On Fri, Sep 18, 2009 at 8:37 AM, Julian Calaby <julian.calaby@xxxxxxxxx> wrote: > 2009/9/16 Ivo van Doorn <ivdoorn@xxxxxxxxx>: >> Hi, >> >>> Hi; my syslog has many entries like this since the upgrade to 2.6.31 >>> >>> phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). >>> >>> Sometimes the driver just start spamming like crazy sometimes is at less rate >>> sometimes it does not appear. >>> >>> I'm running 2.6.31 with a revert [1] config follows. If more info is needed >>> just ask >>> >>> [1] http://bugzilla.kernel.org/show_bug.cgi?id=13362 >> >> Try disabling powersaving, >> >> iwconfig wlan0 power off > > I have an identical problem, which is fixed by this command. > > It is possible to detect that the chip doesn't, for whatever reason, > support powersaving and disable it in the driver? Well I simply have to: a) fix the driver to handle powersaving better b) disable powersaving support for the driver It will probably be (b) first followed by (a) much later if I ever get the time to look into the issue. Ivo -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html