Yes carl9170 (from 9/23).
-----------------------------------------------------------------------------------------------------
Output from lshw -C network:
*-network
description: Wireless interface
physical id: 1
bus info: usb@1:3
logical name: wlan2
serial: 00:22:3f:99:cd:81
capabilities: ethernet physical wireless
configuration: broadcast=yes driver=carl9170
driverversion=2.6.32-24-generic firmware=1.8.8.3 ip=192.168.10.60
multicast=yes wireless=IEEE 802.11abgn
----------------------------------------------------------------------------------------------
sakhter@sakhter-laptop:~$ dmesg | grep alg
[ 0.342735] alg: No test for stdrng (krng)
[ 143.665241] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
------------------------------------------------------------------------------------------------
output iw dev wlan2 scan
BSS 30:46:9a:10:49:f7 (on wlan2) -- associated
TSF: 90703162427 usec (1d, 01:11:43)
freq: 5200
beacon interval: 100
capability: ESS ShortSlotTime (0x0401)
signal: -53.00 dBm
last seen: 672 ms ago
SSID: sakhter-5g
Supported rates: 6.0* 9.0 12.0* 18.0 24.0* 36.0 48.0 54.0
DS Parameter set: channel 40
HT capabilities:
Capabilities: 0x1ce
HT20/HT40
SM Power Save disabled
RX HT40 SGI
TX STBC
RX STBC 1-stream
Max AMSDU length: 7935 bytes
No DSSS/CCK HT40
Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
Minimum RX AMPDU time spacing: 1/2 usec (0x02)
HT RX MCS rate indexes supported: 0-15
HT TX MCS rate indexes are undefined
WPS: * Version: 1.0
* Manufacturer: Netgear, Inc.
* Model: WNDR3700
* Device name: WNDR3700(Wireless AP)
* Config methods: Ethernet, Label, PBC
---------------------------------------------------------------------------------------------------
Hopefully some of that info can help u out.
On Fri, Oct 1, 2010 at 6:52 PM, Christian Lamparter
<chunkeey@xxxxxxxxxxxxxx> wrote:
> On Saturday 02 October 2010 00:30:28 Saqeb Akhter wrote:
>> Below is the out put from iperf on windows (about 3x faster).
>>
>> Not sure what to do to get better throughput...is this considered a bug or a
>> lacking feature ?
> nope, the "feature" is there... It's just not utilized
>
>> -------------------------------------------------------------------------------
>> sakhter@sakhter-laptop:~$ iw dev wlan2 link
>> Connected to 30:46:9a:10:49:f7 (on wlan2)
>> SSID: sakhter-5g
>> freq: 5200
>> RX: 222040 bytes (949 packets)
>> TX: 12082 bytes (77 packets)
>> signal: -45 dBm
>> tx bitrate: 54.0 MBit/s
> are you sure carl9170 is actually handling the device (and not ar9170usb?).
> Also what's the chosen rate control alg? ( - dmesg - will tell you that,
> if it isn't "minstrel_ht", then post please post what "iw dev wlan2 scan"
> shows you about your AP)
>
> Regards,
> Chr
>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
