From: Sujith Manoharan <Sujith.Manoharan@xxxxxxxxxxx>
The target beacon transmission time has to be synced with the HW
TSF when configuring beacon timers in Adhoc mode. Failing to do this
would cause erroneous beacon transmission, for example, on completion
of a scan run to check for IBSS merges.
Signed-off-by: Sujith Manoharan <Sujith.Manoharan@xxxxxxxxxxx>
---
drivers/net/wireless/ath/ath9k/htc_drv_beacon.c | 19 +++++++++++++++----
1 files changed, 15 insertions(+), 4 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_beacon.c b/drivers/net/wireless/ath/ath9k/htc_drv_beacon.c
index e897a56..007b99f 100644
--- a/drivers/net/wireless/ath/ath9k/htc_drv_beacon.c
+++ b/drivers/net/wireless/ath/ath9k/htc_drv_beacon.c
@@ -188,20 +188,31 @@ static void ath9k_htc_beacon_config_adhoc(struct ath9k_htc_priv *priv,
{
struct ath_common *common = ath9k_hw_common(priv->ah);
enum ath9k_int imask = 0;
- u32 nexttbtt, intval;
+ u32 nexttbtt, intval, tsftu;
__be32 htc_imask = 0;
int ret;
u8 cmd_rsp;
+ u64 tsf;
intval = bss_conf->beacon_interval & ATH9K_BEACON_PERIOD;
nexttbtt = intval;
+
+ /*
+ * Pull nexttbtt forward to reflect the current TSF.
+ */
+ tsf = ath9k_hw_gettsf64(priv->ah);
+ tsftu = TSF_TO_TU(tsf >> 32, tsf) + FUDGE;
+ do {
+ nexttbtt += intval;
+ } while (nexttbtt < tsftu);
+
intval |= ATH9K_BEACON_ENA;
if (priv->op_flags & OP_ENABLE_BEACON)
imask |= ATH9K_INT_SWBA;
- ath_dbg(common, ATH_DBG_BEACON,
- "IBSS Beacon config, intval: %d, imask: 0x%x\n",
- bss_conf->beacon_interval, imask);
+ ath_dbg(common, ATH_DBG_CONFIG,
+ "IBSS Beacon config, intval: %d, nexttbtt: %u, imask: 0x%x\n",
+ bss_conf->beacon_interval, nexttbtt, imask);
WMI_CMD(WMI_DISABLE_INTR_CMDID);
ath9k_hw_beaconinit(priv->ah, nexttbtt, intval);
--
1.7.4.1
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
