On Wed, Nov 17, 2010 at 06:12:56PM +0100, Michael Büsch wrote: > On Tue, 2010-11-16 at 16:23 -0500, John W. Linville wrote: > > > - ssb_printk(KERN_WARNING PFX "Unsupported SPROM" > > > - " revision %d detected. Will extract" > > > - " v1\n", out->revision); > > > - out->revision = 1; > > > - sprom_extract_r123(out, in); > > > + ssb_printk(KERN_ERR PFX "Unsupported SPROM revision %d" > > > + " detected\n", out->revision); > > > + return -EINVAL; > > > } > > > > > > if (out->boardflags_lo == 0xFFFF) > > > > I think this is going to make my b43 PCI-E card not work...I'll try > > it and get back to you... > > Hm, what version does it report? This is what I see in dmesg (w/o the patch): [ 1036.277235] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x11, vendor 0x4243) [ 1036.277249] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x0A, vendor 0x4243) [ 1036.277267] ssb: Core 2 found: USB 1.1 Host (cc 0x817, rev 0x03, vendor 0x4243) [ 1036.277277] ssb: Core 3 found: PCI-E (cc 0x820, rev 0x01, vendor 0x4243) [ 1036.293856] ssb: WARNING: Invalid SPROM CRC (corrupt SPROM) [ 1036.293865] ssb: Unsupported SPROM revision 255 detected. Will extract v1 [ 1036.301254] ssb: Sonics Silicon Backplane found on PCI device 0000:04:00.0 [ 1036.420643] b43-phy1: Broadcom 4311 WLAN found (core revision 10) [ 1036.435060] b43-phy1 debug: Found PHY: Analog 4, Type 2, Revision 8 [ 1036.435082] b43-phy1 debug: Found Radio: Manuf 0x17F, Version 0x2050, Revision 2 [ 1036.445105] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht' [ 1036.450914] Registered led device: b43-phy1::tx [ 1036.451466] Registered led device: b43-phy1::rx [ 1036.451890] Registered led device: b43-phy1::radio [ 1036.452226] Broadcom 43xx driver loaded [ Features: PMLS, Firmware-ID: FW13 ] [ 1036.480736] udev[2440]: renamed network interface wlan1 to wlan2 [ 1036.513712] cfg80211: Calling CRDA for country: US [ 1036.623061] b43-phy1: Loading OpenSource firmware version 410.31754 [ 1036.623075] b43-phy1: Hardware crypto acceleration not supported by firmware [ 1036.623083] b43-phy1: QoS not supported by firmware [ 1036.656362] b43-phy1 debug: Chip initialized [ 1036.661477] b43-phy1 debug: 32-bit DMA initialized [ 1036.661499] b43-phy1 debug: QoS disabled [ 1036.672035] b43-phy1 debug: Wireless interface started [ 1036.674628] b43-phy1 debug: Adding Interface type 2 -- John W. Linville Someday the world will need a hero, and you linville@xxxxxxxxxxxxx might be all we have. Be ready. -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
