The BT coex params api have been changed.
Update it, and init coex for both sta and ap.
Signed-off-by: Eliad Peller <eliad@xxxxxxxxxx>
---
drivers/net/wireless/wl12xx/acx.c | 40 +----
drivers/net/wireless/wl12xx/acx.h | 16 +--
drivers/net/wireless/wl12xx/conf.h | 314 ++++++++++++------------------------
drivers/net/wireless/wl12xx/init.c | 10 +-
drivers/net/wireless/wl12xx/main.c | 165 +++++++------------
5 files changed, 175 insertions(+), 370 deletions(-)
diff --git a/drivers/net/wireless/wl12xx/acx.c b/drivers/net/wireless/wl12xx/acx.c
index bb2e4fc..6885568 100644
--- a/drivers/net/wireless/wl12xx/acx.c
+++ b/drivers/net/wireless/wl12xx/acx.c
@@ -525,59 +525,29 @@ int wl1271_acx_sg_enable(struct wl1271 *wl, bool enable)
out:
kfree(pta);
return ret;
}
-int wl1271_acx_sta_sg_cfg(struct wl1271 *wl)
+int wl1271_acx_sg_cfg(struct wl1271 *wl)
{
- struct acx_sta_bt_wlan_coex_param *param;
+ struct acx_bt_wlan_coex_param *param;
struct conf_sg_settings *c = &wl->conf.sg;
int i, ret;
- wl1271_debug(DEBUG_ACX, "acx sg sta cfg");
+ wl1271_debug(DEBUG_ACX, "acx sg cfg");
param = kzalloc(sizeof(*param), GFP_KERNEL);
if (!param) {
ret = -ENOMEM;
goto out;
}
/* BT-WLAN coext parameters */
- for (i = 0; i < CONF_SG_STA_PARAMS_MAX; i++)
- param->params[i] = cpu_to_le32(c->sta_params[i]);
- param->param_idx = CONF_SG_PARAMS_ALL;
-
- ret = wl1271_cmd_configure(wl, ACX_SG_CFG, param, sizeof(*param));
- if (ret < 0) {
- wl1271_warning("failed to set sg config: %d", ret);
- goto out;
- }
-
-out:
- kfree(param);
- return ret;
-}
-
-int wl1271_acx_ap_sg_cfg(struct wl1271 *wl)
-{
- struct acx_ap_bt_wlan_coex_param *param;
- struct conf_sg_settings *c = &wl->conf.sg;
- int i, ret;
-
- wl1271_debug(DEBUG_ACX, "acx sg ap cfg");
-
- param = kzalloc(sizeof(*param), GFP_KERNEL);
- if (!param) {
- ret = -ENOMEM;
- goto out;
- }
-
- /* BT-WLAN coext parameters */
- for (i = 0; i < CONF_SG_AP_PARAMS_MAX; i++)
- param->params[i] = cpu_to_le32(c->ap_params[i]);
+ for (i = 0; i < CONF_SG_PARAMS_MAX; i++)
+ param->params[i] = cpu_to_le32(c->params[i]);
param->param_idx = CONF_SG_PARAMS_ALL;
ret = wl1271_cmd_configure(wl, ACX_SG_CFG, param, sizeof(*param));
if (ret < 0) {
wl1271_warning("failed to set sg config: %d", ret);
goto out;
diff --git a/drivers/net/wireless/wl12xx/acx.h b/drivers/net/wireless/wl12xx/acx.h
index 2ea71d1..ac6194e 100644
--- a/drivers/net/wireless/wl12xx/acx.h
+++ b/drivers/net/wireless/wl12xx/acx.h
@@ -297,29 +297,20 @@ struct acx_bt_wlan_coex {
struct acx_header header;
u8 enable;
u8 pad[3];
} __packed;
-struct acx_sta_bt_wlan_coex_param {
+struct acx_bt_wlan_coex_param {
struct acx_header header;
- __le32 params[CONF_SG_STA_PARAMS_MAX];
+ __le32 params[CONF_SG_PARAMS_MAX];
u8 param_idx;
u8 padding[3];
} __packed;
-struct acx_ap_bt_wlan_coex_param {
- struct acx_header header;
-
- __le32 params[CONF_SG_AP_PARAMS_MAX];
- u8 param_idx;
- u8 padding[3];
-} __packed;
-
-
struct acx_dco_itrim_params {
struct acx_header header;
u8 enable;
u8 padding[3];
__le32 timeout;
@@ -1267,14 +1258,13 @@ int wl1271_acx_service_period_timeout(struct wl1271 *wl);
int wl1271_acx_rts_threshold(struct wl1271 *wl, u32 rts_threshold);
int wl1271_acx_dco_itrim_params(struct wl1271 *wl);
int wl1271_acx_beacon_filter_opt(struct wl1271 *wl, bool enable_filter);
