Search Linux Wireless

Re: [PATCH] mac80211: improve PID rate control mechanism by avoiding rate oscillation problem

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, 2012-02-29 at 12:17 +1000, YIN Wei wrote:
> From: Wei YIN

You want an email address here,

> Improve PID rate control mechanism by solving the rate oscillation
> problem. Current PID mechanism is based on a PID  controller which
> tries to minimise the difference between the frame loss ratio (FLR)
> and the target FLR. Therefore it is straight forward that it increases
> to a higher rate when the FLR is less than the target without thinking
> whether the higher rate can be supported. If the higher rate cannot be
> supported, significant FLR will occur, which causes the mechanisms to
> decrease the rate sharply. The proposed approach only updates the rate
> when the proposed rate by the PID controller can achieve better
> throughput than the old rate. This patch applies to kernel 3.3.0.
> Signed-off-by: Wei YIN

and here.

Also since you sent as HTML, it never made it to the list and can't be
applied as a patch, care to resend?

johannes


--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux