From: Jason <jtdreisb@xxxxxxxxx>
---
drivers/staging/wavelan/wavelan.c | 198 ++++++++++++++++++++-----------------
1 files changed, 108 insertions(+), 90 deletions(-)
diff --git a/drivers/staging/wavelan/wavelan.c b/drivers/staging/wavelan/wavelan.c
index 54ca631..37ede43 100644
--- a/drivers/staging/wavelan/wavelan.c
+++ b/drivers/staging/wavelan/wavelan.c
@@ -36,7 +36,7 @@ static u8 wv_irq_to_psa(int irq)
/*------------------------------------------------------------------*/
/*
- * Translate PSA irq parameter to irq number
+ * Translate PSA irq parameter to irq number
*/
static int __init wv_psa_to_irq(u8 irqval)
{
@@ -55,7 +55,7 @@ static int __init wv_psa_to_irq(u8 irqval)
*
* One major difference with the PCMCIA hardware (except the port mapping)
* is that we have to keep the state of the Host Control Register
- * because of the interrupt enable & bus size flags.
+ *because of the interrupt enable & bus size flags.
*/
/*------------------------------------------------------------------*/
@@ -64,7 +64,7 @@ static int __init wv_psa_to_irq(u8 irqval)
*/
static inline u16 hasr_read(unsigned long ioaddr)
{
- return (inw(HASR(ioaddr)));
+ return inw(HASR(ioaddr));
} /* hasr_read */
/*------------------------------------------------------------------*/
@@ -132,11 +132,11 @@ static inline void wv_16_on(unsigned long ioaddr, u16 hacr)
* Disable interrupts on the WaveLAN hardware.
* (called by wv_82586_stop())
*/
-static inline void wv_ints_off(struct net_device * dev)
+static inline void wv_ints_off(struct net_device *dev)
{
net_local *lp = netdev_priv(dev);
unsigned long ioaddr = dev->base_addr;
-
+
lp->hacr &= ~HACR_INTRON;
hacr_write(ioaddr, lp->hacr);
} /* wv_ints_off */
@@ -146,7 +146,7 @@ static inline void wv_ints_off(struct net_device * dev)
* Enable interrupts on the WaveLAN hardware.
* (called by wv_hw_reset())
*/
-static inline void wv_ints_on(struct net_device * dev)
+static inline void wv_ints_on(struct net_device *dev)
{
net_local *lp = netdev_priv(dev);
unsigned long ioaddr = dev->base_addr;
@@ -167,9 +167,11 @@ static inline void wv_ints_on(struct net_device * dev)
/*
* Read bytes from the PSA.
*/
-static void psa_read(unsigned long ioaddr, u16 hacr, int o, /* offset in PSA */
- u8 * b, /* buffer to fill */
- int n)
+static void psa_read(unsigned long ioaddr,
+ u16 hacr,
+ int o, /* offset in PSA */
+ u8 *b, /*buffer to fill */
+ int n)
{ /* size to read */
wv_16_off(ioaddr, hacr);
@@ -186,9 +188,11 @@ static void psa_read(unsigned long ioaddr, u16 hacr, int o, /* offset in PSA */
/*
* Write the Parameter Storage Area to the WaveLAN card's memory.
*/
-static void psa_write(unsigned long ioaddr, u16 hacr, int o, /* Offset in PSA */
- u8 * b, /* Buffer in memory */
- int n)
+static void psa_write(unsigned long ioaddr,
+ u16 hacr,
+ int o, /* Offset in PSA */
+ u8 *b, /*buffer in memory */
+ int n)
{ /* Length of buffer */
int count = 0;
@@ -203,8 +207,8 @@ static void psa_write(unsigned long ioaddr, u16 hacr, int o, /* Offset in PSA */
/* Wait for the memory to finish its write cycle */
count = 0;
- while ((count++ < 100) &&
- (hasr_read(ioaddr) & HASR_PSA_BUSY)) mdelay(1);
+ while ((count++ < 100) && (hasr_read(ioaddr) & HASR_PSA_BUSY))
+ mdelay(1);
}
wv_16_on(ioaddr, hacr);
@@ -221,8 +225,8 @@ static void psa_write(unsigned long ioaddr, u16 hacr, int o, /* Offset in PSA */
* The Windows drivers don't use the CRC, but the AP and the PtP tool
* depend on it.
