On Saturday 02 October 2010 04:32:04 Saqeb Akhter wrote: > ------------------------------------------------------------ > Client connecting to 192.168.10.52, TCP port 5001 > TCP window size: 16.0 KByte (default) > ------------------------------------------------------------ > [ 3] local 192.168.10.60 port 50647 connected with 192.168.10.52 port 5001 > [ ID] Interval Transfer Bandwidth > [ 3] 0.0-10.0 sec 98.6 MBytes 82.6 Mbits/sec > > Seems to be doing a lot better now thanks :) Hm, I'm not too optimistic. After all, it took a long time to get to this point and even now the driver isn't "stable" yet (hence the EXPERIMENTAL flag). > I was not aware the WMM extensions were needed to get HT working. ;) I think 802.11n says somewhere, something like: "An HT STA is also a QoS STA" And QoS is enabled/setup by WMM. > I ended up upgrading my distro to 10.10 RC, and compiling the > compat-wireless u posted, and enable WMM extensions on my router. > Working considerably better :) One more thing: I've updated the firmware to 1.8.8.3 http://wireless.kernel.org/en/users/Drivers/carl9170#Firmware_binary (In case you are still using the original 1.8.8.1) Best Regards, Christian -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
