I tried the bleeding edge build of compat-wireless (compat-wireless-2011-12-14 build) on Linux-3.1.5. It still leads to kernel panic. I manually got the AP up with these steps: 1. Removed ip from eth0 2. Created a bridge with brctl 3. Added eth0 to br0 4. Ran hostapd with my con file. And it showed this error: l2_packet_receive - recvfrom: Network is down 5. Tried to connect my client devices. None were getting authenticated. 6. I assigned an ip to br0. Client got authenticated. System on AP mode froze. My hostapd.conf: ............................................... interface=wlan0 bridge=br0 driver=nl80211 logger_syslog=-1 logger_syslog_level=2 logger_stdout=-1 logger_stdout_level=2 dump_file=/tmp/hostapd.dump ctrl_interface=/var/run/hostapd ctrl_interface_group=0 ssid=test hw_mode=g channel=1 beacon_int=100 dtim_period=2 max_num_sta=255 rts_threshold=2347 fragm_threshold=2346 macaddr_acl=0 auth_algs=1 ignore_broadcast_ssid=0 wmm_enabled=1 wmm_ac_bk_cwmin=4 wmm_ac_bk_cwmax=10 wmm_ac_bk_aifs=7 wmm_ac_bk_txop_limit=0 wmm_ac_bk_acm=0 wmm_ac_be_aifs=3 wmm_ac_be_cwmin=4 wmm_ac_be_cwmax=10 wmm_ac_be_txop_limit=0 wmm_ac_be_acm=0 wmm_ac_vi_aifs=2 wmm_ac_vi_cwmin=3 wmm_ac_vi_cwmax=4 wmm_ac_vi_txop_limit=94 wmm_ac_vi_acm=0 wmm_ac_vo_aifs=2 wmm_ac_vo_cwmin=2 wmm_ac_vo_cwmax=3 wmm_ac_vo_txop_limit=47 wmm_ac_vo_acm=0 eapol_key_index_workaround=0 eap_server=0 own_ip_addr=127.0.0.1 wpa=3 wpa_passphrase=ashwinalwyn wpa_key_mgmt=WPA-PSK wpa_pairwise=TKIP rsn_pairwise=CCMP ............................................... hostapd log file: .............................................. Configuration file: /home/user/test/hostapd.conf ctrl_interface_group=0 nl80211: Register Action command failed: ret=-114 (Operation already in progress) nl80211: Register Action match - hexdump(len=1): 06 nl80211: Failed to register Action frame processing - ignore for now nl80211: Add own interface ifindex 12 nl80211: Add own interface ifindex 3 nl80211: New interface mon.wlan0 created: ifindex=13 nl80211: Add own interface ifindex 13 nl80211: Adding interface wlan0 into bridge br0 BSS count 1, BSSID mask 00:00:00:00:00:00 (0 bits) nl80211: Added 802.11b mode based on 802.11g information Allowed channel: mode=1 chan=1 freq=2412 MHz max_tx_power=14 dBm Allowed channel: mode=1 chan=2 freq=2417 MHz max_tx_power=14 dBm Allowed channel: mode=1 chan=3 freq=2422 MHz max_tx_power=14 dBm Allowed channel: mode=1 chan=4 freq=2427 MHz max_tx_power=14 dBm Allowed channel: mode=1 chan=5 freq=2432 MHz max_tx_power=14 dBm Allowed channel: mode=1 chan=6 freq=2437 MHz max_tx_power=14 dBm Allowed channel: mode=1 chan=7 freq=2442 MHz max_tx_power=14 dBm Allowed channel: mode=1 chan=8 freq=2447 MHz max_tx_power=14 dBm Allowed channel: mode=1 chan=9 freq=2452 MHz max_tx_power=14 dBm Allowed channel: mode=1 chan=10 freq=2457 MHz max_tx_power=14 dBm Allowed channel: mode=1 chan=11 freq=2462 MHz max_tx_power=14 dBm Allowed channel: mode=0 chan=1 freq=2412 MHz max_tx_power=14 dBm Allowed channel: mode=0 chan=2 freq=2417 MHz max_tx_power=14 dBm Allowed channel: mode=0 chan=3 freq=2422 MHz max_tx_power=14 dBm Allowed channel: mode=0 chan=4 freq=2427 MHz max_tx_power=14 dBm Allowed channel: mode=0 chan=5 freq=2432 MHz max_tx_power=14 dBm Allowed channel: mode=0 chan=6 freq=2437 MHz max_tx_power=14 dBm Allowed channel: mode=0 chan=7 freq=2442 MHz max_tx_power=14 dBm Allowed channel: mode=0 chan=8 freq=2447 MHz max_tx_power=14 dBm Allowed channel: mode=0 chan=9 freq=2452 MHz max_tx_power=14 dBm Allowed channel: mode=0 chan=10 freq=2457 MHz max_tx_power=14 dBm Allowed channel: mode=0 chan=11 freq=2462 MHz max_tx_power=14 dBm RATE[0] rate=10 flags=0x1 RATE[1] rate=20 flags=0x1 RATE[2] rate=55 flags=0x1 RATE[3] rate=110 flags=0x1 RATE[4] rate=60 flags=0x0 RATE[5] rate=90 flags=0x0 RATE[6] rate=120 flags=0x0 RATE[7] rate=180 flags=0x0 RATE[8] rate=240 flags=0x0 RATE[9] rate=360 flags=0x0 RATE[10] rate=480 flags=0x0 RATE[11] rate=540 flags=0x0 Completing interface initialization Mode: IEEE 802.11g Channel: 1 Frequency: 2412 MHz Flushing old station entries Deauthenticate all stations wpa_driver_nl80211_set_key: ifindex=3 alg=0 addr=(nil) key_idx=0 set_tx=1 seq_len=0 key_len=0 wpa_driver_nl80211_set_key: ifindex=3 alg=0 addr=(nil) key_idx=1 set_tx=0 seq_len=0 key_len=0 wpa_driver_nl80211_set_key: ifindex=3 alg=0 addr=(nil) key_idx=2 set_tx=0 seq_len=0 key_len=0 wpa_driver_nl80211_set_key: ifindex=3 alg=0 addr=(nil) key_idx=3 set_tx=0 seq_len=0 key_len=0 Using interface wlan0 with hwaddr 1c:4b:d6:e7:8c:f8 and ssid 'test' Deriving WPA PSK based on passphrase SSID - hexdump_ascii(len=4): 74 65 73 74 test PSK (ASCII passphrase) - hexdump_ascii(len=11): [REMOVED] PSK (from passphrase) - hexdump(len=32): [REMOVED] WPA: group state machine entering state GTK_INIT (VLAN-ID 0) GMK - hexdump(len=32): [REMOVED] GTK - hexdump(len=32): [REMOVED] WPA: group state machine entering state SETKEYSDONE (VLAN-ID 0) wpa_driver_nl80211_set_key: ifindex=3 alg=2 addr=(nil) key_idx=1 set_tx=1 seq_len=0 key_len=32 nl80211: Set beacon (beacon_set=0) wlan0: Setup of interface done. RTM_NEWLINK: operstate=0 ifi_flags=0x1002 () RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added Unknown event 5 RTM_NEWLINK: operstate=0 ifi_flags=0x1002 () RTM_NEWLINK, IFLA_IFNAME: Interface 'mon.wlan0' added Unknown event 5 RTM_NEWLINK: operstate=0 ifi_flags=0x11043 ([UP][RUNNING][LOWER_UP]) RTM_NEWLINK, IFLA_IFNAME: Interface 'mon.wlan0' added Unknown event 5 RTM_NEWLINK: operstate=0 ifi_flags=0x1002 () RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added Unknown event 5 nl80211: Add ifindex 12 for bridge br0 nl80211: Add own interface ifindex 12 RTM_NEWLINK: operstate=0 ifi_flags=0x1002 () RTM_NEWLINK, IFLA_IFNAME: Interface 'br0' added Unknown event 5 RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP]) RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added Unknown event 5 RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP]) RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added Unknown event 5 nl80211: Add ifindex 12 for bridge br0 nl80211: Add own interface ifindex 12 RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP]) RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added Unknown event 5 nl80211: Add ifindex 12 for bridge br0 nl80211: Add own interface ifindex 12 RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP]) RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added Unknown event 5 unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9) STA 5c:da:d4:d9:25:f2 sent probe request for broadcast SSID mgmt::proberesp cb unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9) STA 5c:da:d4:d9:25:f2 sent probe request for broadcast SSID mgmt::proberesp cb unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9) STA 5c:da:d4:d9:25:f2 sent probe request for broadcast SSID mgmt::proberesp cb unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9) STA 5c:da:d4:d9:25:f2 sent probe request for broadcast SSID mgmt::proberesp cb unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9) STA 5c:da:d4:d9:25:f2 sent probe request for broadcast SSID mgmt::proberesp cb unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9) STA 5c:da:d4:d9:25:f2 sent probe request for our SSID mgmt::proberesp cb unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9) STA 5c:da:d4:d9:25:f2 sent probe request for our SSID mgmt::proberesp cb unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9) STA 5c:da:d4:d9:25:f2 sent probe request for our SSID mgmt::proberesp cb unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9) STA 5c:da:d4:d9:25:f2 sent probe request for our SSID mgmt::proberesp cb unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9) STA 5c:da:d4:d9:25:f2 sent probe request for our SSID mgmt::proberesp cb unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9) STA 5c:da:d4:d9:25:f2 sent probe request for our SSID mgmt::proberesp cb unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9) STA 5c:da:d4:d9:25:f2 sent probe request for our SSID mgmt::proberesp cb mgmt::auth authentication: STA=5c:da:d4:d9:25:f2 auth_alg=0 auth_transaction=1 status_code=0 wep=0 New STA wlan0: STA 5c:da:d4:d9:25:f2 IEEE 802.11: authentication OK (open system) wlan0: STA 5c:da:d4:d9:25:f2 MLME: MLME-AUTHENTICATE.indication(5c:da:d4:d9:25:f2, OPEN_SYSTEM) wlan0: STA 5c:da:d4:d9:25:f2 MLME: MLME-DELETEKEYS.request(5c:da:d4:d9:25:f2) authentication reply: STA=5c:da:d4:d9:25:f2 auth_alg=0 auth_transaction=2 resp=0 (IE len=0) mgmt::auth cb wlan0: STA 5c:da:d4:d9:25:f2 IEEE 802.11: authenticated mgmt::assoc_req association request: STA=5c:da:d4:d9:25:f2 capab_info=0x431 listen_interval=10 unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9) WMM IE - hexdump(len=7): 00 50 f2 02 00 01 00 Validating WMM IE: OUI 00:50:f2 OUI type 2 OUI sub-type 0 version 1 QoS info 0x0 new AID 1 wlan0: STA 5c:da:d4:d9:25:f2 IEEE 802.11: association OK (aid 1) mgmt::assoc_resp cb wlan0: STA 5c:da:d4:d9:25:f2 IEEE 802.11: associated (aid 1) wlan0: STA 5c:da:d4:d9:25:f2 MLME: MLME-ASSOCIATE.indication(5c:da:d4:d9:25:f2) wlan0: STA 5c:da:d4:d9:25:f2 MLME: MLME-DELETEKEYS.request(5c:da:d4:d9:25:f2) wpa_driver_nl80211_set_key: ifindex=3 alg=0 addr=0x8c5f588 key_idx=0 set_tx=1 seq_len=0 key_len=0 addr=5c:da:d4:d9:25:f2 wlan0: STA 5c:da:d4:d9:25:f2 WPA: