On Saturday 02 October 2010 01:56:06 Saqeb Akhter wrote: > Yes carl9170 (from 9/23). wow, that's old. Luis posted a "special" compat-wireless release for carl9170: "See Announcement: Re: Compat-wireless release for 2010-10-01 v2 with RX filter for carl9170 on -p release" http://www.orbit-lab.org/kernel/compat-wireless-2.6/2010/10/compat-wireless-2010-10-01-p.tar.bz2 --- > output iw dev wlan2 scan > > BSS 30:46:9a:10:49:f7 (on wlan2) -- associated > TSF: 90703162427 usec (1d, 01:11:43) > freq: 5200 > beacon interval: 100 > capability: ESS ShortSlotTime (0x0401) > signal: -53.00 dBm > last seen: 672 ms ago > SSID: sakhter-5g > Supported rates: 6.0* 9.0 12.0* 18.0 24.0* 36.0 48.0 54.0 > DS Parameter set: channel 40 > HT capabilities: > Capabilities: 0x1ce > HT20/HT40 > SM Power Save disabled > RX HT40 SGI > TX STBC > RX STBC 1-stream > Max AMSDU length: 7935 bytes > No DSSS/CCK HT40 > Maximum RX AMPDU length 65535 bytes (exponent: 0x003) > Minimum RX AMPDU time spacing: 1/2 usec (0x02) > HT RX MCS rate indexes supported: 0-15 > HT TX MCS rate indexes are undefined ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Now that's interesting, apparently Netgear's AP can't send HT (802.11n) frames! But that's not your problem, it's the missing WMM extension. Your AP should (additionally) display: WMM: * Parameter version 1 * BE: CW 15-1023, AIFSN 3 * BK: CW 15-1023, AIFSN 7 * VI: CW 7-15, AIFSN 2, TXOP 3008 usec * VO: CW 3-7, AIFSN 2, TXOP 1504 usec But since it doesn't, mac80211 does not enable ht. Maybe a new firmware for the router would fix the issue? Regards, Chr -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