int wl1271_acx_beacon_filter_table(struct wl1271 *wl);
int wl1271_acx_conn_monit_params(struct wl1271 *wl, bool enable);
int wl1271_acx_sg_enable(struct wl1271 *wl, bool enable);
-int wl1271_acx_sta_sg_cfg(struct wl1271 *wl);
-int wl1271_acx_ap_sg_cfg(struct wl1271 *wl);
+int wl1271_acx_sg_cfg(struct wl1271 *wl);
int wl1271_acx_cca_threshold(struct wl1271 *wl);
int wl1271_acx_bcn_dtim_options(struct wl1271 *wl);
int wl1271_acx_aid(struct wl1271 *wl, u16 aid);
int wl1271_acx_event_mbox_mask(struct wl1271 *wl, u32 event_mask);
int wl1271_acx_set_preamble(struct wl1271 *wl, enum acx_preamble_type preamble);
int wl1271_acx_cts_protect(struct wl1271 *wl,
diff --git a/drivers/net/wireless/wl12xx/conf.h b/drivers/net/wireless/wl12xx/conf.h
index ebc8c6b..e3a6b28 100644
--- a/drivers/net/wireless/wl12xx/conf.h
+++ b/drivers/net/wireless/wl12xx/conf.h
@@ -96,46 +96,81 @@ enum {
CONF_SG_PROTECTIVE,
CONF_SG_OPPORTUNISTIC
};
enum {
/*
- * PER threshold in PPM of the BT voice
+ * Configure the min and max time BT gains the antenna
+ * in WLAN / BT master basic rate
*
- * Range: 0 - 10000000
+ * Range: 0 - 255 (ms)
*/
- CONF_SG_BT_PER_THRESHOLD = 0,
+ CONF_SG_ACL_BT_MASTER_MIN_BR = 0,
+ CONF_SG_ACL_BT_MASTER_MAX_BR,
/*
- * Number of consequent RX_ACTIVE activities to override BT voice
- * frames to ensure WLAN connection
+ * Configure the min and max time BT gains the antenna
+ * in WLAN / BT slave basic rate
*
- * Range: 0 - 100
+ * Range: 0 - 255 (ms)
*/
- CONF_SG_HV3_MAX_OVERRIDE,
+ CONF_SG_ACL_BT_SLAVE_MIN_BR,
+ CONF_SG_ACL_BT_SLAVE_MAX_BR,
/*
- * Defines the PER threshold of the BT voice
+ * Configure the min and max time BT gains the antenna
+ * in WLAN / BT master EDR
*
- * Range: 0 - 65000
+ * Range: 0 - 255 (ms)
*/
- CONF_SG_BT_NFS_SAMPLE_INTERVAL,
+ CONF_SG_ACL_BT_MASTER_MIN_EDR,
+ CONF_SG_ACL_BT_MASTER_MAX_EDR,
/*
- * Defines the load ratio of BT
+ * Configure the min and max time BT gains the antenna
+ * in WLAN / BT slave EDR
*
- * Range: 0 - 100 (%)
+ * Range: 0 - 255 (ms)
*/
- CONF_SG_BT_LOAD_RATIO,
+ CONF_SG_ACL_BT_SLAVE_MIN_EDR,
+ CONF_SG_ACL_BT_SLAVE_MAX_EDR,
/*
- * Defines whether the SG will force WLAN host to enter/exit PSM
+ * The maximum time WLAN can gain the antenna for
+ * in WLAN PSM / BT master/slave BR
*
- * Range: 1 - SG can force, 0 - host handles PSM
+ * Range: 0 - 255 (ms)
*/
- CONF_SG_AUTO_PS_MODE,
+ CONF_SG_ACL_WLAN_PS_MASTER_BR,
+ CONF_SG_ACL_WLAN_PS_SLAVE_BR,
+
+ /*
+ * The maximum time WLAN can gain the antenna for
+ * in WLAN PSM / BT master/slave EDR
+ *
+ * Range: 0 - 255 (ms)
+ */
+ CONF_SG_ACL_WLAN_PS_MASTER_EDR,
+ CONF_SG_ACL_WLAN_PS_SLAVE_EDR,
+
+ /* ??? */
+ CONF_SG_ACL_WLAN_ACTIVE_MASTER_MIN_BR,
+ CONF_SG_ACL_WLAN_ACTIVE_MASTER_MAX_BR,
+ CONF_SG_ACL_WLAN_ACTIVE_SLAVE_MIN_BR,
+ CONF_SG_ACL_WLAN_ACTIVE_SLAVE_MAX_BR,
+ CONF_SG_ACL_WLAN_ACTIVE_MASTER_MIN_EDR,
+ CONF_SG_ACL_WLAN_ACTIVE_MASTER_MAX_EDR,
+ CONF_SG_ACL_WLAN_ACTIVE_SLAVE_MIN_EDR,
+ CONF_SG_ACL_WLAN_ACTIVE_SLAVE_MAX_EDR,
+
+ CONF_SG_ACL_ACTIVE_SCAN_WLAN_BR,
+ CONF_SG_ACL_ACTIVE_SCAN_WLAN_EDR,
+ CONF_SG_ACL_PASSIVE_SCAN_BT_BR,
+ CONF_SG_ACL_PASSIVE_SCAN_WLAN_BR,
+ CONF_SG_ACL_PASSIVE_SCAN_BT_EDR,
+ CONF_SG_ACL_PASSIVE_SCAN_WLAN_EDR,
/*
* Compensation percentage of probe requests when scan initiated
* during BT voice/ACL link.