event 1 notification wpa_driver_nl80211_set_key: ifindex=3 alg=0 addr=0x8c5f588 key_idx=0 set_tx=1 seq_len=0 key_len=0 addr=5c:da:d4:d9:25:f2 wlan0: STA 5c:da:d4:d9:25:f2 WPA: start authentication WPA: 5c:da:d4:d9:25:f2 WPA_PTK entering state INITIALIZE wpa_driver_nl80211_set_key: ifindex=3 alg=0 addr=0x8c5f588 key_idx=0 set_tx=1 seq_len=0 key_len=0 addr=5c:da:d4:d9:25:f2 wlan0: STA 5c:da:d4:d9:25:f2 IEEE 802.1X: unauthorizing port WPA: 5c:da:d4:d9:25:f2 WPA_PTK_GROUP entering state IDLE WPA: 5c:da:d4:d9:25:f2 WPA_PTK entering state AUTHENTICATION WPA: 5c:da:d4:d9:25:f2 WPA_PTK entering state AUTHENTICATION2 WPA: 5c:da:d4:d9:25:f2 WPA_PTK entering state INITPSK WPA: 5c:da:d4:d9:25:f2 WPA_PTK entering state PTKSTART wlan0: STA 5c:da:d4:d9:25:f2 WPA: sending 1/4 msg of 4-Way Handshake WPA: Send EAPOL(version=2 secure=0 mic=0 ack=1 install=0 pairwise=8 kde_len=0 keyidx=0 encr=0) nl80211: Event message available nl80211: Ignored unknown event (cmd=19) IEEE 802.1X: 5c:da:d4:d9:25:f2 TX status - version=2 type=3 length=95 - ack=1 wlan0: STA 5c:da:d4:d9:25:f2 WPA: EAPOL-Key timeout WPA: 5c:da:d4:d9:25:f2 WPA_PTK entering state PTKSTART wlan0: STA 5c:da:d4:d9:25:f2 WPA: sending 1/4 msg of 4-Way Handshake WPA: Send EAPOL(version=2 secure=0 mic=0 ack=1 install=0 pairwise=8 kde_len=0 keyidx=0 encr=0) IEEE 802.1X: 5c:da:d4:d9:25:f2 TX status - version=2 type=3 length=95 - ack=1 wlan0: STA 5c:da:d4:d9:25:f2 WPA: EAPOL-Key timeout WPA: 5c:da:d4:d9:25:f2 WPA_PTK entering state PTKSTART wlan0: STA 5c:da:d4:d9:25:f2 WPA: sending 1/4 msg of 4-Way Handshake WPA: Send EAPOL(version=2 secure=0 mic=0 ack=1 install=0 pairwise=8 kde_len=0 keyidx=0 encr=0) IEEE 802.1X: 5c:da:d4:d9:25:f2 TX status - version=2 type=3 length=95 - ack=1 wlan0: STA 5c:da:d4:d9:25:f2 WPA: EAPOL-Key timeout WPA: 5c:da:d4:d9:25:f2 WPA_PTK entering state PTKSTART wlan0: STA 5c:da:d4:d9:25:f2 WPA: sending 1/4 msg of 4-Way Handshake WPA: Send EAPOL(version=2 secure=0 mic=0 ack=1 install=0 pairwise=8 kde_len=0 keyidx=0 encr=0) IEEE 802.1X: 5c:da:d4:d9:25:f2 TX status - version=2 type=3 length=95 - ack=1 wlan0: STA 5c:da:d4:d9:25:f2 WPA: EAPOL-Key timeout WPA: 5c:da:d4:d9:25:f2 WPA_PTK entering state PTKSTART WPA: 5c:da:d4:d9:25:f2 WPA_PTK entering state DISCONNECT hostapd_wpa_auth_disconnect: WPA authenticator requests disconnect: STA 5c:da:d4:d9:25:f2 reason 2 WPA: 5c:da:d4:d9:25:f2 WPA_PTK entering state DISCONNECTED WPA: 5c:da:d4:d9:25:f2 WPA_PTK entering state INITIALIZE wpa_driver_nl80211_set_key: ifindex=3 alg=0 addr=0x8c5f588 key_idx=0 set_tx=1 seq_len=0 key_len=0 addr=5c:da:d4:d9:25:f2 wlan0: STA 5c:da:d4:d9:25:f2 IEEE 802.1X: unauthorizing port wlan0: STA 5c:da:d4:d9:25:f2 IEEE 802.11: deauthenticated due to local deauth request nl80211: Event message available nl80211: Ignored unknown event (cmd=20) unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9) STA 5c:da:d4:d9:25:f2 sent probe request for our SSID mgmt::proberesp cb unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9) STA 5c:da:d4:d9:25:f2 sent probe request for our SSID mgmt::proberesp cb unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9) STA 5c:da:d4:d9:25:f2 sent probe request for our SSID mgmt::proberesp cb unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9) STA 5c:da:d4:d9:25:f2 sent probe request for broadcast SSID mgmt::proberesp cb unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9) STA 5c:da:d4:d9:25:f2 sent probe request for broadcast SSID mgmt::proberesp cb unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9) STA 5c:da:d4:d9:25:f2 sent probe request for broadcast SSID mgmt::proberesp cb unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9) STA 5c:da:d4:d9:25:f2 sent probe request for broadcast SSID mgmt::proberesp cb unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9) STA 5c:da:d4:d9:25:f2 sent probe request for our SSID mgmt::proberesp cb unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9) STA 5c:da:d4:d9:25:f2 sent probe request for our SSID mgmt::proberesp cb unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9) STA 5c:da:d4:d9:25:f2 sent probe request for our SSID mgmt::proberesp cb unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9) STA 5c:da:d4:d9:25:f2 sent probe request for our SSID mgmt::proberesp cb unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9) STA 5c:da:d4:d9:25:f2 sent probe request for our SSID mgmt::proberesp cb unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9) STA 5c:da:d4:d9:25:f2 sent probe request for our SSID mgmt::proberesp cb mgmt::auth authentication: STA=5c:da:d4:d9:25:f2 auth_alg=0 auth_transaction=1 status_code=0 wep=0 New STA wlan0: STA 