> Yes, that's the idea behind this. I'm using an OpenWRT based WLAN router
> and a Debian client with the configuration below.
Oh, I don't have much success so far.
My setup is like this:
Linux 2.6.35.4
compat-wireless-2010-10-02, using
ath5k from this
iw from git with your patch
------------------------------------------
auto lo
iface lo inet loopback
auto wlan0
iface wlan0 inet manual
pre-up iw wlan0 set 4addr on
auto eth0
iface eth0 inet manual
iface br0 inet static
address 192.168.233.197
netmask 255.255.255.0
bridge_ports eth0 wlan0
bridge_wait 0
bridge_fd 0
bridge_stp off
post-up iw wlan0 connect TEST key 0:99999
I also tried it with wpa_supplicant, again from git. The last part of the
/etc/network/interface file looked then like this:
wpa_iface wlan0
wpa_bridge br0
wpa-conf /etc/wpa_supplicant.conf
wpa-driver nl80211
... but in both cases, I didn't have much of success. I tried "tcpdump -i
wlan0 -p" (-p prevents promiscuous mode) and only saw ARP, but never an ARP
response.
I'll investigate further :-)
--
Homepage: http://www.holgerschurig.de
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
