button [PWRB] Mar 24 10:46:36 stt300 kernel: [ 6.078342] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2 Mar 24 10:46:36 stt300 kernel: [ 6.085235] ACPI: Lid Switch [LID0] Mar 24 10:46:36 stt300 kernel: [ 6.089478] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 Mar 24 10:46:36 stt300 kernel: [ 6.089495] ACPI: Power Button [PWRF] Mar 24 10:46:36 stt300 kernel: [ 6.128356] wmi: Mapper loaded Mar 24 10:46:36 stt300 kernel: [ 6.201387] rts_pstor: module is from the staging directory, the quality is unknown, you have been warned. Mar 24 10:46:36 stt300 kernel: [ 6.203819] Initializing Realtek PCIE storage driver... Mar 24 10:46:36 stt300 kernel: [ 6.206715] Resource length: 0x10000 Mar 24 10:46:36 stt300 kernel: [ 6.206783] Original address: 0x93000000, remapped address: 0xf8420000 Mar 24 10:46:36 stt300 kernel: [ 6.206797] pci->irq = 17 Mar 24 10:46:36 stt300 kernel: [ 6.206804] rtsx_acquire_irq: chip->msi_en = 0, pci->irq = 17 Mar 24 10:46:36 stt300 kernel: [ 6.222027] bcma: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x24, class 0x0) Mar 24 10:46:36 stt300 kernel: [ 6.222065] bcma: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x18, class 0x0) Mar 24 10:46:36 stt300 kernel: [ 6.222133] bcma: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x11, class 0x0) Mar 24 10:46:36 stt300 kernel: [ 6.254225] bcma: Bus registered Mar 24 10:46:36 stt300 kernel: [ 6.323696] iTCO_vendor_support: vendor-support=0 Mar 24 10:46:36 stt300 kernel: [ 6.362190] input: PC Speaker as /devices/platform/pcspkr/input/input4 Mar 24 10:46:36 stt300 kernel: [ 6.404470] scsi4 : SCSI emulation for PCI-Express Mass Storage devices Mar 24 10:46:36 stt300 kernel: [ 6.404772] rts_pstor: waiting for device to settle before scanning Mar 24 10:46:36 stt300 kernel: [ 6.418704] usbcore: registered new interface driver usbfs Mar 24 10:46:36 stt300 kernel: [ 6.423034] usbcore: registered new interface driver hub Mar 24 10:46:36 stt300 kernel: [ 6.423181] usbcore: registered new device driver usb Mar 24 10:46:36 stt300 kernel: [ 6.455230] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver Mar 24 10:46:36 stt300 kernel: [ 6.455357] ehci_hcd 0000:00:1d.7: EHCI Host Controller Mar 24 10:46:36 stt300 kernel: [ 6.455447] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 Mar 24 10:46:36 stt300 kernel: [ 6.455504] ehci_hcd 0000:00:1d.7: using broken periodic workaround Mar 24 10:46:36 stt300 kernel: [ 6.455528] ehci_hcd 0000:00:1d.7: debug port 1 Mar 24 10:46:36 stt300 kernel: [ 6.459550] ehci_hcd 0000:00:1d.7: irq 16, io mem 0x94204400 Mar 24 10:46:36 stt300 kernel: [ 6.468090] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 Mar 24 10:46:36 stt300 kernel: [ 6.468169] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 Mar 24 10:46:36 stt300 kernel: [ 6.468176] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Mar 24 10:46:36 stt300 kernel: [ 6.468182] usb usb1: Product: EHCI Host Controller Mar 24 10:46:36 stt300 kernel: [ 6.468187] usb usb1: Manufacturer: Linux 3.3.0 ehci_hcd Mar 24 10:46:36 stt300 kernel: [ 6.468192] usb usb1: SerialNumber: 0000:00:1d.7 Mar 24 10:46:36 stt300 kernel: [ 6.468576] hub 1-0:1.0: USB hub found Mar 24 10:46:36 stt300 kernel: [ 6.468595] hub 1-0:1.0: 8 ports detected Mar 24 10:46:36 stt300 kernel: [ 6.496311] uhci_hcd: USB Universal Host Controller Interface driver Mar 24 10:46:36 stt300 kernel: [ 6.496441] uhci_hcd 0000:00:1d.0: UHCI Host Controller Mar 24 10:46:36 stt300 kernel: [ 6.496478] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 Mar 24 10:46:36 stt300 kernel: [ 6.496856] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00003080 Mar 24 10:46:36 stt300 kernel: [ 6.496980] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 Mar 24 10:46:36 stt300 kernel: [ 6.496987] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Mar 24 10:46:36 stt300 kernel: [ 6.496993] usb usb2: Product: UHCI Host Controller Mar 24 10:46:36 stt300 kernel: [ 6.496998] usb usb2: Manufacturer: Linux 3.3.0 uhci_hcd Mar 24 10:46:36 stt300 kernel: [ 6.497003] usb usb2: SerialNumber: 0000:00:1d.0 Mar 24 10:46:36 stt300 kernel: [ 6.497860] hub 2-0:1.0: USB hub found Mar 24 10:46:36 stt300 kernel: [ 6.497884] hub 2-0:1.0: 2 ports detected Mar 24 10:46:36 stt300 kernel: [ 6.498169] uhci_hcd 0000:00:1d.1: UHCI Host Controller Mar 24 10:46:36 stt300 kernel: [ 6.498197] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 Mar 24 10:46:36 stt300 kernel: [ 6.498288] uhci_hcd 0000:00:1d.1: irq 18, io base 0x00003060 Mar 24 10:46:36 stt300 kernel: [ 6.498412] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 Mar 24 10:46:36 stt300 kernel: [ 6.498422] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Mar 24 10:46:36 stt300 kernel: [ 6.498431] usb usb3: Product: UHCI Host Controller Mar 24 10:46:36 stt300 kernel: [ 6.498438] usb usb3: Manufacturer: Linux 3.3.0 uhci_hcd Mar 24 10:46:36 stt300 kernel: [ 6.498446] usb usb3: SerialNumber: 0000:00:1d.1 Mar 24 10:46:36 stt300 kernel: [ 6.499249] hub 3-0:1.0: USB hub found Mar 24 10:46:36 stt300 kernel: [ 6.499269] hub 3-0:1.0: 2 ports detected Mar 24 10:46:36 stt300 kernel: [ 6.499558] uhci_hcd 0000:00:1d.2: UHCI Host Controller Mar 24 10:46:36 stt300 kernel: [ 6.499586] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 Mar 24 10:46:36 stt300 kernel: [ 6.499637] uhci_hcd 0000:00:1d.2: irq 17, io base 0x00003040 Mar 24 10:46:36 stt300 kernel: [ 6.499754] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 Mar 24 10:46:36 stt300 kernel: [ 6.499764] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Mar 24 10:46:36 stt300 kernel: [ 6.499773] usb usb4: Product: UHCI Host Controller Mar 24 10:46:36 stt300 kernel: [ 6.499780] usb usb4: Manufacturer: Linux 3.3.0 uhci_hcd Mar 24 10:46:36 stt300 kernel: [ 6.499787] usb usb4: SerialNumber: 0000:00:1d.2 Mar 24 10:46:36 stt300 kernel: [ 6.500512] hub 4-0:1.0: USB hub found Mar 24 10:46:36 stt300 kernel: [ 6.500531] hub 4-0:1.0: 2 ports detected Mar 24 10:46:36 stt300 kernel: [ 6.500777] uhci_hcd 0000:00:1d.3: UHCI Host Controller Mar 24 10:46:36 stt300 kernel: [ 6.500804] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 Mar 24 10:46:36 stt300 kernel: [ 6.500885] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00003020 Mar 24 10:46:36 stt300 kernel: [ 6.500998] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 Mar 24 10:46:36 stt300 kernel: [ 6.501008] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Mar 24 10:46:36 stt300 kernel: [ 6.501016] usb usb5: Product: UHCI Host Controller Mar 24 10:46:36 stt300 kernel: [ 6.501023] usb usb5: Manufacturer: Linux 3.3.0 uhci_hcd Mar 24 10:46:36 stt300 kernel: [ 6.501030] usb usb5: SerialNumber: 0000:00:1d.3 Mar 24 10:46:36 stt300 kernel: [ 6.501724] hub 5-0:1.0: USB hub found Mar 24 10:46:36 stt300 kernel: [ 6.501742] hub 5-0:1.0: 2 ports detected Mar 24 10:46:36 stt300 kernel: [ 6.679653] ACPI: Battery Slot [BAT0] (battery present) Mar 24 10:46:36 stt300 kernel: [ 6.685730] ACPI: AC Adapter [AC] (off-line) Mar 24 10:46:36 stt300 kernel: [ 6.724875] input: HP WMI hotkeys as /devices/virtual/input/input5 Mar 24 10:46:36 stt300 kernel: [ 6.731376] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07 Mar 24 10:46:36 stt300 kernel: [ 6.731649] iTCO_wdt: Found a NM10 TCO device (Version=2, TCOBASE=0x0460) Mar 24 10:46:36 stt300 kernel: [ 6.731808] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) Mar 24 10:46:36 stt300 kernel: [ 6.751315] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded Mar 24 10:46:36 stt300 kernel: [ 6.751435] r8169 0000:01:00.0: (unregistered net_device): unknown MAC, using family default Mar 24 10:46:36 stt300 kernel: [ 6.753215] r8169 0000:01:00.0: eth0: RTL8101e at 0xf8346000, 68:b5:99:d3:c1:d8, XID 04000000 IRQ 43 Mar 24 10:46:36 stt300 kernel: [ 6.780249] usb 1-8: new high-speed USB device number 2 using ehci_hcd Mar 24 10:46:36 stt300 kernel: [ 6.782456] [drm] Initialized drm 1.1.0 20060810 Mar 24 10:46:36 stt300 kernel: [ 6.812890] i915 0000:00:02.0: power state changed by ACPI to D0 Mar 24 10:46:36 stt300 kernel: [ 6.812902] i915 0000:00:02.0: power state changed by ACPI to D0 Mar 24 10:46:36 stt300 kernel: [ 6.867459] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). Mar 24 10:46:36 stt300 kernel: [ 6.867466] [drm] Driver supports precise vblank timestamp query. Mar 24 10:46:36 stt300 kernel: [ 6.867545] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem Mar 24 10:46:36 stt300 kernel: [ 6.946769] cfg80211: Calling CRDA to update world regulatory domain Mar 24 10:46:36 stt300 kernel: [ 6.982629] usb 1-8: New USB device found, idVendor=174f, idProduct=1122 Mar 24 10:46:36 stt300 kernel: [ 6.982638] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Mar 24 10:46:36 stt300 kernel: [ 6.982644] usb 1-8: Product: HP Webcam Mar 24 10:46:36 stt300 kernel: [ 6.982649] usb 1-8: Manufacturer: D-MAX Mar 24 10:46:36 stt300 kernel: [ 6.982653] usb 1-8: SerialNumber: 00 Mar 24 10:46:36 stt300 kernel: [ 7.101847] brcmsmac bcma0:0: mfg 4bf core 812 rev 24 class 0 irq 17 Mar 24 10:46:36 stt300 kernel: [ 7.199679] [drm] initialized overlay support Mar 24 10:46:36 stt300 kernel: [ 7.225588] fbcon: inteldrmfb (fb0) is primary device Mar 24 10:46:36 stt300 kernel: [ 7.404147] rts_pstor: device scan complete Mar 24 10:46:36 stt300 kernel: [ 7.404394] scsi 4:0:0:0: Direct-Access Generic- xD/SD/M.S. 1.00 PQ: 0 ANSI: 0 CCS Mar 24 10:46:36 stt300 kernel: [ 7.406491] sd 4:0:0:0: [sdb] Attached SCSI removable disk Mar 24 10:46:36 stt300 kernel: [ 7.627082] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.4, id: 0x1e0b1, caps: 0xd04773/0xa40000/0xa0400 Mar 24 10:46:36 stt300 kernel: [ 7.675752] Console: switching to colour frame buffer device 128x37 Mar 24 10:46:36 stt300 kernel: [ 7.683857] fb0: inteldrmfb frame buffer device Mar 24 10:46:36 stt300 kernel: [ 7.683862] drm: registered panic notifier Mar 24 10:46:36 stt300 kernel: [ 7.687365] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6 Mar 24 10:46:36 stt300 kernel: [ 7.691447] acpi device:21: registered as cooling_device2 Mar 24 10:46:36 stt300 kernel: [ 7.692129] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input7 Mar 24 10:46:36 stt300 kernel: [ 7.692288] ACPI: Video Device [OVGA] (multi-head: yes rom: no post: no) Mar 24 10:46:36 stt300 kernel: [ 7.692430] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 Mar 24 10:46:36 stt300 kernel: [ 7.898305] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8 Mar 24 10:46:36 stt300 kernel: [ 7.912478] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 Mar 24 10:46:36 stt300 kernel: [ 7.912799] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 Mar 24 10:46:36 stt300 kernel: [ 7.916861] Linux media interface: v0.10 Mar 24 10:46:36 stt300 kernel: [ 7.933832] Linux video capture interface: v2.00 Mar 24 10:46:36 stt300 kernel: [ 7.949819] uvcvideo: Found UVC 1.00 device HP Webcam (174f:1122) Mar 24 10:46:36 stt300 kernel: [ 7.963895] input: HP Webcam as /devices/pci0000:00/0000:00:1d.7/usb1/1-8/1-8:1.0/input/input11 Mar 24 10:46:36 stt300 kernel: [ 7.966698] usbcore: registered new interface driver uvcvideo Mar 24 10:46:36 stt300 kernel: [ 7.966707] USB Video Class driver (1.1.1) Mar 24 10:46:36 stt300 kernel: [ 8.624799] cfg80211: World regulatory domain updated: Mar 24 10:46:36 stt300 kernel: [ 8.624807] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) Mar 24 10:46:36 stt300 kernel: [ 8.624815] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Mar 24 10:46:36 stt300 kernel: [ 8.624821] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) Mar 24 10:46:36 stt300 kernel: [ 8.624828] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) Mar 24 10:46:36 stt300 kernel: [ 8.624834] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Mar 24 10:46:36 stt300 kernel: [ 8.624840] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Mar 24 10:46:36 stt300 kernel: [ 8.624864] cfg80211: Calling CRDA for country: US Mar 24 10:46:36 stt300 kernel: [ 8.639326] cfg80211: Regulatory domain changed to country: US Mar 24 10:46:36 stt300 kernel: [ 8.639334] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) Mar 24 10:46:36 stt300 kernel: [ 8.639342] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) Mar 24 10:46:36 stt300 kernel: [ 8.639348] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) Mar 24 10:46:36 stt300 kernel: [ 8.639355] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Mar 24 10:46:36 stt300 kernel: [ 8.639361] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Mar 24 10:46:36 stt300 kernel: [ 8.639367] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Mar 24 10:46:36 stt300 kernel: [ 8.639373] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) Mar 24 10:46:36 stt300 kernel: [ 10.038086] Adding 3905532k swap on /dev/sda1. Priority:-1 extents:1 across:3905532k Mar 24 10:46:36 stt300 kernel: [ 10.234123] reiserfs: enabling write barrier flush mode Mar 24 10:46:36 stt300 kernel: [ 10.448064] loop: module loaded Mar 24 10:46:36 stt300 kernel: [ 