Baruch, Thanks for reporting. Is 02:92:ca:39:48:72 the address of the mesh gate or the address of the external proxied node? Javier On Wed, Jul 27, 2011 at 11:51 PM, Baruch Siach <baruch@xxxxxxxxxx> wrote: > Hi linux-wireless list, > > I'm testing the mesh capabilities (specifically, MPP) of the latest kernel > (3.0). My driver is ath9k on AR9390 chip. My two APs are configured > identically as follows: > > ----- mesh.sh start > #!/bin/sh > > iw dev wlan1 interface add mesh0 type mp mesh_id wavmesh > ip link set mesh0 addr $(cat /etc/network/mesh0.mac) > > brctl addbr br0 > brctl addif br0 eth0 > brctl addif br0 mesh0 > > ifconfig mesh0 down up > ifconfig eth0 0.0.0.0 > ifconfig br0 up > ----- mesh.sh end > > When transferring traffic from a machine behind one eth0 to a machine behind > the other eth0, I see the following on the console (of both APs, only > different MACs): > > Mesh HWMP: sending PREP to 02:92:ca:39:48:72 > Mesh HWMP: sending PREQ to 02:92:ca:39:48:72 > Mesh HWMP: received PREP from 02:92:ca:39:48:72 > Mesh HWMP: received PREQ from 02:92:ca:39:48:72 > Mesh HWMP: PREQ is for us > Mesh HWMP: replying to the PREQ > Mesh HWMP: sending PREP to 02:92:ca:39:48:72 > mesh_queue_preq: 40 callbacks suppressed > Mesh HWMP: PREQ node queue full > Mesh HWMP: PREQ node queue full > Mesh HWMP: PREQ node queue full > Mesh HWMP: PREQ node queue full > Mesh HWMP: PREQ node queue full > Mesh HWMP: PREQ node queue full > Mesh HWMP: PREQ node queue full > Mesh HWMP: PREQ node queue full > Mesh HWMP: PREQ node queue full > Mesh HWMP: PREQ node queue full > > Any suggestion? > > baruch > > -- > ~. .~ Tk Open Systems > =}------------------------------------------------ooO--U--Ooo------------{= > - baruch@xxxxxxxxxx - tel: +972.2.679.5364, http://www.tkos.co.il - > -- Javier Cardona cozybit Inc. http://www.cozybit.com -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html