Calibration data are stored at 4k address (0xfff). The cal data
for AR9485 is not compressed so its lengh can exceed 1024 limit,
take care of that.
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@xxxxxxxxxxx>
---
drivers/net/wireless/ath/ath9k/ar9003_eeprom.c | 8 ++++++--
drivers/net/wireless/ath/ath9k/ar9003_eeprom.h | 1 +
2 files changed, 7 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
index 4aecc10..6cbfbfa 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
@@ -3317,7 +3317,10 @@ static int ar9300_eeprom_restore_internal(struct ath_hw *ah,
memcpy(mptr, &ar9300_default, mdata_size);
read = ar9300_read_eeprom;
- cptr = AR9300_BASE_ADDR;
+ if (AR_SREV_9485(ah))
+ cptr = AR9300_BASE_ADDR_4K;
+ else
+ cptr = AR9300_BASE_ADDR;
ath_print(common, ATH_DBG_EEPROM,
"Trying EEPROM accesss at Address 0x%04x\n", cptr);
if (ar9300_check_eeprom_header(ah, read, cptr))
@@ -3360,7 +3363,8 @@ found:
"Found block at %x: code=%d ref=%d"
"length=%d major=%d minor=%d\n", cptr, code,
reference, length, major, minor);
- if (length >= 1024) {
+ if ((!AR_SREV_9485(ah) && length >= 1024) ||
+ (AR_SREV_9485(ah) && length >= (4 * 1024))) {
ath_print(common, ATH_DBG_EEPROM,
"Skipping bad header\n");
cptr -= COMP_HDR_LEN;
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.h b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.h
index 57f64db..d189c87 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.h
+++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.h
@@ -78,6 +78,7 @@
#define AR9300_EEPROM_SIZE (16*1024)
#define FIXED_CCA_THRESHOLD 15
+#define AR9300_BASE_ADDR_4K 0xfff
#define AR9300_BASE_ADDR 0x3ff
#define AR9300_BASE_ADDR_512 0x1ff
--
1.7.0.4
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
