Search Linux Wireless

Re: ath9k_htc fails with "Target is unresponsive"

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



David Madore wrote:
> In other words: loading the module seems to place the dongle in a bad
> state that goes away after ifconfig up (but not by removing the
> modules), and if a reboot happens while the dongle is in that bad
> state, it will fail permanently.

Right, there's a difference here, a 'reboot' of the card is done only when
if the interface is brought up. The device status from the USB subsystem
is used to handle this - it works on x86.

On your platform, I think that a full reboot is required even when doing just
a simple load/unload cycle. I'll come up with a patch to test this.

Thanks for the detailed log.

Sujith
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux