On Tuesday, January 18, 2011 11:40:36 Johannes Berg wrote: > On Mon, 2011-01-17 at 09:31 +0100, Bernhard Schmidt wrote: > > Before a radar channel can be used, a full CAC has be done, the > > IEEE80211_CHAN_RADAR_CLEAR flags indicates that this has been done. > > If either during CAC or in-service monitoring interference is > > detected, the channel is added to NOL and marked with > > IEEE80211_CHAN_RADAR_INTERFERENCE. > > I'm not sure about this -- shouldn't that be global information? If > one device in the system records a radar on the channel, it surely > applies to other devices as well, even if they are hot-plugged after > the radar was found? True, I've based this on our IRC discussions, the consensus there was to do it per-wiphy only at first. -- Best regards, Dipl.-Inf. (FH) Bernhard Schmidt (software development) saxnet GmbH, Willy-Brandt-Ring 1, 08606 Oelsnitz Tel. +49 (0) 3741 300 6. 100 - Fax +49 (0) 3741 300 6. 101 managing director: Steffen Dreise - county court Chemnitz - HRB 23017 http://www.saxnet.de -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