*
* Range: 0 - 255 (%)
@@ -148,108 +183,76 @@ enum {
*
* Range: 0 - 255 (%)
*/
CONF_SG_ACTIVE_SCAN_DURATION_FACTOR_HV3,
/*
- * Defines antenna configuration (single/dual antenna)
- *
- * Range: 0 - single antenna, 1 - dual antenna
- */
- CONF_SG_ANTENNA_CONFIGURATION,
-
- /*
- * The threshold (percent) of max consequtive beacon misses before
- * increasing priority of beacon reception.
- *
- * Range: 0 - 100 (%)
- */
- CONF_SG_BEACON_MISS_PERCENT,
-
- /*
- * The rate threshold below which receiving a data frame from the AP
- * will increase the priority of the data frame above BT traffic.
- *
- * Range: 0,2, 5(=5.5), 6, 9, 11, 12, 18, 24, 36, 48, 54
- */
- CONF_SG_RATE_ADAPT_THRESH,
-
- /*
- * Not used currently.
+ * Compensation percentage of WLAN active scan window if initiated
+ * during BT A2DP
*
- * Range: 0
+ * Range: 0 - 1000 (%)
*/
- CONF_SG_RATE_ADAPT_SNR,
+ CONF_SG_ACTIVE_SCAN_DURATION_FACTOR_A2DP,
/*
- * Configure the min and max time BT gains the antenna
- * in WLAN PSM / BT master basic rate
+ * Compensation percentage of WLAN passive scan window if initiated
+ * during BT A2DP BR
*
- * Range: 0 - 255 (ms)
+ * Range: 0 - 1000 (%)
*/
- CONF_SG_WLAN_PS_BT_ACL_MASTER_MIN_BR,
- CONF_SG_WLAN_PS_BT_ACL_MASTER_MAX_BR,
+ CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_A2DP_BR,
/*
- * The time after it expires no new WLAN trigger frame is trasmitted
- * in WLAN PSM / BT master basic rate
+ * Compensation percentage of WLAN passive scan window if initiated
+ * during BT A2DP EDR
*
- * Range: 0 - 255 (ms)
+ * Range: 0 - 1000 (%)
*/
- CONF_SG_WLAN_PS_MAX_BT_ACL_MASTER_BR,
+ CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_A2DP_EDR,
/*
- * Configure the min and max time BT gains the antenna
- * in WLAN PSM / BT slave basic rate
+ * Compensation percentage of WLAN passive scan window if initiated
+ * during BT voice
*
- * Range: 0 - 255 (ms)
+ * Range: 0 - 1000 (%)
*/
- CONF_SG_WLAN_PS_BT_ACL_SLAVE_MIN_BR,
- CONF_SG_WLAN_PS_BT_ACL_SLAVE_MAX_BR,
+ CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_HV3,
- /*
- * The time after it expires no new WLAN trigger frame is trasmitted
- * in WLAN PSM / BT slave basic rate
- *
- * Range: 0 - 255 (ms)
- */
- CONF_SG_WLAN_PS_MAX_BT_ACL_SLAVE_BR,
+ /* ??? */
+ CONF_SG_CONSECUTIVE_HV3_IN_PASSIVE_SCAN,
+ CONF_SG_BCN_HV3_COLLISION_THRESH_IN_PASSIVE_SCAN,
+ CONF_SG_TX_RX_PROTECTION_BWIDTH_IN_PASSIVE_SCAN,
/*
- * Configure the min and max time BT gains the antenna
- * in WLAN PSM / BT master EDR
+ * Defines whether the SG will force WLAN host to enter/exit PSM
*
- * Range: 0 - 255 (ms)
+ * Range: 1 - SG can force, 0 - host handles PSM
*/
- CONF_SG_WLAN_PS_BT_ACL_MASTER_MIN_EDR,
- CONF_SG_WLAN_PS_BT_ACL_MASTER_MAX_EDR,
+ CONF_SG_STA_FORCE_PS_IN_BT_SCO,
/*
- * The time after it expires no new WLAN trigger frame is trasmitted
- * in WLAN PSM / BT master EDR
+ * Defines antenna configuration (single/dual antenna)
*
- * Range: 0 - 255 (ms)
+ * Range: 0 - single antenna, 1 - dual antenna
*/
- CONF_SG_WLAN_PS_MAX_BT_ACL_MASTER_EDR,
+ CONF_SG_ANTENNA_CONFIGURATION,
/*
- * Configure the min and max time BT gains the antenna
- * in WLAN PSM / BT slave EDR
+ * The threshold (percent) of max consequtive beacon misses before
+ * increasing priority of beacon reception.
