On Fri, Sep 18, 2009 at 17:00, Ivo Van Doorn <ivdoorn@xxxxxxxxx> wrote: > On Fri, Sep 18, 2009 at 8:37 AM, Julian Calaby <julian.calaby@xxxxxxxxx> wrote: >> 2009/9/16 Ivo van Doorn <ivdoorn@xxxxxxxxx>: >>> Hi, >>> >>>> Hi; my syslog has many entries like this since the upgrade to 2.6.31 >>>> >>>> phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). >>>> >>>> Sometimes the driver just start spamming like crazy sometimes is at less rate >>>> sometimes it does not appear. >>>> >>>> I'm running 2.6.31 with a revert [1] config follows. If more info is needed >>>> just ask >>>> >>>> [1] http://bugzilla.kernel.org/show_bug.cgi?id=13362 >>> >>> Try disabling powersaving, >>> >>> iwconfig wlan0 power off >> >> I have an identical problem, which is fixed by this command. >> >> It is possible to detect that the chip doesn't, for whatever reason, >> support powersaving and disable it in the driver? > > Well I simply have to: > a) fix the driver to handle powersaving better > b) disable powersaving support for the driver > > It will probably be (b) first followed by (a) much later if I ever > get the time to look into the issue. Fair enough. I'll take a look if I get an opportunity. Thanks, -- Julian Calaby Email: julian.calaby@xxxxxxxxx .Plan: http://sites.google.com/site/juliancalaby/ -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html