On Mon, 2009-08-24 at 12:43 -0700, Luis R. Rodriguez wrote: > > Ok, but I don't see the warning after that. > > Well it was in the e-mail. Here is some log, not sure if it was the > exact same one from that day but it does seem the capture the entire > thing: > > [ 1058.261102] No probe response from AP <AP-mac-address> after 500ms, try 1 > [ 1058.761100] No probe response from AP <AP-mac-address> after 500ms, try 2 > [ 1059.261122] No probe response from AP <AP-mac-address> after 500ms, try 3 > [ 1059.761105] No probe response from AP <AP-mac-address> after 500ms, try 4 > [ 1060.261105] No probe response from AP <AP-mac-address> after > 500ms, disconnecting. > [ 1060.264257] phy1: device now idle > [ 1060.268293] phy1: Removed STA <AP-mac-address> > [ 1060.290788] phy1: Destroyed STA <AP-mac-address> > [ 1060.290961] wlan6: deauthenticating by local choice (reason=3) > [ 1060.291025] ------------[ cut here ]------------ > [ 1060.291057] WARNING: at net/wireless/sme.c:610 > __cfg80211_disconnected+0x1fb/0x260 [cfg80211]() Well, yes, I just can't reproduce the warning. Need better instructions how you do that. johannes
Attachment:
signature.asc
Description: This is a digitally signed message part