*/
-static u16 psa_crc(u8 * psa, /* The PSA */
- int size)
+static u16 psa_crc(u8 *psa, /* The PSA */
+ int size)
{ /* Number of short for CRC */
int byte_cnt; /* Loop on the PSA */
u16 crc_bytes = 0; /* Data in the PSA */
@@ -247,7 +251,9 @@ static u16 psa_crc(u8 * psa, /* The PSA */
/*
* update the checksum field in the Wavelan's PSA
*/
-static void update_psa_checksum(struct net_device * dev, unsigned long ioaddr, u16 hacr)
+static void update_psa_checksum(struct net_device *dev,
+ unsigned long ioaddr,
+ u16 hacr)
{
#ifdef SET_PSA_CRC
psa_t psa;
@@ -279,7 +285,8 @@ static void update_psa_checksum(struct net_device * dev, unsigned long ioaddr, u
if (crc != 0)
printk(KERN_WARNING
- "%s: update_psa_checksum(): CRC does not agree with PSA data (even after recalculating)\n",
+ "%s: update_psa_checksum(): CRC does not \
+ agree with PSA data (even after recalculating)\n",
dev->name);
#endif /* DEBUG_IOCTL_INFO */
#endif /* SET_PSA_CRC */
@@ -305,7 +312,7 @@ static void mmc_out(unsigned long ioaddr, u16 o, u8 d)
* Routine to write bytes to the Modem Management Controller.
* We start at the end because it is the way it should be!
*/
-static void mmc_write(unsigned long ioaddr, u8 o, u8 * b, int n)
+static void mmc_write(unsigned long ioaddr, u8 o, u8 *b, int n)
{
o += n;
b += n;
@@ -340,7 +347,7 @@ static u8 mmc_in(unsigned long ioaddr, u16 o)
* (code has just been moved in the above function)
* We start at the end because it is the way it should be!
*/
-static inline void mmc_read(unsigned long ioaddr, u8 o, u8 * b, int n)
+static inline void mmc_read(unsigned long ioaddr, u8 o, u8 *b, int n)
{
o += n;
b += n;
@@ -369,15 +376,16 @@ static inline int mmc_encr(unsigned long ioaddr)
* Wait for the frequency EEPROM to complete a command.
* I hope this one will be optimally inlined.
*/
-static inline void fee_wait(unsigned long ioaddr, /* I/O port of the card */
- int delay, /* Base delay to wait for */
+static inline void fee_wait(unsigned long ioaddr, /* I/O port of the card */
+ int delay, /*base delay to wait for */
int number)
{ /* Number of time to wait */
int count = 0; /* Wait only a limited time */
while ((count++ < number) &&
(mmc_in(ioaddr, mmroff(0, mmr_fee_status)) &
- MMR_FEE_STATUS_BUSY)) udelay(delay);
+ MMR_FEE_STATUS_BUSY))
+ udelay(delay);
}
/*------------------------------------------------------------------*/
@@ -386,7 +394,7 @@ static inline void fee_wait(unsigned long ioaddr, /* I/O port of the card */
*/
static void fee_read(unsigned long ioaddr, /* I/O port of the card */
u16 o, /* destination offset */
- u16 * b, /* data buffer */
+ u16 *b, /* data buffer */
int n)
{ /* number of registers */
b += n; /* Position at the end of the area */
@@ -414,12 +422,12 @@ static void fee_read(unsigned long ioaddr, /* I/O port of the card */
/*
* Write bytes from the Frequency EEPROM (frequency select cards).
* This is a bit complicated, because the frequency EEPROM has to
- * be unprotected and the write enabled.
+ *be unprotected and the write enabled.