5c:da:d4:d9:25:f2 IEEE 802.11: authentication OK (open system) wlan0: STA 5c:da:d4:d9:25:f2 MLME: MLME-AUTHENTICATE.indication(5c:da:d4:d9:25:f2, OPEN_SYSTEM) wlan0: STA 5c:da:d4:d9:25:f2 MLME: MLME-DELETEKEYS.request(5c:da:d4:d9:25:f2) authentication reply: STA=5c:da:d4:d9:25:f2 auth_alg=0 auth_transaction=2 resp=0 (IE len=0) mgmt::auth cb wlan0: STA 5c:da:d4:d9:25:f2 IEEE 802.11: authenticated mgmt::reassoc_req reassociation request: STA=5c:da:d4:d9:25:f2 capab_info=0x431 listen_interval=10 current_ap=1c:4b:d6:e7:8c:f8 unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9) WMM IE - hexdump(len=7): 00 50 f2 02 00 01 00 Validating WMM IE: OUI 00:50:f2 OUI type 2 OUI sub-type 0 version 1 QoS info 0x0 new AID 1 wlan0: STA 5c:da:d4:d9:25:f2 IEEE 802.11: association OK (aid 1) mgmt::reassoc_resp cb wlan0: STA 5c:da:d4:d9:25:f2 IEEE 802.11: associated (aid 1) wlan0: STA 5c:da:d4:d9:25:f2 MLME: MLME-REASSOCIATE.indication(5c:da:d4:d9:25:f2) wlan0: STA 5c:da:d4:d9:25:f2 MLME: MLME-DELETEKEYS.request(5c:da:d4:d9:25:f2) wpa_driver_nl80211_set_key: ifindex=3 alg=0 addr=0x8c5f588 key_idx=0 set_tx=1 seq_len=0 key_len=0 addr=5c:da:d4:d9:25:f2 wlan0: STA 5c:da:d4:d9:25:f2 WPA: event 1 notification wpa_driver_nl80211_set_key: ifindex=3 alg=0 addr=0x8c5f588 key_idx=0 set_tx=1 seq_len=0 key_len=0 addr=5c:da:d4:d9:25:f2 wlan0: STA 5c:da:d4:d9:25:f2 WPA: start authentication WPA: 5c:da:d4:d9:25:f2 WPA_PTK entering state INITIALIZE wpa_driver_nl80211_set_key: ifindex=3 alg=0 addr=0x8c5f588 key_idx=0 set_tx=1 seq_len=0 key_len=0 addr=5c:da:d4:d9:25:f2 wlan0: STA 5c:da:d4:d9:25:f2 IEEE 802.1X: unauthorizing port WPA: 5c:da:d4:d9:25:f2 WPA_PTK_GROUP entering state IDLE WPA: 5c:da:d4:d9:25:f2 WPA_PTK entering state AUTHENTICATION WPA: 5c:da:d4:d9:25:f2 WPA_PTK entering state AUTHENTICATION2 WPA: 5c:da:d4:d9:25:f2 WPA_PTK entering state INITPSK WPA: 5c:da:d4:d9:25:f2 WPA_PTK entering state PTKSTART wlan0: STA 5c:da:d4:d9:25:f2 WPA: sending 1/4 msg of 4-Way Handshake WPA: Send EAPOL(version=2 secure=0 mic=0 ack=1 install=0 pairwise=8 kde_len=0 keyidx=0 encr=0) nl80211: Event message available nl80211: Ignored unknown event (cmd=19) IEEE 802.1X: 5c:da:d4:d9:25:f2 TX status - version=2 type=3 length=95 - ack=1 mgmt::disassoc disassocation: STA=5c:da:d4:d9:25:f2 reason_code=8 AP-STA-DISCONNECTED 5c:da:d4:d9:25:f2 wlan0: STA 5c:da:d4:d9:25:f2 WPA: event 2 notification wpa_driver_nl80211_set_key: ifindex=3 alg=0 addr=0x8c5f588 key_idx=0 set_tx=1 seq_len=0 key_len=0 addr=5c:da:d4:d9:25:f2 WPA: 5c:da:d4:d9:25:f2 WPA_PTK entering state DISCONNECTED WPA: 5c:da:d4:d9:25:f2 WPA_PTK entering state INITIALIZE wpa_driver_nl80211_set_key: ifindex=3 alg=0 addr=0x8c5f588 key_idx=0 set_tx=1 seq_len=0 key_len=0 addr=5c:da:d4:d9:25:f2 wlan0: STA 5c:da:d4:d9:25:f2 IEEE 802.1X: unauthorizing port wlan0: STA 5c:da:d4:d9:25:f2 IEEE 802.11: disassociated wlan0: STA 5c:da:d4:d9:25:f2 MLME: MLME-DISASSOCIATE.indication(5c:da:d4:d9:25:f2, 8) wlan0: STA 5c:da:d4:d9:25:f2 MLME: MLME-DELETEKEYS.request(5c:da:d4:d9:25:f2) wpa_driver_nl80211_set_key: ifindex=3 alg=0 addr=0x8c5f588 key_idx=0 set_tx=1 seq_len=0 key_len=0 addr=5c:da:d4:d9:25:f2 nl80211: Event message available nl80211: Ignored unknown event (cmd=20) wlan0: STA 5c:da:d4:d9:25:f2 WPA: EAPOL-Key timeout Sending deauthentication info to STA 5c:da:d4:d9:25:f2 wlan0: STA 5c:da:d4:d9:25:f2 IEEE 802 ................................................................... On Thu, Dec 15, 2011 at 12:55 PM, Ashwin Mendonca <ashwinloyal@xxxxxxxxx> wrote: > > I tried the bleeding edge build of compat-wireless (compat-wireless-2011-12-14 build) on Linux-3.1.5. It still leads to kernel panic. I manually got the AP up with these steps: > > 1. Removed ip from eth0 > 2. Created a bridge with brctl > 3. Added eth0 to br0 > 4. Ran hostapd with my con file. And it showed this error: > l2_packet_receive - recvfrom: Network is down > 5. Tried to connect my client devices. None were getting authenticated. > 6. I assigned an ip to br0. Client got authenticated. System on AP mode froze. > > My hostapd.conf: > > ################################################ > interface=wlan0 > bridge=br0 > driver=nl80211 > logger_syslog=-1 > logger_syslog_level=2 > logger_stdout=-1 > logger_stdout_level=2 > dump_file=/tmp/hostapd.dump > ctrl_interface=/var/run/hostapd > ctrl_interface_group=0 > ssid=test > hw_mode=g > channel=1 > beacon_int=100 > dtim_period=2 > max_num_sta=255 > rts_threshold=2347 > fragm_threshold=2346 > macaddr_acl=0 > auth_algs=1 > ignore_broadcast_ssid=0 > wmm_enabled=1 > wmm_ac_bk_cwmin=4 > wmm_ac_bk_cwmax=10 > wmm_ac_bk_aifs=7 > wmm_ac_bk_txop_limit=0 > wmm_ac_bk_acm=0 > wmm_ac_be_aifs=3 > wmm_ac_be_cwmin=4 > wmm_ac_be_cwmax=10 > wmm_ac_be_txop_limit=0 > wmm_ac_be_acm=0 > wmm_ac_vi_aifs=2 > wmm_ac_vi_cwmin=3 > wmm_ac_vi_cwmax=4 > wmm_ac_vi_txop_limit=94 > wmm_ac_vi_acm=0 > wmm_ac_vo_aifs=2 > wmm_ac_vo_cwmin=2 > wmm_ac_vo_cwmax=3 > wmm_ac_vo_txop_limit=47 > wmm_ac_vo_acm=0 > eapol_key_index_workaround=0 > eap_server=0 > own_ip_addr=127.0.0.1 > wpa=3 > wpa_passphrase=ashwinalwyn > wpa_key_mgmt=WPA-PSK > wpa_pairwise=TKIP > rsn_pairwise=CCMP > > #################################################### > > hostapd log file: > > ##################################################### > > Configuration file: /home/user/test/hostapd.conf > ctrl_interface_group=0 > nl80211: Register Action command failed: ret=-114 (Operation already in progress) > nl80211: Register Action match - hexdump(len=1): 06 > nl80211: Failed to register Action frame processing - ignore for now > nl80211: Add own interface ifindex 12 > nl80211: Add own interface ifindex 3 > nl80211: New interface mon.wlan0 created: ifindex=13 > nl80211: Add own interface ifindex 13 > nl80211: Adding interface wlan0 into bridge br0 > BSS count 1, BSSID mask 00:00:00:00:00:00 (0 bits) > nl80211: Added 802.11b mode based on 802.11g information > Allowed channel: mode=1 chan=1 freq=2412 MHz max_tx_power=14 dBm > Allowed channel: mode=1 chan=2 freq=2417 MHz max_tx_power=14 dBm > Allowed channel: mode=1 chan=3 freq=2422 MHz max_tx_power=14 dBm > Allowed channel: mode=1 chan=4 freq=2427 MHz max_tx_power=14 dBm > Allowed channel: mode=1 chan=5 freq=2432 MHz max_tx_power=14 dBm > Allowed channel: mode=1 chan=6 freq=2437 MHz max_tx_power=14 dBm > Allowed channel: mode=1 chan=7 freq=2442 MHz max_tx_power=14 dBm > Allowed channel: mode=1 chan=8 freq=2447 MHz max_tx_power=14 dBm > Allowed channel: mode=1 chan=9 freq=2452 MHz max_tx_power=14 dBm > Allowed channel: mode=1 chan=10 freq=2457 MHz max_tx_power=14 dBm > Allowed channel: mode=1 chan=11 freq=2462 MHz max_tx_power=14 dBm > Allowed channel: mode=0 chan=1 freq=2412 MHz max_tx_power=14 dBm > Allowed channel: mode=0 chan=2 freq=2417 MHz max_tx_power=14 dBm > Allowed channel: mode=0 chan=3 freq=2422 MHz max_tx_power=14 dBm > Allowed channel: mode=0 chan=4 freq=2427 MHz max_tx_power=14 dBm > Allowed channel: mode=0 chan=5 freq=2432 MHz max_tx_power=14 dBm > Allowed channel: mode=0 chan=6 freq=2437 MHz max_tx_power=14 dBm > Allowed channel: mode=0 chan=7 freq=2442 MHz max_tx_power=14 dBm > Allowed channel: mode=0 chan=8 freq=2447 MHz max_tx_power=14 dBm > Allowed channel: mode=0 chan=9 freq=2452 MHz max_tx_power=14 dBm > Allowed channel: mode=0 chan=10 freq=2457 MHz max_tx_power=14 dBm > Allowed channel: mode=0 chan=11 freq=2462 MHz max_tx_power=14 dBm > RATE[0] rate=10 flags=0x1 > RATE[1] rate=20 flags=0x1 > RATE[2] rate=55 flags=0x1 > RATE[3] rate=110 flags=0x1 > RATE[4] rate=60 flags=0x0 > RATE[5] rate=90 flags=0x0 > RATE[6] rate=120 flags=0x0 > RATE[7] rate=180 flags=0x0 > RATE[8] rate=240 flags=0x0 > RATE[9] rate=360 flags=0x0 > RATE[10] rate=480 flags=0x0 > RATE[11] rate=540 flags=0x0 > Completing interface initialization > Mode: IEEE 802.11g Channel: 1 Frequency: 2412 MHz > Flushing old station entries > Deauthenticate all stations > wpa_driver_nl80211_set_key: ifindex=3 alg=0 addr=(nil) key_idx=0 set_tx=1 seq_len=0 key_len=0 > wpa_driver_nl80211_set_key: ifindex=3 alg=0 addr=(nil) key_idx=1 set_tx=0 seq_len=0 key_len=0 > wpa_driver_nl80211_set_key: ifindex=3 alg=0 addr=(nil) key_idx=2 set_tx=0 seq_len=0 key_len=0 > wpa_driver_nl80211_set_key: ifindex=3 alg=0 addr=(nil) key_idx=3 set_tx=0 seq_len=0 key_len=0 > Using interface wlan0 with hwaddr 1c:4b:d6:e7:8c:f8 and ssid 'test' > Deriving WPA PSK based on passphrase > SSID - hexdump_ascii(len=4): > 74 65 73 74 test > PSK (ASCII passphrase) - hexdump_ascii(len=11): [REMOVED] > PSK (from passphrase) - hexdump(len=32): [REMOVED] > WPA: group state machine entering state GTK_INIT (VLAN-ID 0) > GMK - hexdump(len=32): [REMOVED] > GTK - hexdump(len=32): [REMOVED] > WPA: group state machine entering state SETKEYSDONE (VLAN-ID 0) > wpa_driver_nl80211_set_key: ifindex=3 alg=2 addr=(nil) key_idx=1 set_tx=1 seq_len=0 key_len=32 > nl80211: Set beacon (beacon_set=0) > wlan0: Setup of interface done. > RTM_NEWLINK: operstate=0 ifi_flags=0x1002 () > RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added > Unknown event 5 > RTM_NEWLINK: operstate=0 ifi_flags=0x1002 () > RTM_NEWLINK, IFLA_IFNAME: Interface 'mon.wlan0' added > Unknown event 5 > RTM_NEWLINK: operstate=0 ifi_flags=0x11043 ([UP][RUNNING][LOWER_UP]) > RTM_NEWLINK, IFLA_IFNAME: Interface 'mon.wlan0' added > Unknown event 5 > RTM_NEWLINK: operstate=0 ifi_flags=0x1002 () > RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added > Unknown event 5 > nl80211: Add ifindex 12 for bridge br0 > nl80211: Add own interface ifindex 12 > RTM_NEWLINK: operstate=0 ifi_flags=0x1002 () > RTM_NEWLINK, IFLA_IFNAME: Interface 'br0' added > Unknown event 5 > RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP]) > RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added > Unknown event 5 > RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP]) > RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added > Unknown event 5 > nl80211: Add ifindex 12 for bridge br0 > nl80211: Add own interface ifindex 12 > RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP]) > RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added > Unknown event 5 > nl80211: Add ifindex 12 for bridge br0 > nl80211: Add own interface ifindex 12 > RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP]) > RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added > Unknown event 5 > unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9) > STA 5c:da:d4:d9:25:f2 sent probe request for broadcast SSID > mgmt::proberesp cb > unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9) > STA 5c:da:d4:d9:25:f2 sent probe request for broadcast SSID > mgmt::proberesp cb > unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9) > STA 5c:da:d4:d9:25:f2 sent probe request for broadcast SSID > mgmt::proberesp cb > unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9) > STA 5c:da:d4:d9:25:f2 sent probe request for broadcast SSID > mgmt::proberesp cb > unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9) > STA 5c:da:d4:d9:25:f2 sent probe request for broadcast SSID > mgmt::proberesp cb > unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9) > STA 5c:da:d4:d9:25:f2 sent probe request for our SSID > mgmt::proberesp cb > unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9) > STA 5c:da:d4:d9:25:f2 sent probe request for our SSID > mgmt::proberesp cb > unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9) > STA 5c:da:d4:d9:25:f2 sent probe request for our SSID > mgmt::proberesp cb > unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9) > STA 5c:da:d4:d9:25:f2 sent probe request for our SSID > mgmt::proberesp cb > unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9) > STA 5c:da:d4:d9:25:f2 sent probe request for our SSID > mgmt::proberesp cb > unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9) > STA 5c:da:d4:d9:25:f2 sent probe request for our SSID > mgmt::proberesp cb > unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9) > STA 5c:da:d4:d9:25:f2 sent probe request for our SSID > mgmt::proberesp cb > mgmt::auth > authentication: STA=5c:da:d4:d9:25:f2 auth_alg=0 auth_transaction=1 status_code=0 wep=0 > New STA > wlan0: STA 5c:da:d4:d9:25:f2 IEEE 802.11: authentication OK (open system) > wlan0: STA 5c:da:d4:d9:25:f2 MLME: MLME-AUTHENTICATE.indication(5c:da:d4:d9:25:f2, OPEN_SYSTEM) > wlan0: STA 5c:da:d4:d9:25:f2 MLME: MLME-DELETEKEYS.request(5c:da:d4:d9:25:f2) > authentication reply: STA=5c:da:d4:d9:25:f2 auth_alg=0 auth_transaction=2 resp=0 (IE len=0) > mgmt::auth cb > wlan0: STA 5c:da:d4:d9:25:f2 IEEE 802.11: authenticated > mgmt::assoc_req > association request: STA=5c:da:d4:d9:25:f2 capab_info=0x431 listen_interval=10 > unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9) > WMM IE - hexdump(len=7): 00 50 f2 02 00 01 00 > Validating WMM IE: OUI 00:50:f2 OUI type 2 OUI sub-type 0 version 1 QoS info 0x0 > new AID 1 > wlan0: STA 5c:da:d4:d9:25:f2 IEEE 802.11: association OK (aid 1) > mgmt::assoc_resp cb > wlan0: STA 5c:da:d4:d9:25:f2 IEEE 802.11: associated (aid 1) > wlan0: STA 5c:da:d4:d9:25:f2 MLME: MLME-ASSOCIATE.indication(5c:da:d4:d9:25:f2) > wlan0: STA 5c:da:d4:d9:25:f2 MLME: MLME-DELETEKEYS.request(5c:da:d4:d9:25:f2) > wpa_driver_nl80211_set_key: ifindex=3 alg=0 addr=0x8c5f588 key_idx=0 set_tx=1 seq_len=0 key_len=0 > addr=5c:da:d4:d9:25:f2 > wlan0: STA 5c:da:d4:d9:25:f2 WPA: event 1 notification > wpa_driver_nl80211_set_key: ifindex=3 alg=0 addr=0x8c5f588 key_idx=0 set_tx=1 seq_len=0 key_len=0 > addr=5c:da:d4:d9:25:f2 > wlan0: STA 5c:da:d4:d9:25:f2 WPA: start authentication > WPA: 5c:da:d4:d9:25:f2 WPA_PTK entering state INITIALIZE > wpa_driver_nl80211_set_key: ifindex=3 alg=0 addr=0x8c5f588 key_idx=0 set_tx=1 seq_len=0 key_len=0 > addr=5c:da:d4:d9:25:f2 > wlan0: STA 5c:da:d4:d9:25:f2 IEEE 802.1X: unauthorizing port > WPA: 5c:da:d4:d9:25:f2 WPA_PTK_GROUP entering state IDLE > WPA: 5c:da:d4:d9:25:f2 WPA_PTK entering state AUTHENTICATION > WPA: 5c:da:d4:d9:25:f2 WPA_PTK entering state AUTHENTICATION2 > WPA: 5c:da:d4:d9:25:f2 WPA_PTK entering state