hi all i try to setup AR9285 Wireless ap mode on fedora 12 but it seem not stable when setup Master mode use hostapd so ...i upgrade kernel to 2.6.38.8 it's better, no more disconnect but ap mode in 80211n hostapd.conf nterface=wlan0 driver=nl80211 ssid=test hw_mode=g wme_enabled=1 ieee80211n=1 ht_capab=HT40+ channel=7 auth_algs=3 ignore_broadcast_ssid=0 throughput only 20Mbits install compat-wireless-2.6.38.2-2 on linux /etc/modprobe.d/ath9.conf options ath9k nohwcrypt=1 modprobe -v ath9k insmod /lib/modules/2.6.38.8/updates/net/wireless/cfg80211.ko insmod /lib/modules/2.6.38.8/updates/drivers/net/wireless/ath/ath.ko insmod /lib/modules/2.6.38.8/updates/drivers/net/wireless/ath/ath9k/ath9k_hw.ko insmod /lib/modules/2.6.38.8/updates/drivers/net/wireless/ath/ath9k/ath9k_common.ko insmod /lib/modules/2.6.38.8/updates/net/mac80211/mac80211.ko insmod /lib/modules/2.6.38.8/updates/drivers/net/wireless/ath/ath9k/ath9k.ko nohwcrypt=1 i get maxinum speed is 25Mbit my pc mac acccess another AP maxinum 50Mbit setup AR9285 Wireless calint maxinum 30Mbit AR9285 spec is 150Mbits thanks for any advice -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