* Jean II
*/
static void fee_write(unsigned long ioaddr, /* I/O port of the card */
u16 o, /* destination offset */
- u16 * b, /* data buffer */
+ u16 *b, /* data buffer */
int n)
{ /* number of registers */
b += n; /* Position at the end of the area. */
@@ -473,7 +481,9 @@ static void fee_write(unsigned long ioaddr, /* I/O port of the card */
mmc_out(ioaddr, mmwoff(0, mmw_fee_ctrl),
MMW_FEE_CTRL_WRITE);
- /* WaveLAN documentation says to wait at least 10 ms for EEBUSY = 0 */
+ /* WaveLAN documentation says to
+ * wait at least 10 ms for EEBUSY = 0
+ */
mdelay(10);
fee_wait(ioaddr, 10, 100);
}
@@ -504,7 +514,7 @@ static void fee_write(unsigned long ioaddr, /* I/O port of the card */
* Why does inlining this function make it fail?
*/
static /*inline */ void obram_read(unsigned long ioaddr,
- u16 o, u8 * b, int n)
+ u16 o, u8 *b, int n)
{
outw(o, PIOR1(ioaddr));
insw(PIOP1(ioaddr), (unsigned short *) b, (n + 1) >> 1);
@@ -514,7 +524,7 @@ static /*inline */ void obram_read(unsigned long ioaddr,
/*
* Write bytes to the on-board RAM.
*/
-static inline void obram_write(unsigned long ioaddr, u16 o, u8 * b, int n)
+static inline void obram_write(unsigned long ioaddr, u16 o, u8 *b, int n)
{
outw(o, PIOR1(ioaddr));
outsw(PIOP1(ioaddr), (unsigned short *) b, (n + 1) >> 1);
@@ -524,7 +534,7 @@ static inline void obram_write(unsigned long ioaddr, u16 o, u8 * b, int n)
/*
* Acknowledge the reading of the status issued by the i82586.
*/
-static void wv_ack(struct net_device * dev)
+static void wv_ack(struct net_device *dev)
{
net_local *lp = netdev_priv(dev);
unsigned long ioaddr = dev->base_addr;
@@ -566,7 +576,7 @@ static void wv_ack(struct net_device * dev)
* Set channel attention bit and busy wait until command has
* completed, then acknowledge completion of the command.
*/
-static int wv_synchronous_cmd(struct net_device * dev, const char *str)
+static int wv_synchronous_cmd(struct net_device *dev, const char *str)
{
net_local *lp = netdev_priv(dev);
unsigned long ioaddr = dev->base_addr;
@@ -613,7 +623,7 @@ static int wv_synchronous_cmd(struct net_device * dev, const char *str)
* Check if done, and if OK.
*/
static int
-wv_config_complete(struct net_device * dev, unsigned long ioaddr, net_local * lp)
+wv_config_complete(struct net_device *dev, unsigned long ioaddr, net_local * lp)
{
unsigned short mcs_addr;
unsigned short status;
@@ -641,7 +651,8 @@ wv_config_complete(struct net_device * dev, unsigned long ioaddr, net_local * lp
/* Check mc_config command */
if ((status & AC_SFLD_OK) != AC_SFLD_OK)
printk(KERN_INFO
- "%s: wv_config_complete(): set_multicast_address failed; status = 0x%x\n",
+ "%s: wv_config_complete(): \
+ set_multicast_address failed; status = 0x%x\n",
dev->name, status);
/* check ia-config command */
@@ -650,7 +661,8 @@ wv_config_complete(struct net_device * dev, unsigned long ioaddr, net_local * lp
(unsigned char *) &status, sizeof(status));
if ((status & AC_SFLD_OK) != AC_SFLD_OK)
printk(KERN_INFO
- "%s: wv_config_complete(): set_MAC_address failed; status = 0x%x\n",
+ "%s: wv_config_complete(): set_MAC_address \
+ failed; status = 0x%x\n",
dev->name, status);
/* Check config command. */
@@ -659,7 +671,8 @@ wv_config_complete(struct net_device * dev, unsigned long ioaddr, net_local * lp
(unsigned char *) &status, sizeof(status));
if ((status & AC_SFLD_OK) != AC_SFLD_OK)
printk(KERN_INFO
- "%s: wv_config_complete(): configure failed; status = 0x%x\n",
+ "%s: wv_config_complete(): configure failed; \
+ status = 0x%x\n",
dev->name, status);
#endif /* DEBUG_CONFIG_ERROR */
@@ -680,7 +693,9 @@ wv_config_complete(struct net_device * dev, unsigned long ioaddr, net_local * lp
* (called in wavelan_interrupt()).
