On Wed, Nov 23, 2011 at 9:05 AM, Stanislaw Gruszka <sgruszka@xxxxxxxxxx> wrote: > On Tue, Nov 22, 2011 at 04:49:40PM -0500, John W. Linville wrote: >> On Wed, Nov 16, 2011 at 11:09:17AM +0100, Stanislaw Gruszka wrote: >> Perhaps there is some way to convince the hardware not to generate >> spurious interrupts? > > Ivo, Gertjan, Helmut, is there a possibility that I can get hardware > documentation or any other support from Ralink, that could help to > solve this (and possible other issues)? There is sort of documentation for this hardware but not freely available :( Are we 100% sure that the rt2800pci device is generating the interrupts? Just a shot in the dark but instead of masking out interrupts we don't handle just enable all device interrupts. Mind to try the below patch? Helmut --- diff --git a/drivers/net/wireless/rt2x00/rt2800pci.c b/drivers/net/wireless/rt2x00/rt2800pci.c index 4dc2d0f..c0badec 100644 --- a/drivers/net/wireless/rt2x00/rt2800pci.c +++ b/drivers/net/wireless/rt2x00/rt2800pci.c @@ -437,24 +437,24 @@ static void rt2800pci_toggle_irq(struct rt2x00_dev *rt2x00dev, spin_lock_irqsave(&rt2x00dev->irqmask_lock, flags); rt2x00pci_register_read(rt2x00dev, INT_MASK_CSR, ®); - rt2x00_set_field32(®, INT_MASK_CSR_RXDELAYINT, 0); - rt2x00_set_field32(®, INT_MASK_CSR_TXDELAYINT, 0); + rt2x00_set_field32(®, INT_MASK_CSR_RXDELAYINT, mask); + rt2x00_set_field32(®, INT_MASK_CSR_TXDELAYINT, mask); rt2x00_set_field32(®, INT_MASK_CSR_RX_DONE, mask); - rt2x00_set_field32(®, INT_MASK_CSR_AC0_DMA_DONE, 0); - rt2x00_set_field32(®, INT_MASK_CSR_AC1_DMA_DONE, 0); - rt2x00_set_field32(®, INT_MASK_CSR_AC2_DMA_DONE, 0); - rt2x00_set_field32(®, INT_MASK_CSR_AC3_DMA_DONE, 0); - rt2x00_set_field32(®, INT_MASK_CSR_HCCA_DMA_DONE, 0); - rt2x00_set_field32(®, INT_MASK_CSR_MGMT_DMA_DONE, 0); - rt2x00_set_field32(®, INT_MASK_CSR_MCU_COMMAND, 0); - rt2x00_set_field32(®, INT_MASK_CSR_RXTX_COHERENT, 0); + rt2x00_set_field32(®, INT_MASK_CSR_AC0_DMA_DONE, mask); + rt2x00_set_field32(®, INT_MASK_CSR_AC1_DMA_DONE, mask); + rt2x00_set_field32(®, INT_MASK_CSR_AC2_DMA_DONE, mask); + rt2x00_set_field32(®, INT_MASK_CSR_AC3_DMA_DONE, mask); + rt2x00_set_field32(®, INT_MASK_CSR_HCCA_DMA_DONE, mask); + rt2x00_set_field32(®, INT_MASK_CSR_MGMT_DMA_DONE, mask); + rt2x00_set_field32(®, INT_MASK_CSR_MCU_COMMAND, mask); + rt2x00_set_field32(®, INT_MASK_CSR_RXTX_COHERENT, mask); rt2x00_set_field32(®, INT_MASK_CSR_TBTT, mask); rt2x00_set_field32(®, INT_MASK_CSR_PRE_TBTT, mask); rt2x00_set_field32(®, INT_MASK_CSR_TX_FIFO_STATUS, mask); rt2x00_set_field32(®, INT_MASK_CSR_AUTO_WAKEUP, mask); - rt2x00_set_field32(®, INT_MASK_CSR_GPTIMER, 0); - rt2x00_set_field32(®, INT_MASK_CSR_RX_COHERENT, 0); - rt2x00_set_field32(®, INT_MASK_CSR_TX_COHERENT, 0); + rt2x00_set_field32(®, INT_MASK_CSR_GPTIMER, mask); + rt2x00_set_field32(®, INT_MASK_CSR_RX_COHERENT, mask); + rt2x00_set_field32(®, INT_MASK_CSR_TX_COHERENT, mask); rt2x00pci_register_write(rt2x00dev, INT_MASK_CSR, reg); spin_unlock_irqrestore(&rt2x00dev->irqmask_lock, flags); -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
