Search Linux Wireless

Re: [PATCH] rtl8187b: do not do per packet TX AGC

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Thadeu Lima de Souza Cascardo <cascardo@...> writes:

> Perhaps, the problem is related to using compat-wireless. Have you tried
> using the module without the patch, using this same compat-wireless
> version in the same linux version you are using?

Cascardo, you were right :-) Your patch did not cause the problem.
I get those errors also with an unpatched compat-wireless-2010-10-25 driver.

With a patched compat-wireless-2.6.33.6 there occur no errors.

The router reports a better signal quality compared to the unpatched module, but 
I can not really recognize a better throughput - usually still max 1 mbit @ 10 
meters.

I noticed that the connection is fast for a short time after booting (10 mbit @ 
10 meters), but a few seconds after the download on speedtest.net started 
(meaning the network gets under load), speed drops to 1 mbit and never recovers 
to faster speed again; somehow like an "unrecoverable fallback mechanism"...?

--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]
  Powered by Linux