On August 22, 2010, Thomas Fjellstrom wrote: > Hi, I'm running 2.6.35, and my wireless card fails to initialize properly > on boot. I get the following messages in dmesg: Probably important, but I missed a couple lines: > [ 0.866525] ath5k 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ > 17 [ 0.866536] ath5k 0000:02:00.0: setting latency timer to 64 > [ 0.866571] ath5k 0000:02:00.0: registered as 'phy0' > [ 1.358241] ath: EEPROM regdomain: 0x67 > [ 1.358242] ath: EEPROM indicates we should expect a direct regpair map > [ 1.358245] ath: Country alpha2 being used: 00 > [ 1.358247] ath: Regpair used: 0x67 [ 1.360589] phy0: Failed to initialize wep: -2 > [ 1.372021] ath5k phy0: can't register ieee80211 hw > [ 1.372080] ath5k 0000:02:00.0: PCI INT A disabled > [ 1.372084] ath5k: probe of 0000:02:00.0 failed with error -2 > > That said, if I remove the ath5k module, and modprobe ath5k, it starts > working. > > [ 2976.411770] ath5k 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ > 17 [ 2976.411783] ath5k 0000:02:00.0: setting latency timer to 64 > [ 2976.412767] ath5k 0000:02:00.0: registered as 'phy1' > [ 2976.912422] ath: EEPROM regdomain: 0x67 > [ 2976.912424] ath: EEPROM indicates we should expect a direct regpair map > [ 2976.912427] ath: Country alpha2 being used: 00 > [ 2976.912429] ath: Regpair used: 0x67 [ 2977.078747] phy1: Selected rate control algorithm 'minstrel' > [ 2977.079190] ath5k phy1: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70) > > Is this a known issue? Thanks -- Thomas Fjellstrom thomas@xxxxxxxxxxxxx -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
