From: Sujith Manoharan <Sujith.Manoharan@xxxxxxxxxxx>
The AID and BSSID should be set in the HW only for the
first station interface or adhoc interface. Also, cancel
the ANI timer in stop() for multi-STA scenario. And finally
configure the HW beacon timers only for the first station
interface.
Signed-off-by: Sujith Manoharan <Sujith.Manoharan@xxxxxxxxxxx>
---
drivers/net/wireless/ath/ath9k/htc_drv_beacon.c | 17 ++++++++-
drivers/net/wireless/ath/ath9k/htc_drv_main.c | 44 +++++++++++++++--------
2 files changed, 44 insertions(+), 17 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_beacon.c b/drivers/net/wireless/ath/ath9k/htc_drv_beacon.c
index 007b99f..5238091 100644
--- a/drivers/net/wireless/ath/ath9k/htc_drv_beacon.c
+++ b/drivers/net/wireless/ath/ath9k/htc_drv_beacon.c
@@ -123,8 +123,9 @@ static void ath9k_htc_beacon_config_sta(struct ath9k_htc_priv *priv,
/* TSF out of range threshold fixed at 1 second */
bs.bs_tsfoor_threshold = ATH9K_TSFOOR_THRESHOLD;
- ath_dbg(common, ATH_DBG_BEACON, "tsf: %llu tsftu: %u\n", tsf, tsftu);
- ath_dbg(common, ATH_DBG_BEACON,
+ ath_dbg(common, ATH_DBG_CONFIG, "intval: %u tsf: %llu tsftu: %u\n",
+ intval, tsf, tsftu);
+ ath_dbg(common, ATH_DBG_CONFIG,
"bmiss: %u sleep: %u cfp-period: %u maxdur: %u next: %u\n",
bs.bs_bmissthreshold, bs.bs_sleepduration,
bs.bs_cfpperiod, bs.bs_cfpmaxduration, bs.bs_cfpnext);
@@ -341,6 +342,18 @@ void ath9k_htc_beacon_config(struct ath9k_htc_priv *priv,
return;
}
+ /*
+ * The beacon paramters are configured only for the first
+ * station interface.
+ */
+ if ((priv->ah->opmode == NL80211_IFTYPE_STATION) &&
+ (priv->num_sta_vif > 1) &&
+ (vif->type == NL80211_IFTYPE_STATION)) {
+ ath_dbg(common, ATH_DBG_CONFIG,
+ "Beacon already configured for a station interface\n");
+ return;
+ }
+
cur_conf->beacon_interval = bss_conf->beacon_int;
if (cur_conf->beacon_interval == 0)
cur_conf->beacon_interval = 100;
diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_main.c b/drivers/net/wireless/ath/ath9k/htc_drv_main.c
index 949af24..6ec9cb6 100644
--- a/drivers/net/wireless/ath/ath9k/htc_drv_main.c
+++ b/drivers/net/wireless/ath/ath9k/htc_drv_main.c
@@ -1603,30 +1603,44 @@ static void ath9k_htc_bss_info_changed(struct ieee80211_hw *hw,
struct ath9k_htc_priv *priv = hw->priv;
struct ath_hw *ah = priv->ah;
struct ath_common *common = ath9k_hw_common(ah);
+ bool set_assoc;
mutex_lock(&priv->mutex);
ath9k_htc_ps_wakeup(priv);
+ /*
+ * Set the HW AID/BSSID only for the first station interface
+ * or in IBSS mode.
+ */
+ set_assoc = !!((priv->ah->opmode == NL80211_IFTYPE_ADHOC) ||
+ ((priv->ah->opmode == NL80211_IFTYPE_STATION) &&
+ (priv->num_sta_vif == 1)));
+
+
if (changed & BSS_CHANGED_ASSOC) {
- common->curaid = bss_conf->assoc ?
- bss_conf->aid : 0;
- ath_dbg(common, ATH_DBG_CONFIG, "BSS Changed ASSOC %d\n",
- bss_conf->assoc);
+ if (set_assoc) {
+ ath_dbg(common, ATH_DBG_CONFIG, "BSS Changed ASSOC %d\n",
+ bss_conf->assoc);
- if (bss_conf->assoc)
- ath9k_htc_start_ani(priv);
- else
- ath9k_htc_stop_ani(priv);
+ common->curaid = bss_conf->assoc ?
+ bss_conf->aid : 0;
+
+ if (bss_conf->assoc)
+ ath9k_htc_start_ani(priv);
+ else
+ ath9k_htc_stop_ani(priv);
+ }
}
if (changed & BSS_CHANGED_BSSID) {
- /* Set BSSID */
- memcpy(common->curbssid, bss_conf->bssid, ETH_ALEN);
- ath9k_hw_write_associd(ah);
+ if (set_assoc) {
+ memcpy(common->curbssid, bss_conf->bssid, ETH_ALEN);
+ ath9k_hw_write_associd(ah);
- ath_dbg(common, ATH_DBG_CONFIG,
- "BSSID: %pM aid: 0x%x\n",
- common->curbssid, common->curaid);
+ ath_dbg(common, ATH_DBG_CONFIG,
+ "BSSID: %pM aid: 0x%x\n",
+ common->curbssid, common->curaid);
+ }
}
if ((changed & BSS_CHANGED_BEACON_ENABLED) && bss_conf->enable_beacon) {
--
1.7.4.1
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
