all right but i try to test with pacience, but i am newer in module compilation and paths if you create a topic only for the device 4353 is better. and obvios, ever... sorry for the bad english, but a talk from brazil. if you can, try to post the step by step for the path aplication.. for the diff file and the path file... i know to aply the path for the path comand (path <# file) but i dont know the essencial. if you send me modules for test. tks. and the steps Arthur Moreira 2010/8/16 Gábor Stefanik <netrolller.3d@xxxxxxxxx>: > 2010/8/16 Arthur Moreira <arthur.moreira@xxxxxxxxx>: >> Ok, tks Gábor >> >> i will wait, i need much of this card working in monitor mode for >> tests and demonstration and my organization. i work with security in >> my city. and i dont want to plug another card, like usb ou pciexpreess >> card than a original embedded. >> >> if you need a help to tests and beta version of driver or modules >> call me >> >> >> Arthur Moreira > > Well, I post any testing requests on the list, so you will probably > see them here. > > Also, please use the Reply to All button when replying to a list! > >> >> 2010/8/16 Gábor Stefanik <netrolller.3d@xxxxxxxxx>: >>> 2010/8/16 Arthur Moreira <arthur.moreira@xxxxxxxxx>: >>>> Hi, >>>> I have a BCM4353 card, with the hybrid module wl work fine to find >>>> and conect to networks. >>>> But, a want to put the card in monitor mode. >>>> >>>> (my card is a 802.11bgN mini card, in a dell vostro) >>>> >>>> this path will help me? and.. how to aply the path? the comand path $# >>>> < file ??? >>>> tks >>>> >>>> >>>> Arthur Moreira >>>> >>> >>> No, this patch is only for BCM4312 devices, not the BCM43224 that you >>> have (there is no such thing as a "BCM4353" AFAIK - PCI device IDs >>> don't map directly to chip IDs!). Your card is an N-PHY, probably >>> revision 4 or 5 (you can see the revision by adding 14e4:4353 to the >>> list of PCI IDs in ssb, then looking for the "FOUND UNSUPPORTED PHY" >>> line in dmesg). We are working on N-PHYs, revisions <=2 will likely be >>> usable soon; rev.3 and newer will take longer, however. (It is >>> possible that this patch will also be needed for N-PHYs if they show >>> similar DMA errors to the 4312, but it is certainly not enough to get >>> N-PHYs to work.) >>> >>>> >>>> >>>> >>>> 2010/8/16 Gábor Stefanik <netrolller.3d@xxxxxxxxx>: >>>>> Hello Everyone! >>>>> >>>>> If you are experiencing DMA errors on a BCM4312, please test the >>>>> attached patch. It implements the PCI-E SERDES workaround, which the >>>>> hybrid driver is applying during early init to LP-PHY cards, and which >>>>> is a good candidate for the cause of the DMA error. >>>>> Note that this is not a final patch & it may cause collateral damage >>>>> for non-4312 cards; if it helps the 4312 problem, I will submit a >>>>> cleaned-up version. >>>>> >>>>> Thanks, >>>>> Gábor >>>>> >>>> >>> >>> >>> >>> -- >>> Vista: [V]iruses, [I]ntruders, [S]pyware, [T]rojans and [A]dware. :-) >>> >> > > > > -- > Vista: [V]iruses, [I]ntruders, [S]pyware, [T]rojans and [A]dware. :-) > -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