*
- * Range: 0 - 255 (ms)
+ * Range: 0 - 100 (%)
*/
- CONF_SG_WLAN_PS_BT_ACL_SLAVE_MIN_EDR,
- CONF_SG_WLAN_PS_BT_ACL_SLAVE_MAX_EDR,
+ CONF_SG_BEACON_MISS_PERCENT,
/*
- * The time after it expires no new WLAN trigger frame is trasmitted
- * in WLAN PSM / BT slave EDR
+ * Protection time of the DHCP procedure.
*
- * Range: 0 - 255 (ms)
+ * Range: 0 - 100000 (ms)
*/
- CONF_SG_WLAN_PS_MAX_BT_ACL_SLAVE_EDR,
+ CONF_SG_DHCP_TIME,
/*
* RX guard time before the beginning of a new BT voice frame during
* which no new WLAN trigger frame is transmitted.
*
* Range: 0 - 100000 (us)
@@ -270,172 +273,65 @@ enum {
* will be utilized.
*
* Range: 0 - disable, 1 - enable
*/
CONF_SG_ADAPTIVE_RXT_TXT,
- /*
- * The used WLAN legacy service period during active BT ACL link
- *
- * Range: 0 - 255 (ms)
- */
- CONF_SG_PS_POLL_TIMEOUT,
+ /* ??? */
+ CONF_SG_GENERAL_USAGE_BIT_MAP,
/*
- * The used WLAN UPSD service period during active BT ACL link
- *
- * Range: 0 - 255 (ms)
- */
- CONF_SG_UPSD_TIMEOUT,
-
- /*
- * Configure the min and max time BT gains the antenna
- * in WLAN Active / BT master EDR
- *
- * Range: 0 - 255 (ms)
- */
- CONF_SG_WLAN_ACTIVE_BT_ACL_MASTER_MIN_EDR,
- CONF_SG_WLAN_ACTIVE_BT_ACL_MASTER_MAX_EDR,
-
- /*
- * The maximum time WLAN can gain the antenna for
- * in WLAN Active / BT master EDR
- *
- * Range: 0 - 255 (ms)
- */
- CONF_SG_WLAN_ACTIVE_MAX_BT_ACL_MASTER_EDR,
-
- /*
- * Configure the min and max time BT gains the antenna
- * in WLAN Active / BT slave EDR
- *
- * Range: 0 - 255 (ms)
- */
- CONF_SG_WLAN_ACTIVE_BT_ACL_SLAVE_MIN_EDR,
- CONF_SG_WLAN_ACTIVE_BT_ACL_SLAVE_MAX_EDR,
-
- /*
- * The maximum time WLAN can gain the antenna for
- * in WLAN Active / BT slave EDR
+ * Number of consequent BT voice frames not interrupted by WLAN
*
- * Range: 0 - 255 (ms)
+ * Range: 0 - 100
*/
- CONF_SG_WLAN_ACTIVE_MAX_BT_ACL_SLAVE_EDR,
+ CONF_SG_HV3_MAX_SERVED,
/*
- * Configure the min and max time BT gains the antenna
- * in WLAN Active / BT basic rate
+ * The used WLAN legacy service period during active BT ACL link
*
* Range: 0 - 255 (ms)
*/
- CONF_SG_WLAN_ACTIVE_BT_ACL_MIN_BR,
- CONF_SG_WLAN_ACTIVE_BT_ACL_MAX_BR,
+ CONF_SG_PS_POLL_TIMEOUT,
/*
- * The maximum time WLAN can gain the antenna for
- * in WLAN Active / BT basic rate
+ * The used WLAN UPSD service period during active BT ACL link
*
* Range: 0 - 255 (ms)
*/
- CONF_SG_WLAN_ACTIVE_MAX_BT_ACL_BR,
-
- /*
- * Compensation percentage of WLAN passive scan window if initiated
- * during BT voice
- *
- * Range: 0 - 1000 (%)
- */
- CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_HV3,
-
- /*
- * Compensation percentage of WLAN passive scan window if initiated
- * during BT A2DP
- *
- * Range: 0 - 1000 (%)
- */
- CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_A2DP,
-
- /*
- * Fixed time ensured for BT traffic to gain the antenna during WLAN
- * passive scan.