INITPSK > WPA: 5c:da:d4:d9:25:f2 WPA_PTK entering state PTKSTART > wlan0: STA 5c:da:d4:d9:25:f2 WPA: sending 1/4 msg of 4-Way Handshake > WPA: Send EAPOL(version=2 secure=0 mic=0 ack=1 install=0 pairwise=8 kde_len=0 keyidx=0 encr=0) > nl80211: Event message available > nl80211: Ignored unknown event (cmd=19) > IEEE 802.1X: 5c:da:d4:d9:25:f2 TX status - version=2 type=3 length=95 - ack=1 > wlan0: STA 5c:da:d4:d9:25:f2 WPA: EAPOL-Key timeout > WPA: 5c:da:d4:d9:25:f2 WPA_PTK entering state PTKSTART > wlan0: STA 5c:da:d4:d9:25:f2 WPA: sending 1/4 msg of 4-Way Handshake > WPA: Send EAPOL(version=2 secure=0 mic=0 ack=1 install=0 pairwise=8 kde_len=0 keyidx=0 encr=0) > IEEE 802.1X: 5c:da:d4:d9:25:f2 TX status - version=2 type=3 length=95 - ack=1 > wlan0: STA 5c:da:d4:d9:25:f2 WPA: EAPOL-Key timeout > WPA: 5c:da:d4:d9:25:f2 WPA_PTK entering state PTKSTART > wlan0: STA 5c:da:d4:d9:25:f2 WPA: sending 1/4 msg of 4-Way Handshake > WPA: Send EAPOL(version=2 secure=0 mic=0 ack=1 install=0 pairwise=8 kde_len=0 keyidx=0 encr=0) > IEEE 802.1X: 5c:da:d4:d9:25:f2 TX status - version=2 type=3 length=95 - ack=1 > wlan0: STA 5c:da:d4:d9:25:f2 WPA: EAPOL-Key timeout > WPA: 5c:da:d4:d9:25:f2 WPA_PTK entering state PTKSTART > wlan0: STA 5c:da:d4:d9:25:f2 WPA: sending 1/4 msg of 4-Way Handshake > WPA: Send EAPOL(version=2 secure=0 mic=0 ack=1 install=0 pairwise=8 kde_len=0 keyidx=0 encr=0) > IEEE 802.1X: 5c:da:d4:d9:25:f2 TX status - version=2 type=3 length=95 - ack=1 > wlan0: STA 5c:da:d4:d9:25:f2 WPA: EAPOL-Key timeout > WPA: 5c:da:d4:d9:25:f2 WPA_PTK entering state PTKSTART > WPA: 5c:da:d4:d9:25:f2 WPA_PTK entering state DISCONNECT > hostapd_wpa_auth_disconnect: WPA authenticator requests disconnect: STA 5c:da:d4:d9:25:f2 reason 2 > WPA: 5c:da:d4:d9:25:f2 WPA_PTK entering state DISCONNECTED > WPA: 5c:da:d4:d9:25:f2 WPA_PTK entering state INITIALIZE > wpa_driver_nl80211_set_key: ifindex=3 alg=0 addr=0x8c5f588 key_idx=0 set_tx=1 seq_len=0 key_len=0 > addr=5c:da:d4:d9:25:f2 > wlan0: STA 5c:da:d4:d9:25:f2 IEEE 802.1X: unauthorizing port > wlan0: STA 5c:da:d4:d9:25:f2 IEEE 802.11: deauthenticated due to local deauth request > nl80211: Event message available > nl80211: Ignored unknown event (cmd=20) > unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9) > STA 5c:da:d4:d9:25:f2 sent probe request for our SSID > mgmt::proberesp cb > unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9) > STA 5c:da:d4:d9:25:f2 sent probe request for our SSID > mgmt::proberesp cb > unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9) > STA 5c:da:d4:d9:25:f2 sent probe request for our SSID > mgmt::proberesp cb > unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9) > STA 5c:da:d4:d9:25:f2 sent probe request for broadcast SSID > mgmt::proberesp cb > unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9) > STA 5c:da:d4:d9:25:f2 sent probe request for broadcast SSID > mgmt::proberesp cb > unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9) > STA 5c:da:d4:d9:25:f2 sent probe request for broadcast SSID > mgmt::proberesp cb > unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9) > STA 5c:da:d4:d9:25:f2 sent probe request for broadcast SSID > mgmt::proberesp cb > unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9) > STA 5c:da:d4:d9:25:f2 sent probe request for our SSID > mgmt::proberesp cb > unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9) > STA 5c:da:d4:d9:25:f2 sent probe request for our SSID > mgmt::proberesp cb > unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9) > STA 5c:da:d4:d9:25:f2 sent probe request for our SSID > mgmt::proberesp cb > unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9) > STA 5c:da:d4:d9:25:f2 sent probe request for our SSID > mgmt::proberesp cb > unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9) > STA 5c:da:d4:d9:25:f2 sent probe request for our SSID > mgmt::proberesp cb > unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9) > STA 5c:da:d4:d9:25:f2 sent probe request for our SSID > mgmt::proberesp cb > mgmt::auth > authentication: STA=5c:da:d4:d9:25:f2 auth_alg=0 auth_transaction=1 status_code=0 wep=0 > New STA > wlan0: STA 5c:da:d4:d9:25:f2 IEEE 802.11: authentication OK (open system) > wlan0: STA 5c:da:d4:d9:25:f2 MLME: MLME-AUTHENTICATE.indication(5c:da:d4:d9:25:f2, OPEN_SYSTEM) > wlan0: STA 5c:da:d4:d9:25:f2 MLME: MLME-DELETEKEYS.request(5c:da:d4:d9:25:f2) > authentication reply: STA=5c:da:d4:d9:25:f2 auth_alg=0 auth_transaction=2 resp=0 (IE len=0) > mgmt::auth cb > wlan0: STA 5c:da:d4:d9:25:f2 IEEE 802.11: authenticated > mgmt::reassoc_req > reassociation request: STA=5c:da:d4:d9:25:f2 capab_info=0x431 listen_interval=10 