* Note : the spinlock is already grabbed for us.
*/
-static int wv_complete(struct net_device * dev, unsigned long ioaddr, net_local * lp)
+static int wv_complete(struct net_device *dev,
+ unsigned long ioaddr,
+ net_local *lp)
{
int nreaped = 0;
@@ -722,9 +737,8 @@ if (lp->tx_n_in_use > 0)
/* Next one in the chain */
lp->tx_first_in_use += TXBLOCKZ;
if (lp->tx_first_in_use >=
- OFFSET_CU +
- NTXBLOCKS * TXBLOCKZ) lp->tx_first_in_use -=
- NTXBLOCKS * TXBLOCKZ;
+ OFFSET_CU + NTXBLOCKS * TXBLOCKZ)
+ lp->tx_first_in_use -= NTXBLOCKS * TXBLOCKZ;
}
/* Hack for reconfiguration */
@@ -741,7 +755,8 @@ if (lp->tx_n_in_use > 0)
#ifdef DEBUG_TX_INFO
if (ncollisions > 0)
printk(KERN_DEBUG
- "%s: wv_complete(): tx completed after %d collisions.\n",
+ "%s: wv_complete(): tx completed after \
+ %d collisions.\n",
dev->name, ncollisions);
#endif
} else {
@@ -758,7 +773,8 @@ if (lp->tx_n_in_use > 0)
dev->stats.tx_carrier_errors++;
#ifdef DEBUG_TX_FAIL
printk(KERN_DEBUG
- "%s: wv_complete(): tx error: lost CTS.\n",
+ "%s: wv_complete(): tx error: \
+ lost CTS.\n",
dev->name);
#endif
}
@@ -766,7 +782,8 @@ if (lp->tx_n_in_use > 0)
dev->stats.tx_fifo_errors++;
#ifdef DEBUG_TX_FAIL
printk(KERN_DEBUG
- "%s: wv_complete(): tx error: slow DMA.\n",
+ "%s: wv_complete(): tx error: \
+ slow DMA.\n",
dev->name);
#endif
}
@@ -774,7 +791,8 @@ if (lp->tx_n_in_use > 0)
dev->stats.tx_heartbeat_errors++;
#ifdef DEBUG_TX_FAIL
printk(KERN_DEBUG
- "%s: wv_complete(): tx error: heart beat.\n",
+ "%s: wv_complete(): tx error: \
+ heart beat.\n",
dev->name);
#endif
}
@@ -782,7 +800,8 @@ if (lp->tx_n_in_use > 0)
dev->stats.tx_aborted_errors++;
#ifdef DEBUG_TX_FAIL
printk(KERN_DEBUG
- "%s: wv_complete(): tx error: too many collisions.\n",
+ "%s: wv_complete(): tx error: \
+ too many collisions.\n",
dev->name);
#endif
}
@@ -804,9 +823,9 @@ if (lp->tx_n_in_use > 0)
/*
* Inform upper layers.
*/
- if (lp->tx_n_in_use < NTXBLOCKS - 1) {
+ if (lp->tx_n_in_use < NTXBLOCKS - 1)
netif_wake_queue(dev);
- }
+
#ifdef DEBUG_INTERRUPT_TRACE
printk(KERN_DEBUG "%s: <-wv_complete()\n", dev->name);
#endif
@@ -816,13 +835,13 @@ if (lp->tx_n_in_use > 0)
/*------------------------------------------------------------------*/
/*
* Reconfigure the i82586, or at least ask for it.
