16.12.2010 17:10, Alexander Khryukin ÐÐÑÐÑ: > Good day. > I have > 1.MeeGo 1.1 > 2.Intel Corporation WiMAX/WiFi Link 6050 Series (rev 2c) > 3.Wimax network that named 'Yota' > > > wimaxcu scan wide > WARNING: Wide scan may take upto 2 minutes... > NSP : Yota > ID : 21 > Signal : Excellent > RSSI : -62 dBm > CINR : 29 dB > Network Type: Home Network > Activated. > > > > Then i try to connect with Yota-network > > wimaxcu connect network 21 > Connecting to Yota Network... > Connection successful > > [root@meego-desktop ~]# /usr/bin/wimaxd -d -i wmx0 > Enter Command: > q - Quit AppSrv > t - Trace ReInit (ReLoads Registry Values) > u - uplink(Apdo uplink event > h - Help > d - Toggle driver messages to display - debug & internal only > > > AppSrv is ready ! > Act_FullRestart! > Act_DriverDeviceStatus - DRIVER_UP > CTRL-EVENT-EAP-STARTED EAP authentication started > Sending EapResponse. Data size: 25 > CTRL-EVENT-EAP-PROPOSED-METHOD vendor=0 method=13 > CTRL-EVENT-EAP-METHOD EAP vendor 0 method 13 (TLS) selected > Sending EapResponse. Data size: 60 > Sending EapResponse. Data size: 60 > Sending EapResponse. Data size: 6 > Sending EapResponse. Data size: 6 > Sending EapResponse. Data size: 1310 > Sending EapResponse. Data size: 1144 > Sending EapResponse. Data size: 6 > CTRL-EVENT-EAP-SUCCESS EAP authentication completed successfully > CTRL-EVENT-EAP-STARTED EAP authentication started > Sending EapResponse. Data size: 17 > CTRL-EVENT-EAP-PROPOSED-METHOD vendor=0 method=13 > CTRL-EVENT-EAP-METHOD EAP vendor 0 method 13 (TLS) selected > Sending EapResponse. Data size: 60 > Sending EapResponse. Data size: 6 > Sending EapResponse. Data size: 6 > Sending EapResponse. Data size: 1310 > Sending EapResponse. Data size: 1144 > Sending EapResponse. Data size: 6 > > > Then i try to reconnect > > [root@meego-desktop ~]# wimaxcu connect network 21 > Current Preferred Profile is: > ID : 21 > Name: Yota > Connecting to Yota Network... > Connection failure > > > Next i try to > > wimaxll -i wmx0 reset > and start daemon again > > /usr/bin/wimaxd -d -i wmx0 > > Connect to network > > imaxcu connect network 21 > Current Preferred Profile is: > ID : 21 > Name: Yota > Connecting to Yota Network... > Connection successful > > > Wimaxd version wimax-1.5.1-35.13.i586.rpm > from Inaky Perez-Gonzalez repo. > http://download.meego.com/live/home:/inaky:/pegatron-idf-2010/Trunk/i586/ > > > uname -a > Linux meego-desktop 2.6.36-1.9_mezon.12.1-netbook #1 SMP PREEMPT Wed Dec > 15 20:01:48 MSK 2010 i686 i686 i386 GNU/Linux > > > > steps to reproduce: > 1.Plug on Intel Corporation WiMAX/WiFi Link 6050 Series (rev 2c) > 2.Install any version on wimaxd > 3.wimaxcu connect any_network_id > 4.wait about 2 minutes > 5.connection dropped. > 6.try connect again, and see "connection failure" > 7.wimaxll -i wmx0 rese > 8.connect to network again (it will be succeeded) > 9.Proceed to step 4 > > -- > To unsubscribe from this list: send the line "unsubscribe linux-wireless" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html > Additional report. [root@meego-desktop ~]# /usr/bin/wimaxd -d -i wmx0 Enter Command: q - Quit AppSrv t - Trace ReInit (ReLoads Registry Values) u - uplink(Apdo uplink event h - Help d - Toggle driver messages to display - debug & internal only AppSrv is ready ! Act_FullRestart! Act_DriverDeviceStatus - DRIVER_UP /var/log/wimax/wimaxd.log http://pastebin.ca/2022059 And wait for 2 minutes Now connection dropped in log nothing interesting not dropped [root@meego-desktop ~]# wimaxcu connect network 21 Current Preferred Profile is: ID : 21 Name: Yota Connecting to Yota Network... Connection failure In log http://pastebin.ca/2022057 -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
