Search Linux Wireless

Re: [ath9k-devel] hostapd not sending beacons, and no traffic.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



If anyone can help me with this, I'd appreciate it. I thin the issue may be with the TX, but I'm not sure where to look next. I'm willing to test any patches.
Using wireless-testing from today, but the same occurs on 2.6.30-rc6

I simplified my test case and what fails still is copying from one interface to another when routing. I now have no bridges.

# ip addr
1: lo: <LOOPBACK,UP,10000> mtu 16436 qdisc noqueue
  link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
  inet 127.0.0.1/8 scope host lo
2: eth1: <BROADCAST,MULTICAST,UP,10000> mtu 1500 qdisc pfifo_fast qlen 1000
  link/ether 00:13:01:00:02:18 brd ff:ff:ff:ff:ff:ff
  inet 192.168.10.55/24 brd 192.168.10.255 scope global eth1
3: eth0: <BROADCAST,MULTICAST,UP,10000> mtu 1500 qdisc pfifo_fast qlen 100
  link/ether 9e:b6:45:72:d7:98 brd ff:ff:ff:ff:ff:ff
4: wmaster0: <UP,10000> mtu 0 qdisc pfifo_fast qlen 1000
  link/ieee802.11 00:0e:8e:15:6e:16 brd 00:00:00:00:00:00
5: wlan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop qlen 1000
  link/ether 00:0e:8e:15:6e:16 brd ff:ff:ff:ff:ff:ff
6: wlan0_0: <BROADCAST,MULTICAST,UP,10000> mtu 1500 qdisc cbq qlen 1000
  link/ether 00:0e:8e:15:6e:16 brd ff:ff:ff:ff:ff:ff
  inet 192.168.1.1/24 brd 192.168.1.255 scope global wlan0_0
8: mon.wlan0_0: <BROADCAST,MULTICAST,UP,10000> mtu 1500 qdisc pfifo_fast qlen 1000
  link/[803] 00:0e:8e:15:6e:16 brd ff:ff:ff:ff:ff:ff



# ip route
192.168.1.0/24 dev wlan0_0  proto kernel  scope link  src 192.168.1.1
192.168.10.0/24 dev eth1  proto kernel  scope link  src 192.168.10.55
127.0.0.0/8 dev lo  scope link
default via 192.168.10.254 dev eth1  proto static


Downloading a 40MB file from a http server on eth1 lan to wifi client on access point wlan0_0, The connection at some point of the http file download fails. Usually I can download at least 300KB of data before the error occurs.

hostapd.conf:

interface=wlan0_0
driver=nl80211
logger_syslog=-1
logger_syslog_level=2
logger_stdout=0
logger_stdout_level=2
dump_file=/tmp/hostapd/hostapd.0.dump
ssid=karl
channel=1
hw_mode=g
auth_algs=1
macaddr_acl=0
accept_mac_file=/tmp/hostapd/hostapd.wlan0_0.accept
deny_mac_file=/tmp/hostapd/hostapd.wlan0_0.deny
ignore_broadcast_ssid=0
wpa=3
wpa_passphrase=hiramoto
wpa_key_mgmt=WPA-PSK
wpa_pairwise=TKIP CCMP
ieee8021x=0
eap_server=0


600KB of kernel log messages with modprobe ath9k debug=0xFFFFFFFF
at: http://karl.hiramoto.org/ath9k.txt


Thanks.
--
Karl
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]
  Powered by Linux