- *
- * Range: 0 - 1000 ms
- */
- CONF_SG_PASSIVE_SCAN_A2DP_BT_TIME,
-
- /*
- * Fixed time ensured for WLAN traffic to gain the antenna during WLAN
- * passive scan.
- *
- * Range: 0 - 1000 ms
- */
- CONF_SG_PASSIVE_SCAN_A2DP_WLAN_TIME,
+ CONF_SG_UPSD_TIMEOUT,
- /*
- * Number of consequent BT voice frames not interrupted by WLAN
- *
- * Range: 0 - 100
- */
- CONF_SG_HV3_MAX_SERVED,
+ CONF_SG_CONSECUTIVE_CTS_THRESHOLD,
+ CONF_SG_STA_RX_WINDOW_AFTER_DTIM,
+ CONF_SG_STA_CONNECTION_PROTECTION_TIME,
- /*
- * Protection time of the DHCP procedure.
- *
- * Range: 0 - 100000 (ms)
- */
- CONF_SG_DHCP_TIME,
+ /* AP params */
+ CONF_AP_BEACON_MISS_TX,
+ CONF_AP_RX_WINDOW_AFTER_BEACON,
+ CONF_AP_BEACON_WINDOW_INTERVAL,
+ CONF_AP_CONNECTION_PROTECTION_TIME,
+ CONF_AP_BT_ACL_VAL_BT_SERVE_TIME,
+ CONF_AP_BT_ACL_VAL_WL_SERVE_TIME,
- /*
- * Compensation percentage of WLAN active scan window if initiated
- * during BT A2DP
- *
- * Range: 0 - 1000 (%)
- */
- CONF_SG_ACTIVE_SCAN_DURATION_FACTOR_A2DP,
CONF_SG_TEMP_PARAM_1,
CONF_SG_TEMP_PARAM_2,
CONF_SG_TEMP_PARAM_3,
CONF_SG_TEMP_PARAM_4,
CONF_SG_TEMP_PARAM_5,
-
- /*
- * AP beacon miss
- *
- * Range: 0 - 255
- */
- CONF_SG_AP_BEACON_MISS_TX,
-
- /*
- * AP RX window length
- *
- * Range: 0 - 50
- */
- CONF_SG_RX_WINDOW_LENGTH,
-
- /*
- * AP connection protection time
- *
- * Range: 0 - 5000
- */
- CONF_SG_AP_CONNECTION_PROTECTION_TIME,
-
CONF_SG_TEMP_PARAM_6,
CONF_SG_TEMP_PARAM_7,
CONF_SG_TEMP_PARAM_8,
CONF_SG_TEMP_PARAM_9,
CONF_SG_TEMP_PARAM_10,
- CONF_SG_STA_PARAMS_MAX = CONF_SG_TEMP_PARAM_5 + 1,
- CONF_SG_AP_PARAMS_MAX = CONF_SG_TEMP_PARAM_10 + 1,
-
+ CONF_SG_PARAMS_MAX,
CONF_SG_PARAMS_ALL = 0xff
};
struct conf_sg_settings {
- u32 sta_params[CONF_SG_STA_PARAMS_MAX];
- u32 ap_params[CONF_SG_AP_PARAMS_MAX];
+ u32 params[CONF_SG_PARAMS_MAX];
u8 state;
};
enum conf_rx_queue_type {
CONF_RX_QUEUE_TYPE_LOW_PRIORITY, /* All except the high priority */
CONF_RX_QUEUE_TYPE_HIGH_PRIORITY, /* Management and voice packets */
diff --git a/drivers/net/wireless/wl12xx/init.c b/drivers/net/wireless/wl12xx/init.c
index 4691297..b504ee1 100644
--- a/drivers/net/wireless/wl12xx/init.c
+++ b/drivers/net/wireless/wl12xx/init.c
@@ -274,16 +274,13 @@ static int wl1271_init_beacon_filter(struct wl1271 *wl)
}
int wl1271_init_pta(struct wl1271 *wl)
{
int ret;
- if (wl->bss_type == BSS_TYPE_AP_BSS)
- ret = wl1271_acx_ap_sg_cfg(wl);
- else
- ret = wl1271_acx_sta_sg_cfg(wl);
+ ret = wl1271_acx_sg_cfg(wl);
if (ret < 0)
return ret;
ret = wl1271_acx_sg_enable(wl, wl->sg_enabled);
if (ret < 0)
return ret;