- * Because wv_82586_config uses a transmission buffer, we must do it
+ *because wv_82586_config uses a transmission buffer, we must do it
* when we are sure that there is one left, so we do it now
* or in wavelan_packet_xmit() (I can't find any better place,
* wavelan_interrupt is not an option), so you may experience
* delays sometimes.
*/
-static void wv_82586_reconfig(struct net_device * dev)
+static void wv_82586_reconfig(struct net_device *dev)
{
net_local *lp = netdev_priv(dev);
unsigned long flags;
@@ -831,13 +850,12 @@ static void wv_82586_reconfig(struct net_device * dev)
lp->reconfig_82586 = 1;
/* Check if we can do it now ! */
- if((netif_running(dev)) && !(netif_queue_stopped(dev))) {
+ if ((netif_running(dev)) && !(netif_queue_stopped(dev))) {
spin_lock_irqsave(&lp->spinlock, flags);
/* May fail */
wv_82586_config(dev);
spin_unlock_irqrestore(&lp->spinlock, flags);
- }
- else {
+ } else {
#ifdef DEBUG_CONFIG_INFO
printk(KERN_DEBUG
"%s: wv_82586_reconfig(): delayed (state = %lX)\n",
@@ -857,7 +875,7 @@ static void wv_82586_reconfig(struct net_device * dev)
/*
* Print the formatted contents of the Parameter Storage Area.
*/
-static void wv_psa_show(psa_t * p)
+static void wv_psa_show(psa_t *p)
{
printk(KERN_DEBUG "##### WaveLAN PSA contents: #####\n");
printk(KERN_DEBUG "psa_io_base_addr_1: 0x%02X %02X %02X %02X\n",
@@ -919,13 +937,13 @@ static void wv_psa_show(psa_t * p)
* Print the formatted status of the Modem Management Controller.
* This function needs to be completed.
*/
-static void wv_mmc_show(struct net_device * dev)
+static void wv_mmc_show(struct net_device *dev)
{
unsigned long ioaddr = dev->base_addr;
net_local *lp = netdev_priv(dev);
mmr_t m;
- /* Basic check */
+ /*basic check */
if (hasr_read(ioaddr) & HASR_NO_CLK) {
printk(KERN_WARNING
"%s: wv_mmc_show: modem not connected\n",
@@ -935,7 +953,7 @@ static void wv_mmc_show(struct net_device * dev)
/* Read the mmc */
mmc_out(ioaddr, mmwoff(0, mmw_freeze), 1);
- mmc_read(ioaddr, 0, (u8 *) & m, sizeof(m));
+ mmc_read(ioaddr, 0, (u8 *) &m, sizeof(m));
mmc_out(ioaddr, mmwoff(0, mmw_freeze), 0);
/* Don't forget to update statistics */
@@ -1100,7 +1118,7 @@ static void wv_scb_show(unsigned long ioaddr)
/*
* Print the formatted status of the i82586's receive unit.
*/
-static void wv_ru_show(struct net_device * dev)
+static void wv_ru_show(struct net_device *dev)
{
printk(KERN_DEBUG
"##### WaveLAN i82586 receiver unit status: #####\n");
@@ -1115,7 +1133,7 @@ static void wv_ru_show(struct net_device * dev)
/*
* Display info about one control block of the i82586 memory.
*/
-static void wv_cu_show_one(struct net_device * dev, net_local * lp, int i, u16 p)
+static void wv_cu_show_one(struct net_device *dev, net_local * lp, int i, u16 p)
{
unsigned long ioaddr;
ac_tx_t actx;
@@ -1144,7 +1162,7 @@ static void wv_cu_show_one(struct net_device * dev, net_local * lp, int i, u16 p
/*
* Print status of the command unit of the i82586.
*/
-static void wv_cu_show(struct net_device * dev)
+static void wv_cu_show(struct net_device *dev)
{
net_local *lp = netdev_priv(dev);
unsigned int i;
@@ -1170,7 +1188,7 @@ static void wv_cu_show(struct net_device * dev)
/*
* Print the formatted status of the WaveLAN PCMCIA device driver.
*/
-static void wv_dev_show(struct net_device * dev)
+static void wv_dev_show(struct net_device *dev)
{
printk(KERN_DEBUG "dev:");
printk(" state=%lX,", dev->state);
@@ -1184,7 +1202,7 @@ static void wv_dev_show(struct net_device * dev)
* Print the formatted status of the WaveLAN PCMCIA device driver's
* private information.
*/
-static void wv_local_show(struct net_device * dev)
+static void wv_local_show(struct net_device *dev)
{
net_local *lp;
@@ -1245,7 +1263,7 @@ static inline void wv_packet_info(u8 * p, /* Packet to dump */
* This is the information which is displayed by the driver at startup.
* There are lots of flags for configuring it to your liking.
*/
-static void wv_init_info(struct net_device * dev)
+static void wv_init_info(struct net_device *dev)
{
short ioaddr = dev->base_addr;
net_local *lp = netdev_priv(dev);
@@ -1355,7 +1373,7 @@ static void wv_init_info(struct net_device * dev)
* num_addrs > 0 Multicast mode, receive normal and MC packets,
* and do best-effort filtering.
*/
-static void wavelan_set_multicast_list(struct net_device * dev)
+static void wavelan_set_multicast_list(struct net_device *dev)
{
net_local *lp = netdev_priv(dev);
@@ -1425,7 +1443,7 @@ static void wavelan_set_multicast_list(struct net_device * dev)
* (Note : it was a nice way to test the reconfigure stuff...)
*/
#ifdef SET_MAC_ADDRESS
-static int wavelan_set_mac_address(struct net_device * dev, void *addr)
+static int wavelan_set_mac_address(struct net_device *dev, void *addr)
{
struct sockaddr *mac = addr;
@@ -1614,7 +1632,7 @@ static int wv_set_frequency(unsigned long ioaddr, /* I/O port of the card */
return 0;
} else
- return -EINVAL; /* Bah, never get there... */
+ return -EINVAL; /*bah, never get there... */
}
/*------------------------------------------------------------------*/
@@ -1663,7 +1681,7 @@ static int wv_frequency_list(unsigned long ioaddr, /* I/O port of the card */
* address with our list, and if they match, get the statistics.
* Sorry, but this function really needs the wireless extensions.
*/
-static inline void wl_spy_gather(struct net_device * dev,
+static inline void wl_spy_gather(struct net_device *dev,
u8 * mac, /* MAC address */
u8 * stats) /* Statistics to gather */
{
@@ -1689,7 +1707,7 @@ static inline void wl_spy_gather(struct net_device * dev,
* With this histogram you may detect if one WaveLAN is really weak,
* or you may also calculate the mean and standard deviation of the level.
*/
-static inline void wl_his_gather(struct net_device * dev, u8 * stats)
+static inline void wl_his_gather(struct net_device *dev, u8 * stats)
{ /* Statistics to gather */
net_local *lp = netdev_priv(dev);
u8 level = stats[0] & MMR_SIGNAL_LVL;
@@ -1981,7 +1999,7 @@ static int wavelan_set_encode(struct net_device *dev,
}
if(!ret) {
- /* Basic checking... */
+ /*basic checking... */
if (wrqu->encoding.length == 8) {
/* Copy the key in the driver */
memcpy(psa.psa_encryption_key, extra,
@@ -2319,7 +2337,7 @@ static const iw_handler wavelan_handler[] =
NULL, /* SIOCGIWTXPOW */
NULL, /* SIOCSIWRETRY */
NULL, /* SIOCGIWRETRY */
- /* Bummer ! Why those are only at the end ??? */
+ /*bummer ! Why those are only at the end ??? */
wavelan_set_encode, /* SIOCSIWENCODE */
wavelan_get_encode, /* SIOCGIWENCODE */
};
@@ -2358,7 +2376,7 @@ static const struct iw_handler_def wavelan_handler_def =
* Get wireless statistics.
