John,
This patch series add support for a new chipset of AR9003 family.
This chip(AR9485) is an 1x1 and 2.4Ghz band only.
Vasanth
Vasanthakumar Thiagarajan (26):
ath9k_hw: Define hw version macros for AR9485
ath9k_hw: Add initvals.h for AR9485
ath9k_hw: Enable hw initialization for AR9485
ath9k_hw: Initialize mode registers for AR9485
ath9k_hw: Initialize tx/rx gain table from initvals.h for AR9485
ath9k_hw: Eeeprom changes for AR9485
ath9k_hw: Disable LDPC for AR9485
ath9k: Disable TX STBC for AR9485
ath9k: Enable extended synch for AR9485 to fix L0s recovery issue
ath9k: Configure pll control for AR9485
ath9k_hw: Find chansel of AR_PHY_65NM_CH0_SYNTH7 from an array for
AR9485
ath9k_hw: Add a helper function to get spur channel pointer from cal
data for AR9003 family
ath9k: Read spur channel information from eeprom for AR9485
ath9k_hw: Configure xpa bias level for AR9485
ath9k_hw: Read and configure antenna diversity control for AR9485
ath9k_hw: Configure attenuation control only for chain 0 on AR9485
ath9k_hw: Configure internal regulator for AR9485
ath9k_hw: Read and configure turnning caps to regulate freq accuracy
ath9k_hw: Configure power control only for chain 0 on AR9485
ath9k_hw: Program appropriate chianmask for AR9485 before starting
AGC/IQ cal
ath9k_hw: Define IQcal correction coefficient registers using index
ath9k_hw: Add IQ cal changes for AR9485
ath9k_hw: Program appropriate register for temperature compensation
cal for AR9485
ath9k_hw: Setup paprd only for chain 0 on AR9485
ath9k_hw: Disable MRC CCK for AR9485
ath9k: Add device id of AR9485 to pci table
drivers/net/wireless/ath/ath.h | 1 +
drivers/net/wireless/ath/ath9k/ani.c | 2 +-
drivers/net/wireless/ath/ath9k/ar9003_calib.c | 256 ++++++-
drivers/net/wireless/ath/ath9k/ar9003_eeprom.c | 193 ++++-
drivers/net/wireless/ath/ath9k/ar9003_eeprom.h | 2 +
drivers/net/wireless/ath/ath9k/ar9003_hw.c | 278 +++++--
drivers/net/wireless/ath/ath9k/ar9003_paprd.c | 40 +-
drivers/net/wireless/ath/ath9k/ar9003_phy.c | 76 ++-
drivers/net/wireless/ath/ath9k/ar9003_phy.h | 70 ++-
drivers/net/wireless/ath/ath9k/ar9485_initvals.h | 943 ++++++++++++++++++++++
drivers/net/wireless/ath/ath9k/hw.c | 19 +-
drivers/net/wireless/ath/ath9k/hw.h | 3 +
drivers/net/wireless/ath/ath9k/init.c | 4 +-
drivers/net/wireless/ath/ath9k/main.c | 3 +
drivers/net/wireless/ath/ath9k/pci.c | 13 +
drivers/net/wireless/ath/ath9k/reg.h | 10 +
16 files changed, 1745 insertions(+), 168 deletions(-)
create mode 100644 drivers/net/wireless/ath/ath9k/ar9485_initvals.h
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
