Search Linux Wireless

[PATCH 3/3] b43: N-PHY: don't duplicate setting channel in shared memory

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



It's already set in PHY common code.

Signed-off-by: RafaÅ MiÅecki <zajec5@xxxxxxxxx>
---
 drivers/net/wireless/b43/phy_n.c |   13 +++----------
 1 files changed, 3 insertions(+), 10 deletions(-)

diff --git a/drivers/net/wireless/b43/phy_n.c b/drivers/net/wireless/b43/phy_n.c
index 47c58cd..bb8cb36 100644
--- a/drivers/net/wireless/b43/phy_n.c
+++ b/drivers/net/wireless/b43/phy_n.c
@@ -73,8 +73,6 @@ static void b43_nphy_rf_control_override(struct b43_wldev *dev, u16 field,
 						u16 value, u8 core, bool off);
 static void b43_nphy_rf_control_intc_override(struct b43_wldev *dev, u8 field,
 						u16 value, u8 core);
-static int b43_nphy_op_switch_channel(struct b43_wldev *dev,
-				      unsigned int new_channel);
 
 static inline bool b43_empty_chanspec(struct b43_chanspec *chanspec)
 {
@@ -224,7 +222,7 @@ static void b43_radio_init2055_post(struct b43_wldev *dev)
 	if (i)
 		b43err(dev->wl, "radio post init timeout\n");
 	b43_radio_mask(dev, B2055_CAL_LPOCTL, 0xFF7F);
-	b43_nphy_op_switch_channel(dev, dev->phy.channel);
+	b43_switch_channel(dev, dev->phy.channel);
 	b43_radio_write(dev, B2055_C1_RX_BB_LPF, 0x9);
 	b43_radio_write(dev, B2055_C2_RX_BB_LPF, 0x9);
 	b43_radio_write(dev, B2055_C1_RX_BB_MIDACHP, 0x83);
@@ -3352,12 +3350,7 @@ static void b43_nphy_chanspec_setup(struct b43_wldev *dev,
 
 	b43_chantab_phy_upload(dev, e);
 
-	tmp = chanspec.channel;
-	if (chanspec.b_freq == 1)
-		tmp |= 0x0100;
-	if (chanspec.b_width == 3)
-		tmp |= 0x0200;
-	b43_shm_write16(dev, B43_SHM_SHARED, 0xA0, tmp);
+	/* Don't follow specs, B43_SHM_SH_CHAN is set by b43_switch_channel */
 
 	if (nphy->radio_chanspec.channel == 14) {
 		b43_nphy_classifier(dev, 2, 0);
@@ -3559,7 +3552,7 @@ static void b43_nphy_op_software_rfkill(struct b43_wldev *dev,
 	} else {
 		if (dev->phy.rev >= 3) {
 			b43_radio_init2056(dev);
-			b43_nphy_op_switch_channel(dev, dev->phy.channel);
+			b43_switch_channel(dev, dev->phy.channel);
 		} else {
 			b43_radio_init2055(dev);
 		}
-- 
1.7.1

--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]
  Powered by Linux