* Called by /proc/net/wireless
*/
-static iw_stats *wavelan_get_wireless_stats(struct net_device * dev)
+static iw_stats *wavelan_get_wireless_stats(struct net_device *dev)
{
unsigned long ioaddr = dev->base_addr;
net_local *lp = netdev_priv(dev);
@@ -2434,7 +2452,7 @@ static iw_stats *wavelan_get_wireless_stats(struct net_device * dev)
* (called by wv_packet_rcv())
*/
static void
-wv_packet_read(struct net_device * dev, u16 buf_off, int sksize)
+wv_packet_read(struct net_device *dev, u16 buf_off, int sksize)
{
net_local *lp = netdev_priv(dev);
unsigned long ioaddr = dev->base_addr;
@@ -2527,7 +2545,7 @@ wv_packet_read(struct net_device * dev, u16 buf_off, int sksize)
* (called in wavelan_interrupt()).
* Note : the spinlock is already grabbed for us.
*/
-static void wv_receive(struct net_device * dev)
+static void wv_receive(struct net_device *dev)
{
unsigned long ioaddr = dev->base_addr;
net_local *lp = netdev_priv(dev);
@@ -2710,7 +2728,7 @@ static void wv_receive(struct net_device * dev)
*
* (called in wavelan_packet_xmit())
*/
-static int wv_packet_write(struct net_device * dev, void *buf, short length)
+static int wv_packet_write(struct net_device *dev, void *buf, short length)
{
net_local *lp = netdev_priv(dev);
unsigned long ioaddr = dev->base_addr;
@@ -2842,7 +2860,7 @@ static int wv_packet_write(struct net_device * dev, void *buf, short length)
* to send the packet.
*/
static netdev_tx_t wavelan_packet_xmit(struct sk_buff *skb,
- struct net_device * dev)
+ struct net_device *dev)
{
net_local *lp = netdev_priv(dev);
unsigned long flags;
@@ -2854,7 +2872,7 @@ static netdev_tx_t wavelan_packet_xmit(struct sk_buff *skb,
#endif
/*
- * Block a timer-based transmit from overlapping.
+ *block a timer-based transmit from overlapping.
* In other words, prevent reentering this routine.
*/
netif_stop_queue(dev);
@@ -2905,7 +2923,7 @@ static netdev_tx_t wavelan_packet_xmit(struct sk_buff *skb,
* Routine to initialize the Modem Management Controller.
* (called by wv_hw_reset())
*/
-static int wv_mmc_init(struct net_device * dev)
+static int wv_mmc_init(struct net_device *dev)
{
unsigned long ioaddr = dev->base_addr;
net_local *lp = netdev_priv(dev);
@@ -3077,7 +3095,7 @@ static int wv_mmc_init(struct net_device * dev)
* Start the receive unit.
* (called by wv_hw_reset())
*/
-static int wv_ru_start(struct net_device * dev)
+static int wv_ru_start(struct net_device *dev)
{
net_local *lp = netdev_priv(dev);
unsigned long ioaddr = dev->base_addr;
@@ -3159,8 +3177,8 @@ static int wv_ru_start(struct net_device * dev)
* self-loop of the first transmit block.
*
* Here we create the list of send buffers used to transmit packets
- * between the PC and the command unit. For each buffer, we create a
- * buffer descriptor (pointing on the buffer), a transmit command
+ *between the PC and the command unit. For each buffer, we create a
+ *buffer descriptor (pointing on the buffer), a transmit command
* (pointing to the buffer descriptor) and a NOP command.
* The transmit command is linked to the NOP, and the NOP to itself.