13.834853] fuse init (API version 7.18) Mar 24 10:46:39 stt300 kernel: [ 17.866253] r8169 0000:01:00.0: eth0: link down Mar 24 10:46:39 stt300 kernel: [ 17.866631] ADDRCONF(NETDEV_UP): eth0: link is not ready Mar 24 10:46:39 stt300 kernel: [ 17.929003] ADDRCONF(NETDEV_UP): wlan0: link is not ready Mar 24 10:46:42 stt300 kernel: [ 20.590847] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input12 Mar 24 10:46:46 stt300 kernel: [ 24.642040] lp: driver loaded but no devices found Mar 24 10:46:46 stt300 kernel: [ 24.825941] ppdev: user-space parallel port driver Mar 24 10:47:25 stt300 kernel: [ 64.346080] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.3.0 (root@stt300) (gcc version 4.6.3 (Debian 4.6.3-1) ) #1 SMP Fri Mar 23 16:27:23 CET 2012 [ 0.000000] Disabled fast string operations [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007f43f000 (usable) [ 0.000000] BIOS-e820: 000000007f43f000 - 000000007f4bf000 (reserved) [ 0.000000] BIOS-e820: 000000007f4bf000 - 000000007f5bf000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007f5bf000 - 000000007f5f7000 (ACPI data) [ 0.000000] BIOS-e820: 000000007f5f7000 - 000000007f600000 (usable) [ 0.000000] BIOS-e820: 000000007f600000 - 0000000080000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI 2.6 present. [ 0.000000] DMI: Hewlett-Packard Compaq Mini CQ10-500 /148A, BIOS F.15 01/14/2011 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] last_pfn = 0x7f600 max_arch_pfn = 0x1000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0FFE00000 mask 0FFE00000 write-protect [ 0.000000] 1 base 000000000 mask 0C0000000 write-back [ 0.000000] 2 base 040000000 mask 0C0000000 write-back [ 0.000000] 3 base 07F800000 mask 0FF800000 uncachable [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] initial memory mapped : 0 - 01a00000 [ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384 [ 0.000000] init_memory_mapping: 0000000000000000-00000000379fe000 [ 0.000000] 0000000000 - 0000200000 page 4k [ 0.000000] 0000200000 - 0037800000 page 2M [ 0.000000] 0037800000 - 00379fe000 page 4k [ 0.000000] kernel direct mapping tables up to 379fe000 @ 19fa000-1a00000 [ 0.000000] RAMDISK: 37b72000 - 37db1000 [ 0.000000] Allocated new RAMDISK: 377bf000 - 379fd9b2 [ 0.000000] Move RAMDISK from 0000000037b72000 - 0000000037db09b1 to 377bf000 - 379fd9b1 [ 0.000000] ACPI: RSDP 000fe020 00024 (v02 HP ) [ 0.000000] ACPI: XSDT 7f5f6120 00074 (v01 HPQOEM SLIC-MPC 00000001 01000013) [ 0.000000] ACPI: FACP 7f5f5000 000F4 (v04 HP SLIC-MPC 00000001 MSFT 01000013) [ 0.000000] ACPI: DSDT 7f5e6000 0BA96 (v01 HP SLIC-MPC 00000001 MSFT 01000013) [ 0.000000] ACPI: FACS 7f589000 00040 [ 0.000000] ACPI: HPET 7f5f4000 00038 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013) [ 0.000000] ACPI: APIC 7f5f3000 00078 (v02 HPQOEM SLIC-MPC 00000001 MSFT 01000013) [ 0.000000] ACPI: MCFG 7f5f2000 0003C (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013) [ 0.000000] ACPI: SLIC 7f5e5000 00176 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013) [ 0.000000] ACPI: BOOT 7f5e4000 00028 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013) [ 0.000000] ACPI: SSDT 7f5e3000 004C4 (v02 PmRef CpuPm 00003000 INTL 20051117) [ 0.000000] ACPI: SSDT 7f5e2000 001F7 (v02 PmRef Cpu0Tst 00003000 INTL 20051117) [ 0.000000] ACPI: SSDT 7f5e1000 00064 (v02 PmRef Cpu1Tst 00003000 INTL 20051117) [ 0.000000] ACPI: WDAT 7f5e0000 00194 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 1148MB HIGHMEM available. [ 0.000000] 889MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 379fe000 [ 0.000000] low ram: 0 - 379fe000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000379fe [ 0.000000] HighMem 0x000379fe -> 0x0007f600 [ 0.000000] Movable zone start PFN for each node [ 0.000000] Early memory PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0007f43f [ 0.000000] 0: 0x0007f5f7 -> 0x0007f600 [ 0.000000] On node 0 totalpages: 521175 [ 0.000000] free_area_init_node: node 0, pgdat c1404400, node_mem_map f67ce200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 1748 pages used for memmap [ 0.000000] Normal zone: 221994 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2297 pages used for memmap [ 0.000000] HighMem zone: 291153 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:60000000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 13 pages/cpu @f6400000 s32384 r0 d20864 u524288 [ 0.000000] pcpu-alloc: s32384 r0 d20864 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 517098 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.3.0 root=UUID=ef88aa1c-5071-41ac-8884-6c991eca9b22 ro quiet [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 4173696 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000379fe:0007f600) [ 0.000000] Memory: 2055784k/2086912k available (2821k kernel code, 28916k reserved, 1322k data, 404k init, 1173800k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xffd36000 - 0xfffff000 (2852 kB) [ 0.000000] pkmap : 0xffa00000 - 0xffc00000 (2048 kB) [ 0.000000] vmalloc : 0xf81fe000 - 0xff9fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf79fe000 ( 889 MB) [ 0.000000] .init : 0xc140c000 - 0xc1471000 ( 404 kB) [ 0.000000] .data : 0xc12c15f8 - 0xc140be80 (1322 kB) [ 0.000000] .text : 0xc1000000 - 0xc12c15f8 (2821 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] NR_IRQS:2304 nr_irqs:712 16 [ 0.000000] CPU 0 irqstacks, hard=f5c06000 soft=f5c08000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration failed [ 0.000000] TSC: PIT calibration matches HPET. 1 loops [ 0.000000] Detected 1662.663 MHz processor. [ 0.008004] Calibrating delay loop (skipped), value calculated using timer frequency.. 