@@ -357,17 +354,12 @@ static int wl1271_sta_hw_init(struct wl1271 *wl)
/* Beacon filtering */
ret = wl1271_init_beacon_filter(wl);
if (ret < 0)
return ret;
- /* FM WLAN coexistence */
- ret = wl1271_acx_fm_coex(wl);
- if (ret < 0)
- return ret;
-
/* Beacons and broadcast settings */
ret = wl1271_init_beacon_broadcast(wl);
if (ret < 0)
return ret;
/* Configure for ELP power saving */
diff --git a/drivers/net/wireless/wl12xx/main.c b/drivers/net/wireless/wl12xx/main.c
index fda2531..9fed917 100644
--- a/drivers/net/wireless/wl12xx/main.c
+++ b/drivers/net/wireless/wl12xx/main.c
@@ -49,116 +49,73 @@
#include "scan.h"
#define WL1271_BOOT_RETRIES 3
static struct conf_drv_settings default_conf = {
.sg = {
- .sta_params = {
- [CONF_SG_BT_PER_THRESHOLD] = 7500,
- [CONF_SG_HV3_MAX_OVERRIDE] = 0,
- [CONF_SG_BT_NFS_SAMPLE_INTERVAL] = 400,
- [CONF_SG_BT_LOAD_RATIO] = 200,
- [CONF_SG_AUTO_PS_MODE] = 1,
- [CONF_SG_AUTO_SCAN_PROBE_REQ] = 170,
- [CONF_SG_ACTIVE_SCAN_DURATION_FACTOR_HV3] = 50,
- [CONF_SG_ANTENNA_CONFIGURATION] = 0,
- [CONF_SG_BEACON_MISS_PERCENT] = 60,
- [CONF_SG_RATE_ADAPT_THRESH] = 12,
- [CONF_SG_RATE_ADAPT_SNR] = 0,
- [CONF_SG_WLAN_PS_BT_ACL_MASTER_MIN_BR] = 10,
- [CONF_SG_WLAN_PS_BT_ACL_MASTER_MAX_BR] = 30,
- [CONF_SG_WLAN_PS_MAX_BT_ACL_MASTER_BR] = 8,
- [CONF_SG_WLAN_PS_BT_ACL_SLAVE_MIN_BR] = 20,
- [CONF_SG_WLAN_PS_BT_ACL_SLAVE_MAX_BR] = 50,
- /* Note: with UPSD, this should be 4 */
- [CONF_SG_WLAN_PS_MAX_BT_ACL_SLAVE_BR] = 8,
- [CONF_SG_WLAN_PS_BT_ACL_MASTER_MIN_EDR] = 7,
- [CONF_SG_WLAN_PS_BT_ACL_MASTER_MAX_EDR] = 25,
- [CONF_SG_WLAN_PS_MAX_BT_ACL_MASTER_EDR] = 20,
- /* Note: with UPDS, this should be 15 */
- [CONF_SG_WLAN_PS_BT_ACL_SLAVE_MIN_EDR] = 8,
- /* Note: with UPDS, this should be 50 */
- [CONF_SG_WLAN_PS_BT_ACL_SLAVE_MAX_EDR] = 40,
- /* Note: with UPDS, this should be 10 */
- [CONF_SG_WLAN_PS_MAX_BT_ACL_SLAVE_EDR] = 20,
- [CONF_SG_RXT] = 1200,
- [CONF_SG_TXT] = 1000,
- [CONF_SG_ADAPTIVE_RXT_TXT] = 1,
- [CONF_SG_PS_POLL_TIMEOUT] = 10,
- [CONF_SG_UPSD_TIMEOUT] = 10,
- [CONF_SG_WLAN_ACTIVE_BT_ACL_MASTER_MIN_EDR] = 7,
- [CONF_SG_WLAN_ACTIVE_BT_ACL_MASTER_MAX_EDR] = 15,
- [CONF_SG_WLAN_ACTIVE_MAX_BT_ACL_MASTER_EDR] = 15,
- [CONF_SG_WLAN_ACTIVE_BT_ACL_SLAVE_MIN_EDR] = 8,
- [CONF_SG_WLAN_ACTIVE_BT_ACL_SLAVE_MAX_EDR] = 20,
- [CONF_SG_WLAN_ACTIVE_MAX_BT_ACL_SLAVE_EDR] = 15,
- [CONF_SG_WLAN_ACTIVE_BT_ACL_MIN_BR] = 20,
- [CONF_SG_WLAN_ACTIVE_BT_ACL_MAX_BR] = 50,
- [CONF_SG_WLAN_ACTIVE_MAX_BT_ACL_BR] = 10,
- [CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_HV3] = 200,
- [CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_A2DP] = 800,