* When we will have finished executing the transmit command, we will
@@ -3169,7 +3187,7 @@ static int wv_ru_start(struct net_device * dev)
*
* (called by wv_hw_reset())
*/
-static int wv_cu_start(struct net_device * dev)
+static int wv_cu_start(struct net_device *dev)
{
net_local *lp = netdev_priv(dev);
unsigned long ioaddr = dev->base_addr;
@@ -3270,7 +3288,7 @@ static int wv_cu_start(struct net_device * dev)
*
* (called by wv_hw_reset())
*/
-static int wv_82586_start(struct net_device * dev)
+static int wv_82586_start(struct net_device *dev)
{
net_local *lp = netdev_priv(dev);
unsigned long ioaddr = dev->base_addr;
@@ -3402,7 +3420,7 @@ static int wv_82586_start(struct net_device * dev)
*
* (called by wv_hw_reset(), wv_82586_reconfig(), wavelan_packet_xmit())
*/
-static void wv_82586_config(struct net_device * dev)
+static void wv_82586_config(struct net_device *dev)
{
net_local *lp = netdev_priv(dev);
unsigned long ioaddr = dev->base_addr;
@@ -3449,7 +3467,7 @@ static void wv_82586_config(struct net_device * dev)
tx_addr = txblock;
nop_addr = tx_addr + sizeof(tx);
tbd_addr = nop_addr + sizeof(nop);
- cfg_addr = tbd_addr + sizeof(tbd_t); /* beginning of the buffer */
+ cfg_addr = tbd_addr + sizeof(tbd_t); /*beginning of the buffer */
ias_addr = cfg_addr + sizeof(cfg);
mcs_addr = ias_addr + sizeof(ias);
@@ -3578,7 +3596,7 @@ static void wv_82586_config(struct net_device * dev)
* WaveLAN controller (i82586).
* (called by wavelan_close())
*/
-static void wv_82586_stop(struct net_device * dev)
+static void wv_82586_stop(struct net_device *dev)
{
net_local *lp = netdev_priv(dev);
unsigned long ioaddr = dev->base_addr;
@@ -3615,7 +3633,7 @@ static void wv_82586_stop(struct net_device * dev)
* 5. Start the LAN controller's receive unit
* (called by wavelan_interrupt(), wavelan_watchdog() & wavelan_open())
*/
-static int wv_hw_reset(struct net_device * dev)
+static int wv_hw_reset(struct net_device *dev)
{
net_local *lp = netdev_priv(dev);
unsigned long ioaddr = dev->base_addr;
@@ -3939,7 +3957,7 @@ static void wavelan_watchdog(struct net_device * dev)
* Configure and start up the WaveLAN PCMCIA adaptor.
* Called by NET3 when it "opens" the device.
*/
-static int wavelan_open(struct net_device * dev)
+static int wavelan_open(struct net_device *dev)
{
net_local *lp = netdev_priv(dev);
unsigned long flags;
@@ -3994,7 +4012,7 @@ static int wavelan_open(struct net_device * dev)
* Shut down the WaveLAN ISA card.
* Called by NET3 when it "closes" the device.
*/
-static int wavelan_close(struct net_device * dev)
+static int wavelan_close(struct net_device *dev)
{
net_local *lp = netdev_priv(dev);
unsigned long flags;
@@ -4040,7 +4058,7 @@ static const struct net_device_ops wavelan_netdev_ops = {
/*------------------------------------------------------------------*/
/*
* Probe an I/O address, and if the WaveLAN is there configure the
- * device structure
+ *device structure
* (called by wavelan_probe() and via init_module()).
*/
static int __init wavelan_config(struct net_device *dev, unsigned short ioaddr)
@@ -4114,7 +4132,7 @@ static int __init wavelan_config(struct net_device *dev, unsigned short ioaddr)
memset(netdev_priv(dev), 0, sizeof(net_local));
lp = netdev_priv(dev);
- /* Back link to the device structure. */
+ /*back link to the device structure. */
lp->dev = dev;
/* Add the device at the beginning of the linked list. */
lp->next = wavelan_list;
@@ -4377,7 +4395,7 @@ MODULE_LICENSE("GPL");
*
* Please send bug reports, updates, comments to:
*
- * Bruce Janson Email: bruce@xxxxxxxxxxxxxx
- * Basser Department of Computer Science Phone: +61-2-9351-3423
+ *bruce Janson Email: bruce@xxxxxxxxxxxxxx
+ *basser Department of Computer Science Phone: +61-2-9351-3423
* University of Sydney, N.S.W., 2006, AUSTRALIA Fax: +61-2-9351-3838
*/
--
1.6.0.4
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
