From: Juuso Oikarinen <juuso.oikarinen@xxxxxxxxx>
While not associated, default the data rates to 1 and 2mbps, so that only
those rates will be used for association related message transfer. Once
associated, configure the full rate-set supported by the AP.
Signed-off-by: Juuso Oikarinen <juuso.oikarinen@xxxxxxxxx>
Reviewed-by: Luciano Coelho <luciano.coelho@xxxxxxxxx>
Signed-off-by: Luciano Coelho <luciano.coelho@xxxxxxxxx>
---
drivers/net/wireless/wl12xx/wl1271.h | 2 --
drivers/net/wireless/wl12xx/wl1271_conf.h | 3 ++-
drivers/net/wireless/wl12xx/wl1271_init.c | 2 +-
drivers/net/wireless/wl12xx/wl1271_main.c | 8 ++++++--
4 files changed, 9 insertions(+), 6 deletions(-)
diff --git a/drivers/net/wireless/wl12xx/wl1271.h b/drivers/net/wireless/wl12xx/wl1271.h
index 8dfc9ec..4b5ddba 100644
--- a/drivers/net/wireless/wl12xx/wl1271.h
+++ b/drivers/net/wireless/wl12xx/wl1271.h
@@ -107,8 +107,6 @@ enum {
CFG_RX_CTL_EN | CFG_RX_BCN_EN | \
CFG_RX_AUTH_EN | CFG_RX_ASSOC_EN)
-#define WL1271_DEFAULT_BASIC_RATE_SET (CONF_TX_RATE_MASK_ALL)
-
#define WL1271_FW_NAME "wl1271-fw.bin"
#define WL1271_NVS_NAME "wl1271-nvs.bin"
#define WL1271_NVS_LEN 468
diff --git a/drivers/net/wireless/wl12xx/wl1271_conf.h b/drivers/net/wireless/wl12xx/wl1271_conf.h
index c87ae56..5d1b5b6 100644
--- a/drivers/net/wireless/wl12xx/wl1271_conf.h
+++ b/drivers/net/wireless/wl12xx/wl1271_conf.h
@@ -258,7 +258,8 @@ struct conf_rx_settings {
#define CONF_TX_MAX_RATE_CLASSES 8
#define CONF_TX_RATE_MASK_UNSPECIFIED 0
-#define CONF_TX_RATE_MASK_ALL 0x1eff
+#define CONF_TX_RATE_MASK_BASIC (CONF_HW_BIT_RATE_1MBPS | \
+ CONF_HW_BIT_RATE_2MBPS)
#define CONF_TX_RATE_RETRY_LIMIT 10
struct conf_tx_rate_class {
diff --git a/drivers/net/wireless/wl12xx/wl1271_init.c b/drivers/net/wireless/wl12xx/wl1271_init.c
index 7bfd6c6..c67889d 100644
--- a/drivers/net/wireless/wl12xx/wl1271_init.c
+++ b/drivers/net/wireless/wl12xx/wl1271_init.c
@@ -284,7 +284,7 @@ int wl1271_hw_init(struct wl1271 *wl)
goto out_free_memmap;
/* Configure TX rate classes */
- ret = wl1271_acx_rate_policies(wl, WL1271_DEFAULT_BASIC_RATE_SET);
+ ret = wl1271_acx_rate_policies(wl, CONF_TX_RATE_MASK_BASIC);
if (ret < 0)
goto out_free_memmap;
diff --git a/drivers/net/wireless/wl12xx/wl1271_main.c b/drivers/net/wireless/wl12xx/wl1271_main.c
index bd1a491..d229e57 100644
--- a/drivers/net/wireless/wl12xx/wl1271_main.c
+++ b/drivers/net/wireless/wl12xx/wl1271_main.c
@@ -1180,6 +1180,11 @@ static int wl1271_op_config(struct ieee80211_hw *hw, u32 changed)
wl1271_unjoin_channel(wl);
else
wl1271_join_channel(wl, channel);
+
+ if (conf->flags & IEEE80211_CONF_IDLE) {
+ wl->basic_rate_set = CONF_TX_RATE_MASK_BASIC;
+ wl1271_acx_rate_policies(wl, CONF_TX_RATE_MASK_BASIC);
+ }
}
/* if the channel changes while joined, join again */
@@ -1568,7 +1573,6 @@ static void wl1271_op_bss_info_changed(struct ieee80211_hw *hw,
}
} else {
/* use defaults when not associated */
- wl->basic_rate_set = WL1271_DEFAULT_BASIC_RATE_SET;
wl->aid = 0;
}
@@ -1897,7 +1901,7 @@ static int __devinit wl1271_probe(struct spi_device *spi)
wl->psm_entry_retry = 0;
wl->tx_queue_stopped = false;
wl->power_level = WL1271_DEFAULT_POWER_LEVEL;
- wl->basic_rate_set = WL1271_DEFAULT_BASIC_RATE_SET;
+ wl->basic_rate_set = CONF_TX_RATE_MASK_BASIC;
wl->band = IEEE80211_BAND_2GHZ;
wl->vif = NULL;
wl->joined = false;
--
1.6.3.3
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