current_ap=1c:4b:d6:e7:8c:f8 > unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9) > WMM IE - hexdump(len=7): 00 50 f2 02 00 01 00 > Validating WMM IE: OUI 00:50:f2 OUI type 2 OUI sub-type 0 version 1 QoS info 0x0 > new AID 1 > wlan0: STA 5c:da:d4:d9:25:f2 IEEE 802.11: association OK (aid 1) > mgmt::reassoc_resp cb > wlan0: STA 5c:da:d4:d9:25:f2 IEEE 802.11: associated (aid 1) > wlan0: STA 5c:da:d4:d9:25:f2 MLME: MLME-REASSOCIATE.indication(5c:da:d4:d9:25:f2) > wlan0: STA 5c:da:d4:d9:25:f2 MLME: MLME-DELETEKEYS.request(5c:da:d4:d9:25:f2) > wpa_driver_nl80211_set_key: ifindex=3 alg=0 addr=0x8c5f588 key_idx=0 set_tx=1 seq_len=0 key_len=0 > addr=5c:da:d4:d9:25:f2 > wlan0: STA 5c:da:d4:d9:25:f2 WPA: event 1 notification > wpa_driver_nl80211_set_key: ifindex=3 alg=0 addr=0x8c5f588 key_idx=0 set_tx=1 seq_len=0 key_len=0 > addr=5c:da:d4:d9:25:f2 > wlan0: STA 5c:da:d4:d9:25:f2 WPA: start authentication > WPA: 5c:da:d4:d9:25:f2 WPA_PTK entering state INITIALIZE > wpa_driver_nl80211_set_key: ifindex=3 alg=0 addr=0x8c5f588 key_idx=0 set_tx=1 seq_len=0 key_len=0 > addr=5c:da:d4:d9:25:f2 > wlan0: STA 5c:da:d4:d9:25:f2 IEEE 802.1X: unauthorizing port > WPA: 5c:da:d4:d9:25:f2 WPA_PTK_GROUP entering state IDLE > WPA: 5c:da:d4:d9:25:f2 WPA_PTK entering state AUTHENTICATION > WPA: 5c:da:d4:d9:25:f2 WPA_PTK entering state AUTHENTICATION2 > WPA: 5c:da:d4:d9:25:f2 WPA_PTK entering state INITPSK > WPA: 5c:da:d4:d9:25:f2 WPA_PTK entering state PTKSTART > wlan0: STA 5c:da:d4:d9:25:f2 WPA: sending 1/4 msg of 4-Way Handshake > WPA: Send EAPOL(version=2 secure=0 mic=0 ack=1 install=0 pairwise=8 kde_len=0 keyidx=0 encr=0) > nl80211: Event message available > nl80211: Ignored unknown event (cmd=19) > IEEE 802.1X: 5c:da:d4:d9:25:f2 TX status - version=2 type=3 length=95 - ack=1 > mgmt::disassoc > disassocation: STA=5c:da:d4:d9:25:f2 reason_code=8 > AP-STA-DISCONNECTED 5c:da:d4:d9:25:f2 > wlan0: STA 5c:da:d4:d9:25:f2 WPA: event 2 notification > wpa_driver_nl80211_set_key: ifindex=3 alg=0 addr=0x8c5f588 key_idx=0 set_tx=1 seq_len=0 key_len=0 > addr=5c:da:d4:d9:25:f2 > WPA: 5c:da:d4:d9:25:f2 WPA_PTK entering state DISCONNECTED > WPA: 5c:da:d4:d9:25:f2 WPA_PTK entering state INITIALIZE > wpa_driver_nl80211_set_key: ifindex=3 alg=0 addr=0x8c5f588 key_idx=0 set_tx=1 seq_len=0 key_len=0 > addr=5c:da:d4:d9:25:f2 > wlan0: STA 5c:da:d4:d9:25:f2 IEEE 802.1X: unauthorizing port > wlan0: STA 5c:da:d4:d9:25:f2 IEEE 802.11: disassociated > wlan0: STA 5c:da:d4:d9:25:f2 MLME: MLME-DISASSOCIATE.indication(5c:da:d4:d9:25:f2, 8) > wlan0: STA 5c:da:d4:d9:25:f2 MLME: MLME-DELETEKEYS.request(5c:da:d4:d9:25:f2) > wpa_driver_nl80211_set_key: ifindex=3 alg=0 addr=0x8c5f588 key_idx=0 set_tx=1 seq_len=0 key_len=0 > addr=5c:da:d4:d9:25:f2 > nl80211: Event message available > nl80211: Ignored unknown event (cmd=20) > wlan0: STA 5c:da:d4:d9:25:f2 WPA: EAPOL-Key timeout > Sending deauthentication info to STA 5c:da:d4:d9:25:f2 > wlan0: STA 5c:da:d4:d9:25:f2 IEEE 802 > > ##################################################### > > > On Thu, Dec 15, 2011 at 11:18 AM, Mohammed Shafi <shafi.wireless@xxxxxxxxx> wrote: >> >> On Wed, Dec 14, 2011 at 10:53 PM, Ashwin Mendonca <ashwinloyal@xxxxxxxxx> wrote: >> > I can enable AP mode on my netbook. But when I turn on a wireless >> > client device, then the sytem on AP mode freezes. It has happened >> > since 2.3.38. When I installaed ath9k driver compiled from >> > compat-wireless on linux 2.3.38, the issue got disappered. But the >> > ath9k driver packed with the kernel still has the issue. On Ubuntu >> > 11.10, all linux 3.0 releases (the current stable release Ubuntu >> > 3.0.14) have the issue. I compiled 3.1.5 stable kernel from sources, >> > which also has the issue. I recently compiled >> > compat-wireless-3.2-rc1-1, which also got my system frozen. This is >> > the bug that I filled at Launchpad: >> > https://bugs.launchpad.net/ubuntu/+source/linux/+bug/875503 >> >> some time back the STA mode itself had this issue, but was fixed by >> https://lkml.org/lkml/2011/4/12/269 >> could you please let us know whether this issue happens in >> http://linuxwireless.org/en/users/Download#Where_to_download_bleeding_edge >> >> i just tried to put AR2427 in AP mode and then connected a STA, did >> not seem to cause any issue in 3.2.0-rc5-wl. please also post your >> hostapd.conf and your hostapd --version >> >> >> > -- >> > To unsubscribe from this list: send the line "unsubscribe linux-wireless" in >> > the body of a message to majordomo@xxxxxxxxxxxxxxx >> > More majordomo info at http://vger.kernel.org/majordomo-info.html >> >> >> >> -- >> shafi > > -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
