Rajkumar Manoharan wrote: > > > > + /* > > > > + * Set the HW AID/BSSID only for the first station interface > > > > + * or in IBSS mode. > > > > + */ > > > > + set_assoc = !!((priv->ah->opmode == NL80211_IFTYPE_ADHOC) || > > > > + ((priv->ah->opmode == NL80211_IFTYPE_STATION) && > > > > + (priv->num_sta_vif == 1))); > > > > + > > > > + > > > Assume there are two station vifs where one is associated and another is not. > > > In such case aid and ani is not configured. > > > > That's the intention... > > > I dont understand why not to start ani on multi-vifs. * If an AP interface is present, ANI will be started when adding the interface. If the AP interface is brought down, the remaining interfaces are checked to see if any associated STA interfaces are present before stopping ANI. * ANI is started for the first STA interface that makes the transition to associated state. For subsequent managed interfaces, there is no point in re-starting ANI, since it is already running. The check there takes care that ANI is not stopped when one STA interface disconnects. Sujith -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
