Hi, These are the patches that have resulted from a one-week debug and implementation camp with TI. Mostly bug fixes and improvements, but also we now added support for a new version of the firmware. With these patches, the driver should be pretty much functional, even though there are still a couple of known bugs. In v2: * use channel max_power configuration instead of hacking the tx_power to 25dBm * removed some lame internal bug tags * fixed my own email address in one of the s-o-b tags Cheers, Luca. Juuso Oikarinen (15): wl1271: Configure smart-reflex paramter values. wl1271: Remove smart reflex ACX wl1271: Use slow rates for association messages wl1271: Fix event acknowledging functionality wl1271: prevent power save entry while not associated wl1271: Implement chipset boot retry wl1271: Add pre-power-on sleep wl1271: Remove beacon-loss-ind from PSM entry failure handling wl1271: Add rudimentary ad-hoc support wl1271: Change rates configured for templates wl1271: Fix supported rate management wl1271: Change booleans in struct wl1271 into a flags bitmask wl1271: Add support for acx_pm_config wl1271: Check vif for NULL when indicating beacon-loss wl1271: Prevent performing "join" before association Luciano Coelho (16): wl1271: updated radio parameters structure for newer firmwares wl1271: updated general parameters structure for newer firmwares wl1271: update radio and general parameters values wl1271: added radio parameters configuration values newer firmwares wl1271: use join command with dummy BSSID wl1271: remove workaround for disconnection wl1271: limit TX power to 25dBm for every channel wl1271: check result code from the join command wl1271: set null data template when BSSID is known wl1271: use the correct macro when setting the basic rates wl1271: implement dco itrim parameters setting wl1271: fix one typo in the rx_rssi_and_proc_compens values wl1271: add gpio_power file in debugfs to power the chip on and off wl1271: upload only the first 468 bytes from the NVS file wl1271: some new configuration values according to new reference wl1271: use channel 1 when configuring the data path drivers/net/wireless/wl12xx/wl1271.h | 35 +- drivers/net/wireless/wl12xx/wl1271_acx.c | 134 ++++---- drivers/net/wireless/wl12xx/wl1271_acx.h | 37 +- drivers/net/wireless/wl12xx/wl1271_boot.c | 8 +- drivers/net/wireless/wl12xx/wl1271_cmd.c | 67 +++-- drivers/net/wireless/wl12xx/wl1271_cmd.h | 33 ++- drivers/net/wireless/wl12xx/wl1271_conf.h | 100 +++--- drivers/net/wireless/wl12xx/wl1271_debugfs.c | 62 ++++ drivers/net/wireless/wl12xx/wl1271_event.c | 20 +- drivers/net/wireless/wl12xx/wl1271_event.h | 2 +- drivers/net/wireless/wl12xx/wl1271_init.c | 12 +- drivers/net/wireless/wl12xx/wl1271_main.c | 482 ++++++++++++++++---------- drivers/net/wireless/wl12xx/wl1271_ps.c | 15 +- drivers/net/wireless/wl12xx/wl1271_tx.c | 43 +++- 14 files changed, 680 insertions(+), 370 deletions(-) -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html