Am Wed October 21 2009 01:18:11 schrieb Johannes Berg: > On Tue, 2009-10-20 at 14:13 +0200, Holger Schurig wrote: > > Allows a WLAN driver to signal current noise level: > > > > # iw eth1 link > > Connected to 00:13:19:80:da:30 (on eth1) > > SSID: SSID > > freq: 2437 > > RX: 424 bytes (5 packets) > > TX: 0 bytes (0 packets) > > signal: -49 dBm > > noise: -93 dBm > > tx bitrate: 11.0 MBit/s > > > > Signed-off-by: Holger Schurig <hs4233@xxxxxxxxxxxxxxxxxxxx> > > NACKed-by: Johannes Berg <johannes@xxxxxxxxxxxxxxxx> > > As discussed previously, noise is not a property of a station. Noise it not a property of a link between two stations, but a property of the local station alone (the point where the noise was measured). Do we have a netlink part to put in properties like this ? Henning Rogge -- Diplom-Informatiker Henning Rogge , Fraunhofer-Institut für Kommunikation, Informationsverarbeitung und Ergonomie FKIE Kommunikationssysteme (KOM) Neuenahrer Straße 20, 53343 Wachtberg, Germany Telefon +49 228 9435-263, Fax +49 228 9435 685 mailto:henning.rogge@xxxxxxxxxxxxxxxxxx http://www.fkie.fraunhofer.de GPG: E1C6 0914 490B 3909 D944 F80D 4487 C67C 55EC CFE0
Attachment:
signature.asc
Description: This is a digitally signed message part.
