Hi linux-wireless list,
I'm testing the mesh capabilities (specifically, MPP) of the latest kernel
(3.0). My driver is ath9k on AR9390 chip. My two APs are configured
identically as follows:
----- mesh.sh start
#!/bin/sh
iw dev wlan1 interface add mesh0 type mp mesh_id wavmesh
ip link set mesh0 addr $(cat /etc/network/mesh0.mac)
brctl addbr br0
brctl addif br0 eth0
brctl addif br0 mesh0
ifconfig mesh0 down up
ifconfig eth0 0.0.0.0
ifconfig br0 up
----- mesh.sh end
When transferring traffic from a machine behind one eth0 to a machine behind
the other eth0, I see the following on the console (of both APs, only
different MACs):
Mesh HWMP: sending PREP to 02:92:ca:39:48:72
Mesh HWMP: sending PREQ to 02:92:ca:39:48:72
Mesh HWMP: received PREP from 02:92:ca:39:48:72
Mesh HWMP: received PREQ from 02:92:ca:39:48:72
Mesh HWMP: PREQ is for us
Mesh HWMP: replying to the PREQ
Mesh HWMP: sending PREP to 02:92:ca:39:48:72
mesh_queue_preq: 40 callbacks suppressed
Mesh HWMP: PREQ node queue full
Mesh HWMP: PREQ node queue full
Mesh HWMP: PREQ node queue full
Mesh HWMP: PREQ node queue full
Mesh HWMP: PREQ node queue full
Mesh HWMP: PREQ node queue full
Mesh HWMP: PREQ node queue full
Mesh HWMP: PREQ node queue full
Mesh HWMP: PREQ node queue full
Mesh HWMP: PREQ node queue full
Any suggestion?
baruch
--
~. .~ Tk Open Systems
=}------------------------------------------------ooO--U--Ooo------------{=
- baruch@xxxxxxxxxx - tel: +972.2.679.5364, http://www.tkos.co.il -
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