3325.32 BogoMIPS (lpj=6650652) [ 0.008014] pid_max: default: 32768 minimum: 301 [ 0.008108] Security Framework initialized [ 0.008116] AppArmor: AppArmor disabled by boot time parameter [ 0.008154] Mount-cache hash table entries: 512 [ 0.008396] Initializing cgroup subsys cpuacct [ 0.008402] Initializing cgroup subsys memory [ 0.008424] Initializing cgroup subsys devices [ 0.008429] Initializing cgroup subsys freezer [ 0.008434] Initializing cgroup subsys net_cls [ 0.008439] Initializing cgroup subsys blkio [ 0.008453] Initializing cgroup subsys perf_event [ 0.008503] Disabled fast string operations [ 0.008511] CPU: Physical Processor ID: 0 [ 0.008515] CPU: Processor Core ID: 0 [ 0.008520] mce: CPU supports 5 MCE banks [ 0.008533] CPU0: Thermal monitoring handled by SMI [ 0.008539] using mwait in idle threads. [ 0.009090] ACPI: Core revision 20120111 [ 0.024109] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.024623] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.065719] CPU0: Intel(R) Atom(TM) CPU N455 @ 1.66GHz stepping 0a [ 0.068003] Performance Events: PEBS fmt0+, Atom events, Intel PMU driver. [ 0.068003] ... version: 3 [ 0.068003] ... bit width: 40 [ 0.068003] ... generic registers: 2 [ 0.068003] ... value mask: 000000ffffffffff [ 0.068003] ... max period: 000000007fffffff [ 0.068003] ... fixed-purpose events: 3 [ 0.068003] ... event mask: 0000000700000003 [ 0.068003] NMI watchdog enabled, takes one hw-pmu counter. [ 0.068003] CPU 1 irqstacks, hard=f5cf2000 soft=f5cf4000 [ 0.068003] Booting Node 0, Processors #1 [ 0.068003] smpboot cpu 1: start_ip = 9b000 [ 0.012000] Initializing CPU#1 [ 0.012000] Disabled fast string operations [ 0.012000] CPU1: Thermal monitoring handled by SMI [ 0.080072] NMI watchdog enabled, takes one hw-pmu counter. [ 0.080147] Brought up 2 CPUs [ 0.080155] Total of 2 processors activated (6650.65 BogoMIPS). [ 0.080741] devtmpfs: initialized [ 0.080741] PM: Registering ACPI NVS region at 7f4bf000 (1048576 bytes) [ 0.080741] print_constraints: dummy: [ 0.080741] NET: Registered protocol family 16 [ 0.080797] ACPI: bus type pci registered [ 0.080964] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.080972] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.080977] PCI: Using MMCONFIG for extended config space [ 0.080981] PCI: Using configuration type 1 for base access [ 0.084118] bio: create slab <bio-0> at 0 [ 0.084198] ACPI: Added _OSI(Module Device) [ 0.084198] ACPI: Added _OSI(Processor Device) [ 0.084198] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.084198] ACPI: Added _OSI(Processor Aggregator Device) [ 0.087532] ACPI: EC: Look up EC in DSDT [ 0.091233] ACPI: Executed 1 blocks of module-level executable AML code [ 0.095634] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.096642] ACPI: SSDT 7f494c98 001F7 (v02 PmRef Cpu0Ist 00003000 INTL 20051117) [ 0.097481] ACPI: Dynamic OEM Table Load: [ 0.097488] ACPI: SSDT (null) 001F7 (v02 PmRef Cpu0Ist 00003000 INTL 20051117) [ 0.097794] ACPI: SSDT 7f493e18 001C7 (v02 PmRef Cpu0Cst 00003001 INTL 20051117) [ 0.098587] ACPI: Dynamic OEM Table Load: [ 0.098594] ACPI: SSDT (null) 001C7 (v02 PmRef Cpu0Cst 00003001 INTL 20051117) [ 0.098636] ACPI: SSDT 7f494f18 000D0 (v02 PmRef Cpu1Ist 00003000 INTL 20051117) [ 0.100161] ACPI: Dynamic OEM Table Load: [ 0.100169] ACPI: SSDT (null) 000D0 (v02 PmRef Cpu1Ist 00003000 INTL 20051117) [ 0.100449] ACPI: SSDT 7f492f18 00083 (v02 PmRef Cpu1Cst 00003000 INTL 20051117) [ 0.101245] ACPI: Dynamic OEM Table Load: [ 0.101252] ACPI: SSDT (null) 00083 (v02 PmRef Cpu1Cst 00003000 INTL 20051117) [ 0.408455] ACPI: Interpreter enabled [ 0.408472] ACPI: (supports S0 S3 S4 S5) [ 0.408537] ACPI: Using IOAPIC for interrupt routing [ 0.422309] ACPI: Power Resource [FN00] (on) [ 0.423120] ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62 [ 0.423493] ACPI: No dock devices found. [ 0.423506] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.424514] ACPI Warning: For \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20120111/nspredef-359) [ 0.424534] \_SB_.PCI0:_OSC evaluation returned wrong type [ 0.424538] _OSC request data:1 8 1f [ 0.424550] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.426110] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] [ 0.426118] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] [ 0.426124] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] [ 0.426133] pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xfebfffff] [ 0.426236] PCI host bridge to bus 0000:00 [ 0.426242] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.426248] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.426254] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.426261] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff] [ 0.426285] pci 0000:00:00.0: [8086:a010] type 0 class 0x000600 [ 0.426349] pci 0000:00:02.0: [8086:a011] type 0 class 0x000300 [ 0.426365] pci 0000:00:02.0: reg 10: [mem 0x94180000-0x941fffff] [ 0.426376] pci 0000:00:02.0: reg 14: [io 0x30c0-0x30c7] [ 0.426387] pci 0000:00:02.0: reg 18: [mem 0x80000000-0x8fffffff pref] [ 0.426397] pci 0000:00:02.0: reg 1c: [mem 0x94000000-0x940fffff] [ 0.426452] pci 0000:00:02.1: [8086:a012] type 0 class 0x000380 [ 0.426466] pci 0000:00:02.1: reg 10: [mem 0x94100000-0x9417ffff] [ 0.426589] pci 0000:00:1b.0: [8086:27d8] type 0 class 0x000403 [ 0.426618] pci 0000:00:1b.0: reg 10: [mem 0x94200000-0x94203fff 64bit] [ 0.426731] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.426775] pci 0000:00:1c.0: [8086:27d0] type 1 class 0x000604 [ 0.426893] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.426938] pci 0000:00:1c.1: [8086:27d2] type 1 class 0x000604 [ 0.427047] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.427096] pci 0000:00:1d.0: [8086:27c8] type 0 class 0x000c03 [ 0.427158] pci 0000:00:1d.0: reg 20: [io 0x3080-0x309f] [ 0.427213] pci 0000:00:1d.1: [8086:27c9] type 0 class 0x000c03 [ 0.427277] pci 0000:00:1d.1: reg 20: [io 0x3060-0x307f] [ 0.427334] pci 0000:00:1d.2: [8086:27ca] type 0 class 0x000c03 [ 0.427396] pci 0000:00:1d.2: reg 20: [io 0x3040-0x305f] [ 0.427452] pci 0000:00:1d.3: [8086:27cb] type 0 class 0x000c03 [ 0.427515] pci 0000:00:1d.3: reg 20: [io 0x3020-0x303f] [ 0.427584] pci 0000:00:1d.7: [8086:27cc] type 0 class 0x000c03 [ 0.428035] pci 0000:00:1d.7: reg 10: [mem 0x94204400-0x942047ff] [ 0.432087] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.432125] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604 [ 0.432236] pci 0000:00:1f.0: [8086:27bc] type 0 class 0x000601 [ 0.432416] pci 0000:00:1f.2: [8086:27c1] type 0 class 0x000106 [ 0.432445] pci 0000:00:1f.2: reg 10: [io 0x30b8-0x30bf] [ 0.432461] pci 0000:00:1f.2: reg 14: [io 0x30cc-0x30cf] [ 0.432475] pci 0000:00:1f.2: reg 18: [io 0x30b0-0x30b7] [ 0.432491] pci 0000:00:1f.2: reg 1c: [io 0x30c8-0x30cb] [ 0.432505] pci 0000:00:1f.2: reg 20: [io 0x30a0-0x30af] [ 0.432522] pci 0000:00:1f.2: reg 24: [mem 0x94204000-0x942043ff] [ 0.432584] pci 0000:00:1f.2: PME# supported from D3hot [ 0.432618] pci 0000:00:1f.3: [8086:27da] type 0 class 0x000c05 [ 0.432694] pci 0000:00:1f.3: reg 20: [io 0x3000-0x301f] [ 0.432884] pci 0000:01:00.0: [10ec:8136] type 0 class 0x000200 [ 0.432953] pci 0000:01:00.0: reg 10: [io 0x2000-0x20ff] [ 0.433068] pci 0000:01:00.0: reg 18: [mem 0x90004000-0x90004fff 64bit pref] [ 