thanks kernel upgrade to 3.0 and install compat-wireless_3.0_stable_releases ath9k driver [ 4] local 192.168.100.254 port 5001 connected with 192.168.100.47 port 49230 [ ID] Interval Transfer Bandwidth [ 4] 0.0- 2.1 sec 10.0 MBytes 40.5 Mbits/sec [ 5] local 192.168.100.254 port 5001 connected with 192.168.100.47 port 49231 [ 5] 0.0- 6.4 sec 30.0 MBytes 39.2 Mbits/sec 80211n maxinum throughput 40Mbit what i should be check another question wireless client also get 100 MBit/s thanks 2011/8/9 Andreas Hartmann <andihartmann@xxxxxxxxxxxxxxx>: > Dane Shih schrieb: >> hi all >> >> i try to setup AR9285 Wireless ap mode on fedora 12 >> >> but it seem not stable when setup Master mode use hostapd >> so ...i upgrade kernel to 2.6.38.8 >> it's better, no more disconnect >> >> but ap mode in 80211n >> >> hostapd.conf >> >> nterface=wlan0 >> driver=nl80211 >> ssid=test >> hw_mode=g >> wme_enabled=1 >> ieee80211n=1 >> ht_capab=HT40+ > > I'm using > > ht_capab=[HT40+][SHORT-GI-40][DSSS_CCK-40][TX-STBC][RX-STBC1][MAX-AMSDU-3839] > channel=1 > > with this chip and get about 100 MBit/s (kernel 3.0 or 2.6.39) > > > Andreas > -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
