On 08/16/2010 12:59 PM, Gábor Stefanik wrote: > Hello Everyone! > > If you are experiencing DMA errors on a BCM4312, please test the > attached patch. It implements the PCI-E SERDES workaround, which the > hybrid driver is applying during early init to LP-PHY cards, and which > is a good candidate for the cause of the DMA error. > Note that this is not a final patch & it may cause collateral damage > for non-4312 cards; if it helps the 4312 problem, I will submit a > cleaned-up version. The patch that you distributed had a couple of errors in compiling, namely: CC [M] drivers/ssb/driver_pcicore.o drivers/ssb/driver_pcicore.c: In function ‘ssb_pcie_mdio_set_block’: drivers/ssb/driver_pcicore.c:457:7: error: ‘i’ undeclared (first use in this function) drivers/ssb/driver_pcicore.c:457:7: note: each undeclared identifier is reported only once for each function it appears in drivers/ssb/driver_pcicore.c: In function ‘ssb_pcie_mdio_read’: drivers/ssb/driver_pcicore.c:503:2: error: expected ‘;’ before ‘pcicore_write32’ make[2]: *** [drivers/ssb/driver_pcicore.o] Error 1 make[1]: *** [drivers/ssb] Error 2 make[1]: *** Waiting for unfinished jobs.... Did you forget a quilt refresh? My machine does not have the DMA error, but I will be testing. Larry -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
