On Mo, 2009-09-14 at 21:43 +0200, Gábor Stefanik wrote: > Always send patches to John Linville, and CC linux-wireless. Ok, the last try ... As I've seen Gàbor's patch, I noticed that my previous patch was bullshit. This patch should work: (see: http://bcm-v4.sipsolutions.net/802.11/PHY/Anacore) Signed-off-by: Thomas Ilnseher <illth@xxxxxx> diff -uNr b/drivers/net/wireless/b43/phy_lp.c a/drivers/net/wireless/b43/phy_lp.c --- b/drivers/net/wireless/b43/phy_lp.c 2009-09-14 06:14:18.000000000 +0200 +++ a/drivers/net/wireless/b43/phy_lp.c 2009-09-14 21:03:15.158507573 +0200 @@ -2228,6 +2228,16 @@ return B43_TXPWR_RES_DONE; } +void b43_lpphy_op_switch_analog(struct b43_wldev *dev, bool on) +{ + if (on) { + b43_phy_mask(dev, B43_LPPHY_AFE_CTL_OVR, 0xfff8); + } else { + b43_phy_set(dev, B43_LPPHY_AFE_CTL_OVRVAL, 0x0007); + b43_phy_set(dev, B43_LPPHY_AFE_CTL_OVR, 0x0007); + } +} + const struct b43_phy_operations b43_phyops_lp = { .allocate = b43_lpphy_op_allocate, .free = b43_lpphy_op_free, @@ -2239,7 +2249,7 @@ .radio_read = b43_lpphy_op_radio_read, .radio_write = b43_lpphy_op_radio_write, .software_rfkill = b43_lpphy_op_software_rfkill, - .switch_analog = b43_phyop_switch_analog_generic, + .switch_analog = b43_lpphy_op_switch_analog, .switch_channel = b43_lpphy_op_switch_channel, .get_default_chan = b43_lpphy_op_get_default_chan, .set_rx_antenna = b43_lpphy_op_set_rx_antenna, -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