0.433143] pci 0000:01:00.0: reg 20: [mem 0x90000000-0x90003fff 64bit pref] [ 0.433454] pci 0000:01:00.0: supports D1 D2 [ 0.433460] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.433657] pci 0000:01:00.1: [10ec:5288] type 0 class 0x00ff00 [ 0.433726] pci 0000:01:00.1: reg 10: [mem 0x93000000-0x9300ffff] [ 0.434248] pci 0000:01:00.1: supports D1 D2 [ 0.434254] pci 0000:01:00.1: PME# supported from D1 D2 D3hot D3cold [ 0.434466] pci 0000:00:1c.0: PCI bridge to [bus 01-01] [ 0.434475] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] [ 0.434483] pci 0000:00:1c.0: bridge window [mem 0x93000000-0x93ffffff] [ 0.434495] pci 0000:00:1c.0: bridge window [mem 0x90000000-0x90ffffff 64bit pref] [ 0.434612] pci 0000:02:00.0: [14e4:4727] type 0 class 0x000280 [ 0.434661] pci 0000:02:00.0: reg 10: [mem 0x92000000-0x92003fff 64bit] [ 0.434897] pci 0000:02:00.0: supports D1 D2 [ 0.440063] pci 0000:00:1c.1: PCI bridge to [bus 02-02] [ 0.440072] pci 0000:00:1c.1: bridge window [io 0x1000-0x1fff] [ 0.440080] pci 0000:00:1c.1: bridge window [mem 0x92000000-0x92ffffff] [ 0.440092] pci 0000:00:1c.1: bridge window [mem 0x91000000-0x91ffffff 64bit pref] [ 0.440195] pci 0000:00:1e.0: PCI bridge to [bus 03-03] (subtractive decode) [ 0.440214] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.440221] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.440228] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.440235] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xfebfffff] (subtractive decode) [ 0.440263] pci_bus 0000:00: on NUMA node 0 [ 0.440272] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.440598] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT] [ 0.440804] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT] [ 0.440951] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT] [ 0.441290] ACPI Warning: For \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20120111/nspredef-359) [ 0.441308] \_SB_.PCI0:_OSC evaluation returned wrong type [ 0.441312] _OSC request data:1 1f 1f [ 0.441324] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.441469] ACPI Warning: For \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20120111/nspredef-359) [ 0.441486] \_SB_.PCI0:_OSC evaluation returned wrong type [ 0.441490] _OSC request data:1 0 1d [ 0.441500] pci0000:00: ACPI _OSC request failed (AE_TYPE), returned control mask: 0x1d [ 0.441505] ACPI _OSC control for PCIe not granted, disabling ASPM [ 0.448252] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12) [ 0.448411] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12) [ 0.448566] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12) [ 0.448716] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12) [ 0.448866] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. [ 0.449020] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. [ 0.449173] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. [ 0.449325] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. [ 0.449530] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.449530] vgaarb: loaded [ 0.449530] vgaarb: bridge control possible 0000:00:02.0 [ 0.449530] PCI: Using ACPI for IRQ routing [ 0.458730] PCI: pci_cache_line_size set to 64 bytes [ 0.458871] reserve RAM buffer: 000000000009fc00 - 000000000009ffff [ 0.458878] reserve RAM buffer: 000000007f43f000 - 000000007fffffff [ 0.458886] reserve RAM buffer: 000000007f600000 - 000000007fffffff [ 0.459159] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.459171] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.459182] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.464072] Switching to clocksource hpet [ 0.468000] pnp: PnP ACPI init [ 0.468060] ACPI: bus type pnp registered [ 0.470030] pnp 00:00: [bus 00-ff] [ 0.470038] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.470044] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.470050] pnp 00:00: [io 0x0d00-0xffff window] [ 0.470057] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.470063] pnp 00:00: [mem 0x000c0000-0x000c3fff window] [ 0.470073] pnp 00:00: [mem 0x000c4000-0x000c7fff window] [ 0.470079] pnp 00:00: [mem 0x000c8000-0x000cbfff window] [ 0.470085] pnp 00:00: [mem 0x000cc000-0x000cffff window] [ 0.470091] pnp 00:00: [mem 0x000d0000-0x000d3fff window] [ 0.470098] pnp 00:00: [mem 0x000d4000-0x000d7fff window] [ 0.470104] pnp 00:00: [mem 0x000d8000-0x000dbfff window] [ 0.470110] pnp 00:00: [mem 0x000dc000-0x000dffff window] [ 0.470116] pnp 00:00: [mem 0x000e0000-0x000e3fff window] [ 0.470122] pnp 00:00: [mem 0x000e4000-0x000e7fff window] [ 0.470128] pnp 00:00: [mem 0x000e8000-0x000ebfff window] [ 0.470135] pnp 00:00: [mem 0x000ec000-0x000effff window] [ 0.470141] pnp 00:00: [mem 0x000f0000-0x000fffff window] [ 0.470147] pnp 00:00: [mem 0x80000000-0xfebfffff window] [ 0.470271] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) [ 0.470593] pnp 00:01: [io 0x002e-0x002f] [ 0.470600] pnp 00:01: [io 0x004e-0x004f] [ 0.470606] pnp 00:01: [io 0x0061] [ 0.470611] pnp 00:01: [io 0x0070] [ 0.470616] pnp 00:01: [io 0x0080] [ 0.470621] pnp 00:01: [io 0x0092] [ 0.470626] pnp 00:01: [io 0x00b2-0x00b3] [ 0.470632] pnp 00:01: [io 0x0063] [ 0.470637] pnp 00:01: [io 0x0065] [ 0.470642] pnp 00:01: [io 0x0067] [ 0.470647] pnp 00:01: [io 0x0600-0x060f] [ 0.470652] pnp 00:01: [io 0x0610] [ 0.470658] pnp 00:01: [io 0x0800-0x080f] [ 0.470663] pnp 00:01: [io 0x0810-0x0817] [ 0.470669] pnp 00:01: [io 0x0400-0x047f] [ 0.470674] pnp 00:01: [io 0x0500-0x053f] [ 0.470680] pnp 00:01: [mem 0xe0000000-0xefffffff] [ 0.470686] pnp 00:01: [mem 0xfed1c000-0xfed1ffff] [ 0.470692] pnp 00:01: [mem 0xfed14000-0xfed17fff] [ 0.470698] pnp 00:01: [mem 0xfed18000-0xfed18fff] [ 0.470703] pnp 00:01: [mem 0xfed19000-0xfed19fff] [ 0.470709] pnp 00:01: [mem 0xfec00000-0xfec00fff] [ 0.470715] pnp 00:01: [mem 0xfee00000-0xfee00fff] [ 0.470864] system 00:01: [io 0x0600-0x060f] has been reserved [ 0.470872] system 00:01: [io 0x0610] has been reserved [ 0.470879] system 00:01: [io 0x0800-0x080f] has been reserved [ 0.470887] system 00:01: [io 0x0810-0x0817] has been reserved [ 0.470894] system 00:01: [io 0x0400-0x047f] has been reserved [ 0.470901] system 00:01: [io 0x0500-0x053f] has been reserved [ 0.470909] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved [ 0.470917] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.470925] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved [ 0.470932] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.470940] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.470948] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.470955] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.470964] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.470997] pnp 00:02: [io 0x0000-0x001f] [ 0.471003] pnp 00:02: [io 0x0081-0x0091] [ 0.471009] pnp 00:02: [io 0x0093-0x009f] [ 0.471014] pnp 00:02: [io 0x00c0-0x00df] [ 0.471020] pnp 00:02: [dma 4] [ 0.471094] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.471161] pnp 00:03: [io 0x0070-0x0077] [ 0.471232] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.471399] pnp 00:04: [irq 0 disabled] [ 0.471418] pnp 00:04: [irq 8] [ 0.471424] pnp 00:04: [mem 0xfed00000-0xfed003ff] [ 0.471501] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.471539] pnp 00:05: [io 0x00f0] [ 0.471551] pnp 00:05: [irq 13] [ 0.471624] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.471658] pnp 00:06: [mem 0xff800000-0xffffffff] [ 0.471730] pnp 00:06: Plug and Play ACPI device, IDs INT0800 (active) [ 0.471785] pnp 00:07: [io 0x0060] [ 0.471791] pnp 00:07: [io 0x0064] [ 0.471802] pnp 00:07: [irq 1] [ 0.471880] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.471930] pnp 00:08: [irq 12] [ 0.472041] pnp 00:08: Plug and Play ACPI device, IDs SYN1e33 SYN1e00 SYN0002 PNP0f13 (active) [ 0.472225] pnp: PnP ACPI: found 9 devices [ 0.472229] ACPI: ACPI bus type pnp unregistered [ 0.472236] PnPBIOS: Disabled by ACPI PNP [ 0.513301] PCI: max bus depth: 1 pci_try_num: 2 [ 0.513353] pci 0000:00:1c.0: PCI bridge to [bus 01-01] [ 0.513362] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] [ 0.513372] pci 0000:00:1c.0: bridge window [mem 0x93000000-0x93ffffff] [ 0.513382] pci 0000:00:1c.0: bridge window [mem 0x90000000-0x90ffffff 64bit pref] [ 0.513395] pci 0000:00:1c.1: PCI bridge to [bus 02-02] [ 0.513402] pci 0000:00:1c.1: bridge window [io 0x1000-0x1fff] [ 0.513413] pci 0000:00:1c.1: bridge window [mem 0x92000000-0x92ffffff] [ 0.513422] pci 0000:00:1c.1: bridge window [mem 0x91000000-0x91ffffff 64bit pref] [ 0.513435] pci 0000:00:1e.0: PCI bridge to [bus 03-03] [ 0.513508] pci 0000:00:1e.0: setting latency timer to 64 [ 0.513517] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.513523] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.513529] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.513536] pci_bus 0000:00: resource 7 [mem 0x80000000-0xfebfffff] [ 0.513543] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff] [ 0.513549] pci_bus 0000:01: resource 1 [mem 0x93000000-0x93ffffff] [ 0.513556] pci_bus 0000:01: resource 2 [mem 0x90000000-0x90ffffff 64bit pref] [ 0.513562] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff] [ 0.513569] pci_bus 0000:02: resource 1 [mem 0x92000000-0x92ffffff] [ 0.513575] pci_bus 0000:02: resource 2 [mem 0x91000000-0x91ffffff 64bit pref] [ 0.513582] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7] [ 0.513588] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff] [ 0.513595] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff] [ 0.513601] pci_bus 0000:03: resource 7 [mem 0x80000000-0xfebfffff] [ 0.513754] NET: Registered protocol family 2 [ 0.513890] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.514523] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.515456] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.515890] TCP: Hash tables configured (established 131072 bind 65536) [ 0.515896] TCP reno registered [ 0.515905] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.515924] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.516225] NET: Registered protocol family 1 [ 0.516262] pci 0000:00:02.0: Boot video device [ 0.532100] PCI: CLS 64 bytes, default 64 [ 0.532210] Unpacking initramfs... [ 0.639997] Freeing initrd memory: 2300k freed [ 0.641678] Simple Boot Flag at 0x44 set to 0x1 [ 0.642683] audit: initializing netlink socket (disabled) [ 0.642716] type=2000 audit(1332582381.636:1): initialized [ 0.670502] highmem bounce pool size: 64 pages [ 0.670514] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.671473] VFS: Disk quotas dquot_6.5.2 [ 0.671564] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.671730] msgmni has been set to 1727 [ 0.672197] alg: No test for stdrng (krng) [ 0.672296] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.672304] io scheduler noop registered [ 0.672308] io scheduler deadline registered [ 0.672351] io scheduler cfq registered (default) [ 0.672602] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X [ 0.672811] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X [ 0.673008] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.673067] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.673072] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.673759] intel_idle: MWAIT substates: 0x20220 [ 0.673780] intel_idle: v0.4 model 0x1C [ 0.673787] intel_idle: lapic_timer_reliable_states 0x2 [ 0.673793] Marking TSC unstable due to TSC halts in idle states deeper than C2 [ 0.673882] GHES: HEST is not enabled! [ 0.673917] isapnp: Scanning for PnP cards... [ 1.027776] isapnp: No Plug & Play device found [ 1.027963] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.029186] Linux agpgart interface v0.103 [ 1.029408] agpgart-intel 0000:00:00.0: Intel GMA3150 Chipset [ 1.029614] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable [ 1.029872] agpgart-intel 0000:00:00.0: detected 8192K stolen memory [ 1.030135] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x80000000 [ 1.030481] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12 [ 1.035932] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.035948] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.036344] mousedev: PS/2 mouse device common for all mice [ 1.036451] rtc_cmos 00:03: RTC can wake from S4 [ 1.036655] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 1.036696] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs [ 1.036820] cpuidle: using governor ladder [ 1.036961] cpuidle: using governor menu [ 1.037526] TCP cubic registered [ 1.037655] NET: Registered protocol family 10 [ 1.038908] Mobile IPv6 [ 1.038915] NET: Registered protocol family 17 [ 1.038926] Registering the dns_resolver key type [ 1.038967] Using IPI No-Shortcut mode [ 1.039313] PM: Hibernation image not present or could not be loaded. [ 1.039344] registered taskstats version 1 [ 1.040367] rtc_cmos 00:03: setting system clock to 2012-03-24 09:46:22 UTC (1332582382) [ 1.040509] Initializing network drop monitor service [ 1.040755] Freeing unused kernel memory: 404k freed [ 1.041091] Write protecting the kernel text: 2824k [ 1.041170] Write protecting the kernel read-only data: 1060k [ 1.041176] NX-protecting the kernel data: 3320k [ 1.077900] udevd[49]: starting version 175 [ 1.166076] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 1.202576] ACPI Warning: For \_TZ_.THRM._AL0: Return Package has no elements (empty) (20120111/nspredef-463) [ 1.202602] ACPI: [Package] has zero elements (f55525a0) [ 1.202689] ACPI: Invalid active0 threshold [ 1.206576] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.206586] ACPI: Thermal Zone [THRM] (53 C) [ 1.264752] SCSI subsystem initialized [ 1.270120] libata version 3.00 loaded. [ 1.272528] ahci 0000:00:1f.2: version 3.0 [ 1.272657] ahci 0000:00:1f.2: irq 42 for MSI/MSI-X [ 1.272868] ahci: SSS flag set, parallel bus scan disabled [ 1.272927] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0x3 impl SATA mode [ 1.272940] ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pmp pio slum part [ 1.272954] ahci 0000:00:1f.2: setting latency timer to 64 [ 1.275477] scsi0 : ahci [ 1.275846] scsi1 : ahci [ 1.276227] scsi2 : ahci [ 1.276533] scsi3 : ahci [ 1.277319] ata1: SATA max UDMA/133 abar m1024@0x94204000 port 0x94204100 irq 42 [ 1.277333] ata2: SATA max UDMA/133 abar m1024@0x94204000 port 0x94204180 irq 42 [ 1.277342] ata3: DUMMY [ 1.277348] ata4: DUMMY [ 1.768138] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.769009] ata1.00: unexpected _GTF length (4) [ 1.819001] ata1.00: ATA-8: ST9250315AS, 0001SDM1, max UDMA/133 [ 1.819013] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 1.820840] ata1.00: unexpected _GTF length (4) [ 1.821189] ata1.00: configured for UDMA/133 [ 1.821479] scsi 0:0:0:0: Direct-Access ATA ST9250315AS 0001 PQ: 0 ANSI: 5 [ 2.140160] ata2: SATA link down (SStatus 0 SControl 300) [ 2.152587] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 2.152823] sd 0:0:0:0: [sda] Write Protect is off [ 2.152833] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.152930] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.265447] sda: sda1 sda2 [ 2.266465] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.674451] PM: Starting manual resume from disk [ 2.674460] PM: Hibernation image partition 8:1 present [ 2.674464] PM: Looking for hibernation image. [ 2.674870] PM: Image not found (code -22) [ 2.674875] PM: Hibernation image not present or could not be loaded. [ 2.683385] REISERFS (device sda2): found reiserfs format "3.6" with standard journal [ 2.683412] REISERFS (device sda2): using ordered data mode [ 2.683416] reiserfs: using flush barriers [ 2.690954] REISERFS (device sda2): journal params: device sda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 [ 2.691543] REISERFS (device sda2): checking transaction log (sda2) [ 2.761930] REISERFS (device sda2): Using r5 hash to sort names [ 4.895893] udevd[250]: starting version 175 [ 6.078092] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 6.078111] ACPI: Power Button [PWRB] [ 6.078342] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2 [ 6.085235] ACPI: Lid Switch [LID0] [ 6.089478] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 6.089495] ACPI: Power Button [PWRF] [ 6.128356] wmi: Mapper loaded [ 6.201387] rts_pstor: module is from the staging directory, the quality is unknown, you have been warned. [ 6.203819] Initializing Realtek PCIE storage driver... [ 6.206715] Resource length: 0x10000 [ 6.206783] Original address: 0x93000000, remapped address: 0xf8420000 [ 6.206797] pci->irq = 17 [ 6.206804] rtsx_acquire_irq: chip->msi_en = 0, pci->irq = 17 [ 6.222027] bcma: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x24, class 0x0) [ 6.222065] bcma: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x18, class 0x0) [ 6.222133] bcma: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x11, class 0x0) [ 6.254225] bcma: Bus registered [ 6.323696] iTCO_vendor_support: vendor-support=0 [ 6.362190] input: PC Speaker as /devices/platform/pcspkr/input/input4 [ 6.404470] scsi4 : SCSI emulation for PCI-Express Mass Storage devices [ 6.404772] rts_pstor: waiting for device to settle before scanning [ 6.418704] usbcore: registered new interface driver usbfs [ 6.423034] usbcore: registered new interface driver hub [ 6.423181] usbcore: registered new device driver usb [ 6.455230] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 6.455345] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 6.455357] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 6.455447] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 6.455504] ehci_hcd 0000:00:1d.7: using broken periodic workaround [ 6.455528] ehci_hcd 0000:00:1d.7: debug port 1 [ 6.459425] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported [ 6.459550] ehci_hcd 0000:00:1d.7: irq 16, io mem 0x94204400 [ 6.468090] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 6.468169] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 6.468176] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.468182] usb usb1: Product: EHCI Host Controller [ 6.468187] usb usb1: Manufacturer: Linux 3.3.0 ehci_hcd [ 6.468192] usb usb1: SerialNumber: 0000:00:1d.7 [ 6.468576] hub 1-0:1.0: USB hub found [ 6.468595] hub 1-0:1.0: 8 ports detected [ 6.496311] uhci_hcd: USB Universal Host Controller Interface driver [ 6.496429] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 6.496441] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 6.496478] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 6.496856] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00003080 [ 6.496980] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 6.496987] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.496993] usb usb2: Product: UHCI Host Controller [ 6.496998] usb usb2: Manufacturer: Linux 3.3.0 uhci_hcd [ 6.497003] usb usb2: SerialNumber: 0000:00:1d.0 [ 6.497860] hub 2-0:1.0: USB hub found [ 6.497884] hub 2-0:1.0: 2 ports detected [ 6.498156] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 6.498169] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 6.498197] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 6.498288] uhci_hcd 0000:00:1d.1: irq 18, io base 0x00003060 [ 6.498412] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 6.498422] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.498431] usb usb3: Product: UHCI Host Controller [ 6.498438] usb usb3: Manufacturer: Linux 3.3.0 uhci_hcd [ 6.498446] usb usb3: SerialNumber: 