- [CONF_SG_PASSIVE_SCAN_A2DP_BT_TIME] = 75,
- [CONF_SG_PASSIVE_SCAN_A2DP_WLAN_TIME] = 15,
- [CONF_SG_HV3_MAX_SERVED] = 6,
- [CONF_SG_DHCP_TIME] = 5000,
- [CONF_SG_ACTIVE_SCAN_DURATION_FACTOR_A2DP] = 100,
- },
- .ap_params = {
- [CONF_SG_BT_PER_THRESHOLD] = 7500,
- [CONF_SG_HV3_MAX_OVERRIDE] = 0,
- [CONF_SG_BT_NFS_SAMPLE_INTERVAL] = 400,
- [CONF_SG_BT_LOAD_RATIO] = 50,
- [CONF_SG_AUTO_PS_MODE] = 1,
- [CONF_SG_AUTO_SCAN_PROBE_REQ] = 170,
- [CONF_SG_ACTIVE_SCAN_DURATION_FACTOR_HV3] = 50,
- [CONF_SG_ANTENNA_CONFIGURATION] = 0,
- [CONF_SG_BEACON_MISS_PERCENT] = 60,
- [CONF_SG_RATE_ADAPT_THRESH] = 64,
- [CONF_SG_RATE_ADAPT_SNR] = 1,
- [CONF_SG_WLAN_PS_BT_ACL_MASTER_MIN_BR] = 10,
- [CONF_SG_WLAN_PS_BT_ACL_MASTER_MAX_BR] = 25,
- [CONF_SG_WLAN_PS_MAX_BT_ACL_MASTER_BR] = 25,
- [CONF_SG_WLAN_PS_BT_ACL_SLAVE_MIN_BR] = 20,
- [CONF_SG_WLAN_PS_BT_ACL_SLAVE_MAX_BR] = 25,
- [CONF_SG_WLAN_PS_MAX_BT_ACL_SLAVE_BR] = 25,
- [CONF_SG_WLAN_PS_BT_ACL_MASTER_MIN_EDR] = 7,
- [CONF_SG_WLAN_PS_BT_ACL_MASTER_MAX_EDR] = 25,
- [CONF_SG_WLAN_PS_MAX_BT_ACL_MASTER_EDR] = 25,
- [CONF_SG_WLAN_PS_BT_ACL_SLAVE_MIN_EDR] = 8,
- [CONF_SG_WLAN_PS_BT_ACL_SLAVE_MAX_EDR] = 25,
- [CONF_SG_WLAN_PS_MAX_BT_ACL_SLAVE_EDR] = 25,
- [CONF_SG_RXT] = 1200,
- [CONF_SG_TXT] = 1000,
- [CONF_SG_ADAPTIVE_RXT_TXT] = 1,
- [CONF_SG_PS_POLL_TIMEOUT] = 10,
- [CONF_SG_UPSD_TIMEOUT] = 10,
- [CONF_SG_WLAN_ACTIVE_BT_ACL_MASTER_MIN_EDR] = 7,
- [CONF_SG_WLAN_ACTIVE_BT_ACL_MASTER_MAX_EDR] = 15,
- [CONF_SG_WLAN_ACTIVE_MAX_BT_ACL_MASTER_EDR] = 15,
- [CONF_SG_WLAN_ACTIVE_BT_ACL_SLAVE_MIN_EDR] = 8,
- [CONF_SG_WLAN_ACTIVE_BT_ACL_SLAVE_MAX_EDR] = 20,
- [CONF_SG_WLAN_ACTIVE_MAX_BT_ACL_SLAVE_EDR] = 15,
- [CONF_SG_WLAN_ACTIVE_BT_ACL_MIN_BR] = 20,
- [CONF_SG_WLAN_ACTIVE_BT_ACL_MAX_BR] = 50,
- [CONF_SG_WLAN_ACTIVE_MAX_BT_ACL_BR] = 10,
- [CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_HV3] = 200,
- [CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_A2DP] = 800,
- [CONF_SG_PASSIVE_SCAN_A2DP_BT_TIME] = 75,
- [CONF_SG_PASSIVE_SCAN_A2DP_WLAN_TIME] = 15,
- [CONF_SG_HV3_MAX_SERVED] = 6,
- [CONF_SG_DHCP_TIME] = 5000,
- [CONF_SG_ACTIVE_SCAN_DURATION_FACTOR_A2DP] = 100,
- [CONF_SG_TEMP_PARAM_1] = 0,
- [CONF_SG_TEMP_PARAM_2] = 0,
- [CONF_SG_TEMP_PARAM_3] = 0,
- [CONF_SG_TEMP_PARAM_4] = 0,
- [CONF_SG_TEMP_PARAM_5] = 0,
- [CONF_SG_AP_BEACON_MISS_TX] = 3,
- [CONF_SG_RX_WINDOW_LENGTH] = 6,
- [CONF_SG_AP_CONNECTION_PROTECTION_TIME] = 50,
- [CONF_SG_TEMP_PARAM_6] = 1,
+ .params = {
+ [CONF_SG_ACL_BT_MASTER_MIN_BR] = 10,
+ [CONF_SG_ACL_BT_MASTER_MAX_BR] = 180,
+ [CONF_SG_ACL_BT_SLAVE_MIN_BR] = 10,
