Good day.
I have
1.MeeGo 1.1
2.Intel Corporation WiMAX/WiFi Link 6050 Series (rev 2c)
3.Wimax network that named 'Yota'
wimaxcu scan wide
WARNING: Wide scan may take upto 2 minutes...
NSP : Yota
ID : 21
Signal : Excellent
RSSI : -62 dBm
CINR : 29 dB
Network Type: Home Network
Activated.
Then i try to connect with Yota-network
wimaxcu connect network 21
Connecting to Yota Network...
Connection successful
[root@meego-desktop ~]# /usr/bin/wimaxd -d -i wmx0
Enter Command:
q - Quit AppSrv
t - Trace ReInit (ReLoads Registry Values)
u - uplink(Apdo uplink event
h - Help
d - Toggle driver messages to display - debug & internal only
AppSrv is ready !
Act_FullRestart!
Act_DriverDeviceStatus - DRIVER_UP
CTRL-EVENT-EAP-STARTED EAP authentication started
Sending EapResponse. Data size: 25
CTRL-EVENT-EAP-PROPOSED-METHOD vendor=0 method=13
CTRL-EVENT-EAP-METHOD EAP vendor 0 method 13 (TLS) selected
Sending EapResponse. Data size: 60
Sending EapResponse. Data size: 60
Sending EapResponse. Data size: 6
Sending EapResponse. Data size: 6
Sending EapResponse. Data size: 1310
Sending EapResponse. Data size: 1144
Sending EapResponse. Data size: 6
CTRL-EVENT-EAP-SUCCESS EAP authentication completed successfully
CTRL-EVENT-EAP-STARTED EAP authentication started
Sending EapResponse. Data size: 17
CTRL-EVENT-EAP-PROPOSED-METHOD vendor=0 method=13
CTRL-EVENT-EAP-METHOD EAP vendor 0 method 13 (TLS) selected
Sending EapResponse. Data size: 60
Sending EapResponse. Data size: 6
Sending EapResponse. Data size: 6
Sending EapResponse. Data size: 1310
Sending EapResponse. Data size: 1144
Sending EapResponse. Data size: 6
Then i try to reconnect
[root@meego-desktop ~]# wimaxcu connect network 21
Current Preferred Profile is:
ID : 21
Name: Yota
Connecting to Yota Network...
Connection failure
Next i try to
wimaxll -i wmx0 reset
and start daemon again
/usr/bin/wimaxd -d -i wmx0
Connect to network
imaxcu connect network 21
Current Preferred Profile is:
ID : 21
Name: Yota
Connecting to Yota Network...
Connection successful
Wimaxd version wimax-1.5.1-35.13.i586.rpm
from Inaky Perez-Gonzalez repo.
http://download.meego.com/live/home:/inaky:/pegatron-idf-2010/Trunk/i586/
uname -a
Linux meego-desktop 2.6.36-1.9_mezon.12.1-netbook #1 SMP PREEMPT Wed Dec
15 20:01:48 MSK 2010 i686 i686 i386 GNU/Linux
steps to reproduce:
1.Plug on Intel Corporation WiMAX/WiFi Link 6050 Series (rev 2c)
2.Install any version on wimaxd
3.wimaxcu connect any_network_id
4.wait about 2 minutes
5.connection dropped.
6.try connect again, and see "connection failure"
7.wimaxll -i wmx0 rese
8.connect to network again (it will be succeeded)
9.Proceed to step 4
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
