Search Linux Wireless

Re: FYI - new compat-wireless based on 2.6.33-rc4

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Ok, I see what's going on now. The openembedded recipe I'm working with didn't copy the udev stuff.

Adam Wozniak wrote:
Luis R. Rodriguez wrote:
BTW Haukes posted a fix for the compile build against ARM. Try that.
That patch applies to compat.git but you should be able to mangle it
to apply to compat-wireless easily too.
That worked, thank you.
OK so it failed here, you may want to try to debug udev stuff now
then, what distribution do you have? Where are your udev rules put?
Where is the original udev rule for firmware for your box?

You can debug udev stuff by using 'udevadm monitor'
I'm using openembedded.  Rules are in /etc/udev/rules.d
It contains a file 50-udev-default.rules with a line:

SUBSYSTEM=="firmware", ACTION=="add", RUN+="firmware.sh"

If I copy & paste and change the SUBSYSTEM to "compat_firmware" things seem to load ok.

--Adam

--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]
  Powered by Linux