0000:00:1d.1 [ 6.499249] hub 3-0:1.0: USB hub found [ 6.499269] hub 3-0:1.0: 2 ports detected [ 6.499546] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 6.499558] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 6.499586] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 6.499637] uhci_hcd 0000:00:1d.2: irq 17, io base 0x00003040 [ 6.499754] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 6.499764] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.499773] usb usb4: Product: UHCI Host Controller [ 6.499780] usb usb4: Manufacturer: Linux 3.3.0 uhci_hcd [ 6.499787] usb usb4: SerialNumber: 0000:00:1d.2 [ 6.500512] hub 4-0:1.0: USB hub found [ 6.500531] hub 4-0:1.0: 2 ports detected [ 6.500767] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 6.500777] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 6.500804] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 6.500885] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00003020 [ 6.500998] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 6.501008] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.501016] usb usb5: Product: UHCI Host Controller [ 6.501023] usb usb5: Manufacturer: Linux 3.3.0 uhci_hcd [ 6.501030] usb usb5: SerialNumber: 0000:00:1d.3 [ 6.501724] hub 5-0:1.0: USB hub found [ 6.501742] hub 5-0:1.0: 2 ports detected [ 6.679653] ACPI: Battery Slot [BAT0] (battery present) [ 6.685730] ACPI: AC Adapter [AC] (off-line) [ 6.724875] input: HP WMI hotkeys as /devices/virtual/input/input5 [ 6.731376] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07 [ 6.731649] iTCO_wdt: Found a NM10 TCO device (Version=2, TCOBASE=0x0460) [ 6.731808] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 6.751315] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 6.751435] r8169 0000:01:00.0: (unregistered net_device): unknown MAC, using family default [ 6.751676] r8169 0000:01:00.0: irq 43 for MSI/MSI-X [ 6.753215] r8169 0000:01:00.0: eth0: RTL8101e at 0xf8346000, 68:b5:99:d3:c1:d8, XID 04000000 IRQ 43 [ 6.780249] usb 1-8: new high-speed USB device number 2 using ehci_hcd [ 6.782456] [drm] Initialized drm 1.1.0 20060810 [ 6.812890] i915 0000:00:02.0: power state changed by ACPI to D0 [ 6.812902] i915 0000:00:02.0: power state changed by ACPI to D0 [ 6.812916] i915 0000:00:02.0: setting latency timer to 64 [ 6.867422] i915 0000:00:02.0: irq 44 for MSI/MSI-X [ 6.867459] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 6.867466] [drm] Driver supports precise vblank timestamp query. [ 6.867545] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 6.946769] cfg80211: Calling CRDA to update world regulatory domain [ 6.982629] usb 1-8: New USB device found, idVendor=174f, idProduct=1122 [ 6.982638] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 6.982644] usb 1-8: Product: HP Webcam [ 6.982649] usb 1-8: Manufacturer: D-MAX [ 6.982653] usb 1-8: SerialNumber: 00 [ 7.101847] brcmsmac bcma0:0: mfg 4bf core 812 rev 24 class 0 irq 17 [ 7.199679] [drm] initialized overlay support [ 7.225588] fbcon: inteldrmfb (fb0) is primary device [ 7.404147] rts_pstor: device scan complete [ 7.404394] scsi 4:0:0:0: Direct-Access Generic- xD/SD/M.S. 1.00 PQ: 0 ANSI: 0 CCS [ 7.404505] Bad LUN (0:1) [ 7.404682] Bad target number (1:0) [ 7.404842] Bad target number (2:0) [ 7.405012] Bad target number (3:0) [ 7.405161] Bad target number (4:0) [ 7.405301] Bad target number (5:0) [ 7.405438] Bad target number (6:0) [ 7.405577] Bad target number (7:0) [ 7.406491] sd 4:0:0:0: [sdb] Attached SCSI removable disk [ 7.627082] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.4, id: 0x1e0b1, caps: 0xd04773/0xa40000/0xa0400 [ 7.675752] Console: switching to colour frame buffer device 128x37 [ 7.683857] fb0: inteldrmfb frame buffer device [ 7.683862] drm: registered panic notifier [ 7.687365] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6 [ 7.691447] acpi device:21: registered as cooling_device2 [ 7.692129] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input7 [ 7.692288] ACPI: Video Device [OVGA] (multi-head: yes rom: no post: no) [ 7.692430] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 7.692653] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X [ 7.898305] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8 [ 7.912478] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 7.912799] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 7.916861] Linux media interface: v0.10 [ 7.933832] Linux video capture interface: v2.00 [ 7.949819] uvcvideo: Found UVC 1.00 device HP Webcam (174f:1122) [ 7.963895] input: HP Webcam as /devices/pci0000:00/0000:00:1d.7/usb1/1-8/1-8:1.0/input/input11 [ 7.966698] usbcore: registered new interface driver uvcvideo [ 7.966707] USB Video Class driver (1.1.1) [ 8.026127] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 8.027747] brcms_module_init: register returned 0 [ 8.624799] cfg80211: World regulatory domain updated: [ 8.624807] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 8.624815] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 8.624821] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 8.624828] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 8.624834] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 8.624840] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 8.624864] cfg80211: Calling CRDA for country: US [ 8.639326] cfg80211: Regulatory domain changed to country: US [ 8.639334] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 8.639342] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 8.639348] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [ 8.639355] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 8.639361] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 8.639367] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 8.639373] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 10.038086] Adding 3905532k swap on /dev/sda1. Priority:-1 extents:1 across:3905532k [ 10.234123] reiserfs: enabling write barrier flush mode [ 10.448064] loop: module loaded [ 13.834853] fuse init (API version 7.18) [ 17.866253] r8169 0000:01:00.0: eth0: link down [ 17.866631] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 17.923007] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: false (implement) [ 17.925549] ieee80211 phy0: brcms_ops_config: change power-save mode: false (implement) [ 17.929003] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 20.590847] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input12
