These patches add access point mode support to the wl12xx driver. This mode uses a separate firmware and has a different initialization sequence. In all instances, the flow has been split according to the operating mode of the driver (AP/STA), so as not to affect STA mode functionality. v1->2: rebased on latest wl12xx tree Arik Nemtsov (18): wl1271: Add AP related configuration to conf_drv_settings wl1271: AP mode - AP specific CMD_CONFIGURE sub-commands wl1271: AP mode - add AP specific event wl1271: AP-mode high level commands wl1271: AP mode - workaround for FW bug on station remove wl1271: AP mode - init sequence wl1271: AP specific RX filter configuration wl1271: Add AP related definitions to HOST-FW interface wl1271: Configure AP on BSS info change wl1271: AP mode config in ieee80211_ops.config wl1271: AP mode - change filter config wl1271: AP mode - add STA add/remove ops wl1271: AP mode - changes in TX path wl1271: AP mode - record TX configuration settings wl1271: AP mode - encryption support wl1271: AP mode - fetch appropriate firmware for AP wl1271: Read MAC address from NVS file on HW startup wl1271: Enable AP-mode drivers/net/wireless/wl12xx/acx.c | 62 +++- drivers/net/wireless/wl12xx/acx.h | 31 ++- drivers/net/wireless/wl12xx/boot.c | 6 +- drivers/net/wireless/wl12xx/boot.h | 3 + drivers/net/wireless/wl12xx/cmd.c | 300 +++++++++++- drivers/net/wireless/wl12xx/cmd.h | 143 +++++- drivers/net/wireless/wl12xx/conf.h | 26 +- drivers/net/wireless/wl12xx/event.c | 7 +- drivers/net/wireless/wl12xx/event.h | 8 +- drivers/net/wireless/wl12xx/init.c | 352 ++++++++++--- drivers/net/wireless/wl12xx/init.h | 5 +- drivers/net/wireless/wl12xx/main.c | 752 ++++++++++++++++++++++------ drivers/net/wireless/wl12xx/rx.h | 12 +- drivers/net/wireless/wl12xx/tx.c | 70 ++- drivers/net/wireless/wl12xx/tx.h | 13 +- drivers/net/wireless/wl12xx/wl12xx.h | 68 +++- drivers/net/wireless/wl12xx/wl12xx_80211.h | 5 + 17 files changed, 1582 insertions(+), 281 deletions(-) -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