+ [CONF_SG_ACL_BT_SLAVE_MAX_BR] = 180,
+ [CONF_SG_ACL_BT_MASTER_MIN_EDR] = 10,
+ [CONF_SG_ACL_BT_MASTER_MAX_EDR] = 80,
+ [CONF_SG_ACL_BT_SLAVE_MIN_EDR] = 10,
+ [CONF_SG_ACL_BT_SLAVE_MAX_EDR] = 80,
+ [CONF_SG_ACL_WLAN_PS_MASTER_BR] = 8,
+ [CONF_SG_ACL_WLAN_PS_SLAVE_BR] = 8,
+ [CONF_SG_ACL_WLAN_PS_MASTER_EDR] = 20,
+ [CONF_SG_ACL_WLAN_PS_SLAVE_EDR] = 20,
+ [CONF_SG_ACL_WLAN_ACTIVE_MASTER_MIN_BR] = 20,
+ [CONF_SG_ACL_WLAN_ACTIVE_MASTER_MAX_BR] = 35,
+ [CONF_SG_ACL_WLAN_ACTIVE_SLAVE_MIN_BR] = 16,
+ [CONF_SG_ACL_WLAN_ACTIVE_SLAVE_MAX_BR] = 35,
+ [CONF_SG_ACL_WLAN_ACTIVE_MASTER_MIN_EDR] = 32,
+ [CONF_SG_ACL_WLAN_ACTIVE_MASTER_MAX_EDR] = 50,
+ [CONF_SG_ACL_WLAN_ACTIVE_SLAVE_MIN_EDR] = 28,
+ [CONF_SG_ACL_WLAN_ACTIVE_SLAVE_MAX_EDR] = 50,
+ [CONF_SG_ACL_ACTIVE_SCAN_WLAN_BR] = 10,
+ [CONF_SG_ACL_ACTIVE_SCAN_WLAN_EDR] = 20,
+ [CONF_SG_ACL_PASSIVE_SCAN_BT_BR] = 75,
+ [CONF_SG_ACL_PASSIVE_SCAN_WLAN_BR] = 15,
+ [CONF_SG_ACL_PASSIVE_SCAN_BT_EDR] = 27,
+ [CONF_SG_ACL_PASSIVE_SCAN_WLAN_EDR] = 17,
+ /* active scan params */
+ [CONF_SG_AUTO_SCAN_PROBE_REQ] = 170,
+ [CONF_SG_ACTIVE_SCAN_DURATION_FACTOR_HV3] = 50,
+ [CONF_SG_ACTIVE_SCAN_DURATION_FACTOR_A2DP] = 100,
+ /* passive scan params */
+ [CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_A2DP_BR] = 800,
+ [CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_A2DP_EDR] = 200,
+ [CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_HV3] = 200,
+ /* passive scan in dual antenna params */
+ [CONF_SG_CONSECUTIVE_HV3_IN_PASSIVE_SCAN] = 0,
+ [CONF_SG_BCN_HV3_COLLISION_THRESH_IN_PASSIVE_SCAN] = 0,
+ [CONF_SG_TX_RX_PROTECTION_BWIDTH_IN_PASSIVE_SCAN] = 0,
+ /* general params */
+ [CONF_SG_STA_FORCE_PS_IN_BT_SCO] = 1,
+ [CONF_SG_ANTENNA_CONFIGURATION] = 0,
+ [CONF_SG_BEACON_MISS_PERCENT] = 60,
+ [CONF_SG_DHCP_TIME] = 5000,
+ [CONF_SG_RXT] = 1200,
+ [CONF_SG_TXT] = 1000,
+ [CONF_SG_ADAPTIVE_RXT_TXT] = 1,
+ [CONF_SG_GENERAL_USAGE_BIT_MAP] = 3,
+ [CONF_SG_HV3_MAX_SERVED] = 6,
+ [CONF_SG_PS_POLL_TIMEOUT] = 10,
+ [CONF_SG_UPSD_TIMEOUT] = 10,
+ [CONF_SG_CONSECUTIVE_CTS_THRESHOLD] = 2,
+ [CONF_SG_STA_RX_WINDOW_AFTER_DTIM] = 5,
+ [CONF_SG_STA_CONNECTION_PROTECTION_TIME] = 30,
+ /* AP params */
+ [CONF_AP_BEACON_MISS_TX] = 3,
+ [CONF_AP_RX_WINDOW_AFTER_BEACON] = 10,
+ [CONF_AP_BEACON_WINDOW_INTERVAL] = 2,
+ [CONF_AP_CONNECTION_PROTECTION_TIME] = 0,
+ [CONF_AP_BT_ACL_VAL_BT_SERVE_TIME] = 25,
+ [CONF_AP_BT_ACL_VAL_WL_SERVE_TIME] = 25,
},
.state = CONF_SG_PROTECTIVE,
},
.rx = {
.rx_msdu_life_time = 512000,
.packet_detection_threshold = 0,
--
1.7.6.401.g6a319
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
