Signed-off-by: John W. Linville <linville@xxxxxxxxxxxxx>
---
The dual default lines were the only combination I could find that
actually defaulted to "N" if brcmsmac was already enabled and to "Y"
otherwise. If anyone knows better magic for this, then please speak-up!
drivers/net/wireless/b43/Kconfig | 6 ++++++
drivers/net/wireless/b43/main.c | 2 ++
2 files changed, 8 insertions(+), 0 deletions(-)
diff --git a/drivers/net/wireless/b43/Kconfig b/drivers/net/wireless/b43/Kconfig
index b97a40e..edb4ab2 100644
--- a/drivers/net/wireless/b43/Kconfig
+++ b/drivers/net/wireless/b43/Kconfig
@@ -31,6 +31,12 @@ config B43_BCMA
depends on B43 && BCMA
default y
+config B43_BCMA_EXTRA
+ bool "Hardware support that overlaps with Broadcom-supported brcmsmac driver"
+ depends on B43_BCMA
+ default n if BRCMSMAC || BRCMSMAC_MODULE
+ default y
+
config B43_SSB
bool
depends on B43 && SSB
diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index 41c83d9..b1ae675 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -116,8 +116,10 @@ MODULE_PARM_DESC(pio, "Use PIO accesses by default: 0=DMA, 1=PIO");
#ifdef CONFIG_B43_BCMA
static const struct bcma_device_id b43_bcma_tbl[] = {
BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_80211, 0x11, BCMA_ANY_CLASS),
+#ifdef CONFIG_B43_BCMA_EXTRA
BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_80211, 0x17, BCMA_ANY_CLASS),
BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_80211, 0x18, BCMA_ANY_CLASS),
+#endif
BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_80211, 0x1D, BCMA_ANY_CLASS),
BCMA_CORETABLE_END
};
--
1.7.4.4
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
