Hi Maciej, On Wed, 2009-09-16 at 10:36 -0700, Maciej Rutecki wrote: > 2009/9/16 reinette chatre <reinette.chatre@xxxxxxxxx>: > > > > The important information is not what you posted here, but still in the > > dmesg file you provided. In that log we see the following right before > > the warnings: > > > > [ 163.126590] wlan0: direct probe to AP 00:1b:11:f6:0f:28 (try 1) > > [ 163.130027] wlan0 direct probe responded > > [ 163.130032] wlan0: authenticate with AP 00:1b:11:f6:0f:28 (try 1) > > [ 163.131924] wlan0: authenticated > > [ 163.131952] wlan0: associate with AP 00:1b:11:f6:0f:28 (try 1) > > [ 163.134325] wlan0: RX ReassocResp from 00:1b:11:f6:0f:28 (capab=0x431 status=0 aid=1) > > [ 163.134331] wlan0: associated > > [ 163.155938] wlan0: deauthenticating by local choice (reason=3) > > > > It shows that association was successful, but something in userspace requested a disconnect. > > Hmm. Yes, connect takes more time than in 2.6.31. You mentioned that you tried to connect to two networks. From the logs I can understand that the connection to the first network took a long time. This is also not due to the warnings you encountered (the warnings only showed up after you disconnected from second network). The reason why the connection to the first network took so long was some protocol exchange problems with AP. Here is the relevant information from your log: [ 117.741190] wlan0: deauthenticating by local choice (reason=3) [ 117.741308] wlan0: direct probe to AP 00:1b:11:f6:0f:28 (try 1) [ 117.745515] wlan0 direct probe responded [ 117.745523] wlan0: authenticate with AP 00:1b:11:f6:0f:28 (try 1) [ 117.747256] wlan0: authenticated [ 117.747288] wlan0: associate with AP 00:1b:11:f6:0f:28 (try 1) [ 117.749529] wlan0: RX AssocResp from 00:1b:11:f6:0f:28 (capab=0x431 status=0 aid=1) [ 117.749536] wlan0: associated [ 121.404153] wlan0: deauthenticated from 00:1b:11:f6:0f:28 (Reason: 6) [ 124.123203] wlan0: direct probe to AP 00:1b:11:f6:0f:28 (try 1) [ 124.126121] wlan0 direct probe responded [ 124.126129] wlan0: authenticate with AP 00:1b:11:f6:0f:28 (try 1) [ 124.127876] wlan0: authenticated [ 124.127906] wlan0: associate with AP 00:1b:11:f6:0f:28 (try 1) [ 124.130164] wlan0: RX ReassocResp from 00:1b:11:f6:0f:28 (capab=0x431 status=0 aid=1) [ 124.130172] wlan0: associated [ 128.263997] wlan0: disassociated (Reason: 3) [ 128.280067] wlan0: deauthenticating by local choice (reason=3) [ 130.968263] wlan0: direct probe to AP 00:1b:11:f6:0f:28 (try 1) [ 130.970685] wlan0 direct probe responded [ 130.970692] wlan0: authenticate with AP 00:1b:11:f6:0f:28 (try 1) [ 130.972497] wlan0: authenticated [ 130.972529] wlan0: associate with AP 00:1b:11:f6:0f:28 (try 1) [ 130.974780] wlan0: RX ReassocResp from 00:1b:11:f6:0f:28 (capab=0x431 status=0 aid=1) [ 130.974787] wlan0: associated [ 134.511593] wlan0: deauthenticated from 00:1b:11:f6:0f:28 (Reason: 6) [ 137.216183] wlan0: direct probe to AP 00:1b:11:f6:0f:28 (try 1) [ 137.218606] wlan0 direct probe responded [ 137.218614] wlan0: authenticate with AP 00:1b:11:f6:0f:28 (try 1) [ 137.220520] wlan0: authenticated [ 137.220555] wlan0: associate with AP 00:1b:11:f6:0f:28 (try 1) [ 137.222808] wlan0: RX ReassocResp from 00:1b:11:f6:0f:28 (capab=0x431 status=0 aid=1) [ 137.222815] wlan0: associated [ 140.758586] wlan0: deauthenticated from 00:1b:11:f6:0f:28 (Reason: 6) [ 143.513364] wlan0: direct probe to AP 00:1b:11:f6:0f:28 (try 1) [ 143.524448] wlan0 direct probe responded [ 143.524456] wlan0: authenticate with AP 00:1b:11:f6:0f:28 (try 1) [ 143.526207] wlan0: authenticated [ 143.526238] wlan0: associate with AP 00:1b:11:f6:0f:28 (try 1) [ 143.540625] wlan0: RX ReassocResp from 00:1b:11:f6:0f:28 (capab=0x431 status=0 aid=1) [ 143.540632] wlan0: associated [ 162.901260] b44: eth0: powering down PHY [ 162.919757] wlan0: deauthenticating by local choice (reason=3) As you can see the AP keeps deauthenticating you with Reason 6. This means "Incorrect frame type or subtype received from unauthenticated station". Can you try to connect using wpa_supplicant? When you do make sure there is no other network managing applications (like network manager, wicd, or even other instances of wpa_supplicant etc) running. The connection to the second network went very fast - completed in one second. But a disconnection was requested locally just as fast. Do you perhaps have more than one network managing application running? Reinette -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
