Hi, Am Samstag 23 Oktober 2010 schrieb Lee: > On 22/10/10 01:47, Lee wrote: > > The test case is as follows: I have eth0 and wlan0 (the interface to an > > rt37usb device) in a bridge lan0. I have a properly configured hostapd. When I > > try to connect with a client to my hostapd AP, I can successfully > > authenticate, but all further packets don't reach the interface of the AP. > > > > However, I can see broadcast packets *from* the AP on my client, but not the > > other way round (DHCP requests from client to AP). To make sure the bug was > > not specific to broadcast packets, I manually set an IP on my client and tried > > to ping the AP, but those packets didn't come through, either. [...] > I checked vanilla 2.6.36, the bug is still there. Is this a known bug? Does > anyone care to give me some hints? Are any details needed? Please try to create a monitor interface on the rt73usb AP after setting it up: # iw dev wlan0 interface add mon0 type monitor and run a tcpdump on that (with XX:...:XX replaced by the MAC address of your client): # tcpdump -i mon0 "ether src XX:XX:XX:XX:XX:XX" Do you see any frames from your specific client? Helmut -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
