Search Linux Wireless

Re: [PATCH V2] nl80211 connect API support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, 2009-09-04 at 02:44 +0800, Jouni Malinen wrote:
> It looks like there is still some misunderstanding regarding the SME
> design in wpa_supplicant. It was designed to be used when the driver
> does provide the separate authentication and association commands. There
> is not much point in trying to convert the SME implementation to work
> with the case where connect command is used. It is just duplicating
> functionality that is already present in the old associate
> (pre-auth/assoc SME case) operation.

I searched WPA_DRIVER_FLAGS_SME is set only by driver_nl80211. So I
thought you might also want the connect API more visible for the whole
wpa_supplicant. But it turns I was wrong.

> I took about half of the patch, i.e., the changes to add driver
> capability query, connect events, and actual connect/disconnect
> functions. Instead of the changes in sme.c and driver interface, I glued
> the new functions together within driver_nl80211.c since rest of
> wpa_supplicant do not really need to (nor should) know about yet another
> driver operation for connecting in a single step. The driver
> capabilities are used to select which functions to use within
> driver_nl80211.c. Since the WPA_DRIVER_FLAGS_SME is now set based on
> driver capabilities, core wpa_supplicant code is able to switch between
> the SME (separate auth/assoc calls) and single associate ("connect" in
> nl80211 terminology) call.
> 
> I did not go through the details of sme_connect() function, but I would
> expect that it was providing the same conversion from configuration to
> driver parameters that was already done in wpa_supplicant.c. If there
> was something else there, it should be added to the version in
> wpa_supplicant.c instead of introducing a new, duplicated function.
> 
> It looks like the end result works fine at least with mac80211_hwsim
> (with hardcoded driver capability detection that does not find the
> separate authenticate command). This version is now in my git repository
> and it would be good if you could verify that it works with your driver,
> too.

I confirm it also works for iwmc3200wifi. Tested for WEP, PSK and EAP.

Thanks,
-yi

--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]
  Powered by Linux